Class 1 Device Recall Baxter SIGMA Spectrum Infusion Pump V6

• Date Initiated by Firm: June 20, 2025
• Date Posted: July 17, 2025
• Recall Status: Open, Classified
• Recall Number: Z-2095-2025
• Recall Event ID: 97072
• 510(K)Number: K133801
• Product Classification: Infusion safety management software - Product Code PHC
• Product: Baxter SIGMA Spectrum Infusion Pump V6, Model Number 35700BAX
• Code Information: UDI-DI: 00085412091570; Serial Numbers: 765100 , 772744 , 789742 , 841197 , 867753 , 920606 , 1024015 770164 788724 , 793079 , 842498 , 918342 , 962810 , 1027523
• Recalling Firm/ Manufacturer: Baxter Healthcare Corporation; 1 Baxter Pkwy; Deerfield IL 60015-4625
• For Additional Information Contact: Center for One Baxter; 800-422-9837
• Manufacturer Reason for Recall: Certain Spectrum infusion pumps may have an incorrect version of software.
• FDA Determined Cause: Employee error
• Action: An URGENT MEDICAL DEVICE RECALL notification letter dated 6/20/25 was sent to customers. Actions to be Taken by Customers 1. Immediately locate Spectrum pumps with the affected serial numbers and remove them from service. The product code and serial number can be found on the bottom of the infusion pump. 2. Check and record the software version installed on the pump. The software on a V6 pump should begin with the number 6 and the software on a V8 pump should begin with the number 8. The software version is located on the startup screen upon powering up the pump as pictured on the next page. Additionally, the software version is indicated in the pump menu which can be accessed by following the steps. For V6: From the Pump Information screen, press the sw info soft key to display the software version screen. For V8: From the Select Care Area screen, press the options menu soft key. Select User Options and press OK. Select View Information and press OK. Select Pump Information and press OK to display the Pump Info screen. 3. Contact Baxter to confirm the software version on the affected pumps and to schedule service if required. Baxter Global Technical Services can be reached at 800-843-7867 (select option 1, then option 2), Monday through Friday, between 7:00 am and 7:00 pm Eastern Time. 4. If you received this communication directly from Baxter, acknowledge receipt of this notification by following the instructions on the enclosed reply instruction sheet, even if you have no remaining inventory. Acknowledging receipt will prevent you from receiving repeat notices. If you do not complete the acknowledgement, you will receive a phone call from OnProcess Technology on behalf of Baxter to confirm your receipt of this notification. 5. If you purchased this product from a distributor or wholesaler, please note that responding on the Baxter customer portal is not applicable. If a response is requested by your distributor or wholesaler, please respond to them
• Quantity in Commerce: 14 units
• Distribution: US States: CA, FL, IL, KS, MI, MS, NY, OH, OK, and VA.
• Total Product Life Cycle: TPLC Device Report

¹ A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
² Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
³ The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.

• 510(K) Database: 510(K)s with Product Code = PHC