The database lists effective premarket notifications for food contact substances that have been demonstrated to be safe for their intended use.
The list includes the food contact substance (FCS), the notifier, the manufacturer of the FCS, the intended use, the limitations on the conditions of use
for the FCS and its specifications, the effective date, and its environmental decision. Under section 409(h)(2)(C) of the Federal Food, Drug, and Cosmetic
Act (21 U.S.C. 348 (h)(2)(C)) a food contact notification (FCN) is only effective for the manufacturer or supplier identified in the notification. Persons
who market a FCS based on an effective notification must be able to demonstrate that the notification is effective for their food contact substance.
All persons who purchase a food contact substance manufactured or supplied by a manufacturer or supplier identified in an effective notification may
rely on that notification to legally market or use the food contact substance for the use that is the subject of the notification, consistent with any limitations in that notification.
Additional information about Food Contact Substances and the Definitions of Food Types and Conditions of Use
are available on the FCS Program page.
Records shown on this page: This page is a partial listing of all records in the database. Additional pages/records are available for selection at the bottom of the page.
To obtain all the information on a Food Contact Substance, select the FCN number (FCN) in the first column of the database to reveal the additional information.
To view all records in the database select the All button at the bottom of the page. To search for a specific food ingredient, enter the term in the Filter box and select Show Items
to display only those records that contain the selected term. The Final Environmental Impact Decisions for Food Contact Notifications are also available.
Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid and 4-hydroxybenzoic acid. The copolymers have the CAS name 2-naphthalenecarboxylic acid, 6-hydroxy-, polymer with 4-hydroxybenzoic acid (CAS Reg. No. 81843-52-9). The copolymers should be manufactured and characterized as described in the notification.
Polyacrylic acid homopolymer, or copolymer of acrylic acid and up to 10 percent alkyl (C10-C30) methacrylate, crosslinked with either allyl sucrose (CAS Reg. No. 68784-14-5) or allyl pentaerythritol (CAS Reg. No. 91648-24-7); optionally contains up to 7 percent block copolymer surfactant of fatty acid (C12-C18) and polyethylene glycol.
An approximately 1:1 ratio mixture of hydroxymethyl-5,5-dimethylhydantoin (MMDMH) (CAS Reg. No. 27636-82-4) and 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (DMDMH) (CAS Reg. No. 6440-58-0), containing up to 8.5 percent by weight dimethylhydantoin.
Aromatic petroleum hydrocarbon resin, hydrogenated (CAS Reg. No. 88526-47-0), produced by the catalytic polymerization of aromatic substituted olefins from low boiling distillates of cracked petroleum stocks with a boiling point no greater than 220°C (428°F), and the subsequent catalytic reduction of the resulting aromatic petroleum hydrocarbon resin.
Piperylene/2-methyl-2-butene copolymer resins (CAS Reg. No. 26813-14-9) and Piperylene/2-methyl-2-butene/alpha-methylstyrene terpolymer resins (CAS Reg. No. 62258-49-5), and as further described in the identity and manufacturing sections of the notification.
1. Cellulose, regenerated, polymer with epichlorohydrin, 2-(diethylamino) ethyl 2-hydroxypropyl ether, (CAS Reg. No. 343845-30-7) (High Capacity). The FCS is also referred to as diethylaminoethyl (DEAE) ion exchange cellulose resin (High Capacity). 2. Cellulose, regenerated, polymer with epichlorohydrin, 2-(diethylamino) ethyl ether, (CAS Reg. No. 343846-01-5) (Medium Capacity). The FCS is also referred to as diethylaminoethyl (DEAE) ion exchange cellulose resin (Medium Capacity).
Ethene, tetrafluoro-, polymer with 1,1-difluoroethene and trifluoro(trifluoromethoxy)ethene (CAS Reg. No. 56357-87-0) modified with 1,3,5-triallyl isocyanurate (TAIC) and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene, manufactured and characterized as further described in the notification.
A copolymer of tetrafluoroethylene (TFE) and perfluoromethylvinyl ether (PFMVE) (CAS Reg. No. 26425-79-6) modified with 1,3,5-triallyl isocyanurate (TAIC) and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene, manufactured and characterized as further described in the notification.
1-Propene,1,1,2,3,3,3-hexafluoro-, polymer with 1,1-difluoroethene and tetrafluoroethene (CAS Reg. No. 25190-89-0) modified with triallyl isocyanurate and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene, manufactured and characterized as further described in the notification.
1,9-Decadiene,3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-, polymer with tetrafluoroethene and trifluoro(trifluoromethoxy)ethene (CAS Reg. No. 190062-24-9), manufactured and characterized as further described in the notification.
Styrene block copolymers with 1,3-butadiene, containing not less than 71 weight percent of polymer units derived from styrene, to which may be optionally added octadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate (CAS Reg. No. 2082-79-3) at levels not to exceed 0.25 percent by weight of the styrene block polymer.
Polyester-epoxy-urethane adhesives formulated from: 1. Polyester resins described in 21 CFR 177.1390(c)(2)(v)(a). 1,6-Hexanediol may also be used as an optional polyhydric alcohol. 2. Optional epoxy resin listed in 21 CFR 175.300(b)(3)(viii)(a) and comprising up to 30 percent by weight of the cured adhesive. 3. Urethane cross-linking agent, as described in 21 CFR 177.1390(c)(2)(v)(c). 4. Optional trimethoxysilane coupling agents containing epoxy and/or ether groups not to exceed 3 percent by weight of the cured adhesive.