| Class 2 Device Recall ReNew II Endocut Scissor Tip, | |
Date Initiated by Firm | May 03, 2013 |
Date Posted | July 01, 2013 |
Recall Status1 |
Terminated 3 on July 11, 2013 |
Recall Number | Z-1629-2013 |
Recall Event ID |
65205 |
Product Classification |
Forceps, general & plastic surgery - Product Code GEN
|
Product | - Re-New II Endocut Scissor Tip, 16.51mm 5.0mm Ref. 3142 Lot 122295, 122308, 122455, 122875
Manual surgical instrument for general use. |
Code Information |
122295, 122308, 122455, 122875. |
Recalling Firm/ Manufacturer |
Surgical Instrument Service And Savings, Inc. 2747 Sw 6th St Redmond OR 97756-7109
|
For Additional Information Contact | Rich Wynkoop 866-866-7477 |
Manufacturer Reason for Recall | The seal which maintains a sterile barrier for reprocessed medical devices became compromised to the point where product may fall out of the pouch. |
FDA Determined Cause 2 | Packaging process control |
Action | MEDISISS sent a Correction Immediate Action Request letter dated May 2, 2013, to all affected customes. The letter identified the product, the problem, and the action to be taken by the customer. The letter directed the customer to inspect the products prior to use for seal integrity as specified on the product labeling: "Sterile unless package has been damaged or opened. Do not use if package is damaged."
This will be followed up by a visit from the customer's sales representatives who are tasked with inspecting all the lots that may be remaining in the customer's inventory. The sales representative is directed to complete a "Verification of Seal Inspection" form and return it to MEDISISS Customer Relations. Devices with unacceptable seals are to be returned to MEDISISS. The sales representative is responsible for obtaining a shipping label from customer service to enable the devices to be returned to the recalling firm via Fed Ex.
Customers with questions were instructed to call 866-866-7477. |
Quantity in Commerce | 10 |
Distribution | Nationwide Distribution. |
Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|
|
|
|