• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

Class 2 Device Recall Leckey MyWay Walker

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 


New Search Back to Search Results
 Class 2 Device Recall Leckey MyWay Walkersee related information
Date Initiated by FirmMarch 01, 2021
Create DateMay 27, 2021
Recall Status1 Open3, Classified
Recall NumberZ-1687-2021
Recall Event ID 87804
Product Classification Walker, mechanical - Product Code ITJ
ProductMyWay Walker Chassis - Product Usage: is intended for use by children already using a supportive walking device.
Code Information Catalog Codes/Item Number: S1 - 173-1600/PMWS1x; S2 - 173-2600/PMWS2x ; S3 - 173-3600/PMWS3x;  Serial Number Range: 220568 to 272111 manufactured between 08/01/2018 to 11/26/2020  
Recalling Firm/
Manufacturer
James Leckey Design Ltd
19C Ballinderry Road
Lisburn United Kingdom
Manufacturer Reason
for Recall
Due to a failure of the welds, the casters detached from the rear legs of the walker.
FDA Determined
Cause 2
Device Design
ActionOn 03/29/2021, the Recalling Firm and its U.S. Distributor sent an "URGENT: MEDICAL DEVICE RECALL" Notification Letter via mail informing customers that: 1. The rear legs of the walker each have a boss into which castors are screwed. The Recalling Firm has had reports of these bosses coming loose and castors detaching from the rear legs. 2. The rear leg assembly consists of an aluminum tube with bosses welded at either end. Our investigations have identified a common cause of the field issues as a failure of the weld between the tube and the bottom boss. 3. The weld is fabricated by welding through a hole in the tube to create the bond and the weld is then continued to completely fill the hole. The boss is welded at either side of the tube, and the welds are then smoothed off on the outside of the tube prior to painting, obscuring the weld on the finished product. The failure is due to variations in the manual weld process, primarily due to variability in the weld parameters used. This led to the solid aluminum boss not being heated sufficiently in the weld process, thereby creating a weak bond. Process controls did not prevent the process failure or detect that there was an issue prior to dispatch. 4. On evaluation of the failure, it is seen if the weld breaks, initially the castor boss will be retained in the tube by the roughened weld surface between the tube and boss. However over, the boss will potentially work its way loose, or through repeated use the roughening will be worn away and allow the castor boss to come loose. Use of this product may result in the unexpected detachment of the caster which could result in a fall and potential injury due to a fall. Customers are instructed to: -Immediately examine their inventory and quarantine product subject to the recall. -If they further distributed the affected products, notify them of the product recall by forwarding/including a copy of this recall notification. -Complete and return the Acknowle
Quantity in Commerce2,719 walkers
DistributionWorldwide distribution - U.S. Nationwide distribution in the states of CA and WI and the countries of Italy, Norway, Australia, Czechia, Netherlands, Denmark, New Zealand, Japan, United Arab Emirates, Qatar, Croatia, Spain, Poland, Russia, South Africa, Taiwan, Saudi Arabia, Chemitec, Centre Harika, Hong Kong, Lebanon, Belgium, Philippines, Singapore, Malaysia, Indonesia, Slovakia, China, and France.
Total Product Life CycleTPLC Device Report

1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.
-
-