| Device |
cushion, pad, denture, wax impregnated cotton, over the counter |
| Regulation Description |
OTC denture cushion or pad. |
| Definition |
OTC denture cushion or pad made of wax impregnated cotton cloth that the patient applies to the base or inner surface of a denture before inserting the denture into the mouth. The Device is intended to be discarded following 1 day's use. |
| Regulation Medical Specialty |
Dental |
| Review Panel |
Dental |
|---|
| Product Code | NKJ |
|---|
| Premarket Review |
Division of Dental and ENT Devices
(DHT1B)
Division of Dental and ENT Devices
(DHT1B)
|
| Submission Type |
510(K) Exempt
|
|---|
| Regulation Number |
872.3540
|
|---|
| Device Class |
1
|
| Total Product Life Cycle (TPLC) |
TPLC Product Code Report
|
| GMP Exempt? |
No
|
Summary Malfunction
Reporting |
Eligible |
| Note: FDA has exempted almost all class I devices (with the exception of reserved devices) from the premarket notification requirement, including those devices that were exempted by final regulation published in the Federal Registers of December 7, 1994, and January 16, 1996. It is important to confirm the exempt status and any limitations that apply with 21 CFR Parts 862-892. Limitations of device exemptions are covered under 21 CFR XXX.9, where XXX refers to Parts 862-892. |
| If a manufacturer's device falls into a generic category of exempted class I devices as defined in 21 CFR Parts 862-892, a premarket notification application and fda clearance is not required before marketing the device in the U.S. however, these manufacturers are required to register their establishment. Please see the Device Registration and Listing website for additional information. |
| Implanted Device? |
No
|
|---|
| Life-Sustain/Support Device? |
No
|
|---|
| Third Party Review |
Not Third Party Eligible |
