| Food Contact Substance: |
Methyl acrylate-divinylbenzene-diethylene glycol divinyl ether terpolymer, aminolyzed with dimethylaminopropylamine and partially quaternized with methyl chloride. (CAS Reg. No. 65997-24-2).
|
| |
| Notifier: |
Rohm and Haas Company
|
| |
| Manufacturer: |
Rohm and Haas Company
|
| |
| Intended Use: |
For use in treating water and aqueous food only of the types identified under categories I, II, and VI-B in Table 1.
|
| |
| Effective Date: |
08/31/2002
|
| |
| Limitations/Specifications: |
a) The temperature of the water or food passing through the FCS must be maintained at 50°C or less, and the flow rate of the water or food passing through the FCS must not be less than 0.5 gallon per cubic foot per minute; or b) Extracts of the FCS will be found to contain no more than 1 mg/kg dimethylaminopropylamine in each of the food simulants, distilled water and 10 percent ethanol, when, following washing and pretreatment of the resin in accordance with 21 CFR 173.25 (Ion- exchange resins)(c)(1), the resin is subjected to the test described in 21 CFR 173.25(b)(2)(ii)(B).
|
| |
| Environmental Impact Decisions: |
Environmental Decisions Site
|
