| Class 2 Device Recall Clearlink/ContinuFlo/DuoVent |  |
Date Initiated by Firm | December 20, 2024 |
Date Posted | January 22, 2025 |
Recall Status1 |
Open3, Classified |
Recall Number | Z-1011-2025 |
Recall Event ID |
95929 |
510(K)Number | K203609 |
Product Classification |
Set, administration, intravascular - Product Code FPA
|
Product | Baxter Continu-Flo Solution Set with Duo-Vent Spike, REF UC8519 |
Code Information |
UDI/DI 00085412486512, Lot Numbers: DR24B21017 (exp. 02/28/2026) |
Recalling Firm/ Manufacturer |
Baxter Healthcare Corporation 1 Baxter Pkwy Deerfield IL 60015-4625
|
For Additional Information Contact | Center for One Baxter 800-422-9837 |
Manufacturer Reason for Recall | Specific lots of Solution Sets with Duo-Vent Spike have the potential for inverted side clamps causing the tubing to be unusable. |
FDA Determined Cause 2 | Under Investigation by firm |
Action | Baxter issued an URGENT MEDICAL DEVICE RECALL notice to its consignees on 12/20/2024. The notice explained the problem with the device, hazard involved and requested the following:
1. Immediately locate, isolate, and cease all use of the affected lot number of the product. The product code and lot number can be found on the individual product and shipping carton.
2. Contact Baxter Healthcare Center for Service at 888-229-0001 between the hours of 7:00 am and 6:00 pm Central Time, Monday through Friday to arrange for return and credit. Please have your Baxter 8-digit ship-to account number, product code, lot number, and quantity of product to be returned ready when calling.
3. If you received this communication directly from Baxter, please acknowledge receipt of this notification by responding on our customer portal at https://BaxterFieldActionCustomerPortal.onprocess.com even if you do not have any remaining inventory. Log in to the portal using the account number listed in the enclosed reply form instruction sheet.
4. If you purchased this product from a distributor or wholesaler, please contact your supplier to arrange for return of the affected product. Please note that responding on the Baxter customer portal is not applicable. If a response is requested by your distributor or wholesaler, please respond to the supplier according to their instructions.
5. Please forward a copy of this communication to the Medical Director/Office Manager, Director of Pharmacy, Medication Safety Officer, Purchasing Director/Head of central supply and any other departments within your institution who use the affected product.
6. If you are a dealer, wholesaler, distributor/reseller, or original equipment manufacturer (OEM) that distributed any affected product to other facilities, please conduct a consumer-level recall of the affected product that you distributed to customers and check the associated box on the customer portal.
For general questions regarding this co |
Distribution | US Nationwide distribution in the states of MN, MO, VA, TX, CA, MA, FL, SC. |
Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.
|
510(K) Database | 510(K)s with Product Code = FPA
|
|
|
|