Quick Links: Skip to main page content Skip to Search Skip to Topics Menu Skip to Common Links
  • Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

Class 2 Device Recall Philips Heatlhcare

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 


New Search Back to Search Results
  Class 2 Device Recall Philips Heatlhcare see related information
Date Initiated by Firm January 23, 2015
Date Posted March 06, 2015
Recall Status1 Terminated 3 on June 07, 2016
Recall Number Z-1251-2015
Recall Event ID 70432
510(K)Number K141381  
Product Classification System, x-ray, stationary - Product Code KPR
Product Philips DuraDiagnost X-Ray system, Stationary X-Ray System Radiographic
Models: 712210, 712211
Code Information Serial Numbers: SN120001 SN120002 SN120003 SN130001 SN130002 SN130004 SN130005 SN130015 SN130019 SN130021 SN130003 SN130006 SN130007 SN130009 SN130010 SN130011 SN130012 SN130013 SN130014 SN130016 SN130017 SN130018 SN130020 SN130022 SN130023 SN140001 SN130001 SN130002 SN140001 SN140004 SN140005 SN140008 SN140009 SN140010 SN140012 SN140013 SN140019 SN140020 SN140021 SN140022 SN140024 SN140027 SN140033 SN140034 SN140036 SN140053 SN140062 SN130003 SN140002 SN140003 SN140006 SN140007 SN140016 SN140017 SN140018 SN140031 SN140035 SN140037 SN140039 SN140040 SN140041 SN140044 SN140045 SN140046 SN140048 SN140050 SN140051 SN140052 SN140056 SN140058 SN140060 
Recalling Firm/
Manufacturer		 Philips Medical Systems, Inc.
3000 Minuteman Rd
Andover MA 01810-1032
For Additional Information Contact
978-687-1501
Manufacturer Reason
for Recall		 Improper installation of Tube arm, and Wall stand may cause it to fall down, Improper installation of table may cause it to float.
FDA Determined
Cause 2		 Process control
Action Philips Healthcare issued notice to foreign Distributors on 1/23/15 to issue and advise customers to stop using the device until a Philips Engineer checks the device. After the engineer verifies that the tube arm, Wall stand and table were properly assembled, the device may be used again. Philips will subsequently install a new Tube Arm and Wall stand fixing structure that is designed to prevent this hazard if the tube arm or Wall stand is incorrectly reinstalled in the future. Philips will subsequently provide the method to adjust the T-nuts of table to make sure it was properly assembled. A Philips Service Engineer will contact affected customers to install the solution.
Quantity in Commerce 71 units
Distribution Worldwide Distribution. Argentina, Australia, Burkina-Faso, Chile, China, Colombia, Ecuador, France, Germany, Hungary, Indonesia, Iraq (NL), Kuwait, Libya, Macedonia, Malaysia, Mayotte, Poland, Saudi Arabia, Slovenia, Spain, Switzerland, Turkey, United Kingdom, and Uzbekistan.
Total Product Life Cycle TPLC Device Report
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
510(K) Database 510(K)s with Product Code = KPR and Original Applicant = PHILIPS HEALTHCARE (SUZHOU) CO., LTD.
-
-