• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

Inventory of Effective Food Contact Substance (FCS) Notifications

  • Print
  • Share
  • E-mail
-
 

FCN No. 772

 
Return to Listing
 
Food Contact Substance:  A mixture of one or more of tripropylene glycol diacrylate (CAS Reg. No. 42978-66-5), trimethylolpropane triacrylate (CAS Reg. No. 15625-89-5), trimethylolpropane ethoxylate triacrylate (CAS Reg. No. 28961-43-5), and bisphenol A diglycidyl ether diacrylate (CAS Reg. No. 4687-94-9, 53814-24-7, 55127-80-5, 55818-57-0 or 37625-93-7), and optionally the difunctional alpha-hydroxy ketone described in the notification as a photoinitiator. The mixture will be cured by either ultraviolet (UV) or electron beam (EB) irradiation.
 
Notifier:  Alcan Packaging, Alcoa, Inc., Allnex USA, Inc., Amgraph Packaging, Inc., Ashland Specialty Chemical Company, Bayer Polymers LLC, Bostik-Findley, Bryce Corporation, Coating and Adhesives Corporation, Crown Cork & Seal, Dart Container, Dixie Packaging, Energy Sciences Inc., Fujihunt, Fusion UV Systems, Inc., Gidue SpA, Graphic Packaging Inc., H.B Fuller Company, IGM Resins, INX International Ink Co., Lamberti, s.p.a., Liofol, MeadWestvaco, Nordson Corporation, Petroferm Inc., Pliant Corporation, PPG Industries, Inc., Printpack Inc., Rahn USA Corporation, Rock-Tenn Company, Rohm and Haas Company, Sartomer Company, Sealed Air, Siegwerk Group, Valspar Corporation
 
Manufacturer:  Alcan Packaging, Alcoa, Inc., Allnex USA, Inc., Amgraph Packaging, Inc., Ashland Specialty Chemical Company, Bayer Polymers LLC, Bostik-Findley, Bryce Corporation, Coating and Adhesives Corporation, Crown Cork & Seal, Dart Container, Dixie Packaging, Energy Sciences Inc., Fujihunt, Fusion UV Systems, Inc., Gidue SpA, Graphic Packaging Inc., H.B Fuller Company, IGM Resins, INX International Ink Co., Lamberti, s.p.a., Liofol, MeadWestvaco, Nordson Corporation, Petroferm Inc., Pliant Corporation, PPG Industries, Inc., Printpack Inc., Rahn USA Corporation, Rock-Tenn Company, Rohm and Haas Company, Sartomer Company, Sealed Air, Siegwerk Group, Valspar Corporation
 
Intended Use:  To be used as coatings (including inks) or components of coatings (including inks) on polymeric substrates, paper and paperboard, metal substrates, or as a component in adhesives.
 
Effective Date:  03/08/2008
 
Limitations/Specifications:  The cured resins may include other substances permitted for the intended use by regulation under 21 CFR. The finished coating, when tested according to the compliance test protocol set forth in the FCN, shall yield a migration level for each monomer and photoinitiator used that is the subject of this FCN that does not exceed 10 micrograms per square inch (ug/in2) and the total level of nonvolatile extractables derived from the finished coating will not exceed 10 ug/in2, after correction for the migration levels for each monomer and photoinitiator used. For use in contact with all food types under Conditions of Use A through H, as described in Tables 1 and 2. The food contact articles containing the coatings will meet all applicable regulations under 21 CFR.
 
Environmental Impact Decisions:  Environmental Decisions Site
-
-