| Food Contact Substance: |
Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) prepared by the condensation of dimethyl terephthalate or terephthalic acid and ethylene glycol with one or more of the following: dimethyl isophthalate, isophthalic acid, and diethylene glycol. The finished polymer shall contain a total of not more than 10 mole-percent of diethylene glycol and isophthalate units, with the diethylene glycol content expressed as a mole-percent of the total glycol units and the isophthalate content expressed as a mole-percent of the total isophthalate/terephthalate units.
|
| |
| Notifier: |
M&G Polymers, USA LLC
Eastman Chemical Company
E.I. Du Pont de Nemours & Co.
DuPont Polyester Enterprise and DuPont Teijin Films
Wellman, Inc.
Indorama Ventures USA Inc. and its stewarded affiliates around the world.
|
| |
| Manufacturer: |
M&G Polymers, USA LLC
Eastman Chemical Company
E.I. Du Pont de Nemours & Co.
DuPont Polyester Enterprise and DuPont Teijin Films
Wellman, Inc.
Indorama Ventures USA Inc. and its stewarded affiliates around the world.
|
| |
| Intended Use: |
For use as films or articles intended for contact with aqueous, acidic, low-alcohol, and fatty foods under Conditions of Use A through H as described in Table 2, and for use in contact with high-alcohol foods under conditions of use E through G as described in Table 2.
|
| |
| Effective Date: |
10/05/2000
|
| |
| Limitations/Specifications: |
The finished food-contact film or article must meet any applicable specifications, and is subject to all applicable conditions of use cited in title 21 CFR 177.1630(f), (g), and/or (j).
|
| |
| Environmental Impact Decisions: |
Environmental Decisions Site
|
