The database lists effective premarket notifications for food contact substances that have been demonstrated to be safe for their intended use.
The list includes the food contact substance (FCS), the notifier, the manufacturer of the FCS, the intended use, the limitations on the conditions of use
for the FCS and its specifications, the effective date, and its environmental decision. Under section 409(h)(2)(C) of the Federal Food, Drug, and Cosmetic
Act (21 U.S.C. 348 (h)(2)(C)) a food contact notification (FCN) is only effective for the manufacturer or supplier identified in the notification. Persons
who market a FCS based on an effective notification must be able to demonstrate that the notification is effective for their food contact substance.
All persons who purchase a food contact substance manufactured or supplied by a manufacturer or supplier identified in an effective notification may
rely on that notification to legally market or use the food contact substance for the use that is the subject of the notification, consistent with any limitations in that notification.
Additional information about Food Contact Substances and the Definitions of Food Types and Conditions of Use
are available on the FCS Program page.
Records shown on this page: This page is a partial listing of all records in the database. Additional pages/records are available for selection at the bottom of the page.
To obtain all the information on a Food Contact Substance, select the FCN number (FCN) in the first column of the database to reveal the additional information.
To view all records in the database select the All button at the bottom of the page. To search for a specific food ingredient, enter the term in the Filter box and select Show Items
to display only those records that contain the selected term. The Final Environmental Impact Decisions for Food Contact Notifications are also available.
Alkyl acrylate copolymers with styrene or alkyl methacrylate copolymers with styrene produced from long-chain (C16 - C22) linear alkyl acrylate or methyacrylate esters with up to 10 weight-percent of styrene in a matrix of neutral carrier oil (CAS Reg. Numbers include, but are not limited to, 851188-39-1 and 816417-47-7).
Evonik RohMax USA, Inc. and all international branches of Evonik RohMax
Fluorocarbon cured elastomer produced by copolymerizing tetrafluoroethylene (CAS Reg. No. 116-14-3) and propylene (CAS Reg. No. 115-07-01) and subsequent curing of the copolymer with triallylisocyanurate (CAS Reg. No. 1025-15-6) and 2,2'-bis(t-butylperoxy)diisopropylbenzene (CAS Reg. No 25155-25-3).
2-2'-[1,3-phenylenebis(methylene)]bis[2,3-dihydro-1H-isoindol-1-one] (CAS Reg. No. 935739-41-6) (also known as m-Xylylenediamine-bis(phthalamide), MXBP), used in conjunction with cobalt neodecanoate (CAS Reg. No. 27253-31-2).
Acrylic polymers are composed of a minimum of 60 weight percent of the polymer consisting of ethyl acrylate and methyacrylic acid. The balance of the polymer consists of one or more of the following monomers:
2-Sulfoethyl methacrylate (monomer) <2%; Macromonomers as follows:
Diallyldimethylammonium chloride polymer with acrylamide, reaction product with glyoxal, produced by copolymerizing from 20 to 90 weight percent of acrylamide and 10 to 80 weight percent of diallyldimethylammonium chloride, which is then cross-linked with not more than 30 weight percent of glyoxal.
Ethylene/propylene copolymers (CAS Reg. No. 9010-79-1) polymerized in the presence of propylene homopolymer (CAS Reg. No. 9003-07-0) complying with 21 CFR 177.1520(c) Item 1.1, to produce an inseparable blend of the two polymers.
Styrene/butadiene/acrylonitrile copolymers (CAS Reg. No. 9003-56-9, exclusive of minor co-monomers) containing up to 30% by weight of polymer units derived from acrylonitrile and up to 10% by weight of polymer units derived from one or more of the following monomers: acrylic acid, fumaric acid, 2-hydroxyethyl acrylate, itaconic acid, and methacrylic acid.
Nylon MXD-6 (CAS Reg. No. 25718-70-1) (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) meeting the analytical specifications in 21 CFR 177.1500(b) item 10.1 and used in conjunction with cobalt neodecanoate (CAS Reg. No. 27253-31-2).
Nylon MXD-6 (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) meeting the analytical specifications in 21 CFR 177.1500(b), item 10.2 and used in conjunction with cobalt stearate (CAS Reg. No. 13586-84-0).
Indorama Ventures USA Inc. and its stewarded affiliates around the world Mitsubishi Gas Chemical Company, Inc.
Styrene/butadiene copolymers (CAS Reg. No., exclusive of minor monomers, is 9003-55-8), produced by copolymerizing styrene and butadiene with one or more of the monomers methacrylic acid, 2-hydroxyethyl acrylate, itaconic acid, acrylic acid, fumaric acid, N-methylol methacrylamide, and methacrylamide, such that the total of methacrylic acid, 2-hydroxyethyl acrylate, itaconic acid, acrylic acid, and fumaric acid does not exceed 10 percent by weight, and the methacrylamide and N-methylol methacrylamide do not exceed 2 percent and 3 percent by weight, respectively.
Propylene/ethylene copolymers (CAS Reg. No. 9010-79-1) polymerized in the presence of propylene homopolymer (CAS Reg. No. 9003-07-0) complying with 21 CFR 177.1520(c) Item 1.1, to produce an inseparable blend of the two polymers.
The Dow Chemical Company Braskem S.A. and their U.S. subsidiary Braskem America, Inc.