|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
12/18/2023 |
Anesthesiology |
1-162 |
Complete |
ISO |
10651-4 Second edition 2023-03 |
Lung ventilators - Part 4: Particular requirements for user-powered resuscitators |
12/18/2023 |
Anesthesiology |
1-163 |
Complete |
ISO |
80601-2-72 Second edition 2023-06 |
Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
12/18/2023 |
Anesthesiology |
1-164 |
Complete |
ISO |
5361 Fourth edition 2023-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
12/18/2023 |
Anesthesiology |
1-165 |
Complete |
ISO |
80601-2-13 Second edition 2022-04 |
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
12/18/2023 |
Anesthesiology |
1-166 |
Complete |
ISO |
11195 Second edition 2018-01 |
Gas mixers for medical use - Stand-alone gas mixers |
12/18/2023 |
Biocompatibility |
2-302 |
Complete |
ASTM |
F981-23 |
Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices |
12/18/2023 |
Biocompatibility |
2-303 |
Partial |
ISO |
10993-17 Second edition 2023-09 |
Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents |
12/18/2023 |
Cardiovascular |
3-105 |
Partial |
IEC |
60601-2-25 Edition 2.0 2011-10 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
ANSI AAMI IEC |
60601-2-25:2011/(R)2016 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
12/18/2023 |
Cardiovascular |
3-126 |
Partial |
IEC |
60601-2-27 Edition 3.0 2011-03 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment [Including: Corrigendum 1 (2012)] |
ANSI AAMI IEC |
60601-2-27:2011(R)2016 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
12/18/2023 |
Cardiovascular |
3-189 |
Complete |
ASTM |
F2942-19 |
Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents |
12/18/2023 |
Cardiovascular |
3-190 |
Complete |
ISO |
PAS 7020 First edition 2023-05 |
Sizing parameters of surgical valve prostheses: Requirements regarding the application of ISO 5840-2 |
12/18/2023 |
Dental/ ENT |
4-309 |
Complete |
ISO |
6877 Third edition 2021-09 |
Dentistry - Endodontic obturating materials |
ANSI ADA |
Standard No. 78-2021 |
Dentistry - Endodontic Obturating Materials |
12/18/2023 |
Dental/ ENT |
4-310 |
Complete |
ISO |
22112 Second edition 2017-08 |
Dentistry - Artificial teeth for dental prostheses |
ANSI ADA |
Standard No. 15-2021 |
Artificial Teeth for Dental Prostheses |
12/18/2023 |
Dental/ ENT |
4-311 |
Complete |
ISO |
9917-2 Third edition 2017-09 |
Dentistry - Water-based cements - Part 2: Resin-modified cements |
12/18/2023 |
Dental/ ENT |
4-312 |
Complete |
ANSI ASA |
S3.35-2021 |
American National Standard Method for Measurement of Performance Characteristics of Hearing Aids Under Simulated Real-Ear Working Conditions |
12/18/2023 |
Dental/ ENT |
4-313 |
Complete |
ISO |
27020 Second edition 2019-06 |
Dentistry - Brackets and tubes for use in orthodontics |
ANSI ADA |
Standard No.100-2020 |
Orthodontic Brackets and Tubes |
12/18/2023 |
Dental/ ENT |
4-314 |
Complete |
ISO |
7494-2 Third edition 2022-07 |
Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems |
12/18/2023 |
Dental/ ENT |
4-315 |
Complete |
ISO |
24234 Third edition 2021-08 |
Dentistry - Dental Amalgam |
12/18/2023 |
Dental/ ENT |
4-316 |
Complete |
ISO |
20127 Second edition 2020-08 |
Dentistry - Physical properties of powered toothbrushes |
ANSI ADA |
Standard No.120-2022 |
Dentistry - Physical Properties of Powered Toothbrushes |
12/18/2023 |
Dental/ ENT |
4-317 |
Complete |
ISO |
8325 Third edition 2023-03 |
Dentistry - Test methods for rotary instruments |
12/18/2023 |
Dental/ ENT |
4-318 |
Complete |
ISO |
20749 Second edition 2023-06 |
Dentistry - Pre-capsulated dental amalgam |
12/18/2023 |
Dental/ ENT |
4-319 |
Partial |
ISO |
17730 Second edition 2020-09 |
Dentistry - Fluoride varnishes |
ANSI ADA |
Standard No. 117-2022 |
Dentistry - Fluoride Varnishes |
12/18/2023 |
Dental/ ENT |
4-320 |
Complete |
ISO |
13402 First edition 1995-08-01 |
Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure |
12/18/2023 |
Dental/ ENT |
4-321 |
Complete |
ISO |
23450 First edition 2021-03 |
Dentistry - Intraoral camera |
12/18/2023 |
Dental/ ENT |
4-322 |
Complete |
ISO |
18675 First edition 2022-05 |
Dentistry - Machinable ceramic blanks |
12/18/2023 |
Dental/ ENT |
4-323 |
Complete |
ISO |
5139 First edition 2023-05 |
Dentistry - Polymer-based composite machinable blanks |
12/18/2023 |
Dental/ ENT |
4-324 |
Complete |
ISO |
TS 16506 First edition 2018-03 |
Dentistry - Polymer-based luting materials containing adhesive components |
12/18/2023 |
General Plastic Surgery/ General Hospital |
6-497 |
Partial |
ASTM |
D7866-23 |
Standard Specification for Radiation Attenuating Protective Gloves |
12/18/2023 |
InVitro Diagnostics |
7-318 |
Complete |
CLSI |
EP25 2nd Edition |
Evaluation of Stability of In Vitro Medical Laboratory Test Reagents |
12/18/2023 |
InVitro Diagnostics |
7-319 |
Complete |
CLSI |
M23 6th Edition |
Development of In Vitro Susceptibility Test Methods, Breakpoints, and Quality Control Parameters |
12/18/2023 |
InVitro Diagnostics |
7-320 |
Partial |
CLSI |
H62 1st Edition |
Validation of Assays Performed by Flow Cytometry |
12/18/2023 |
Materials |
8-605 |
Complete |
ASTM |
F1609-23 |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
12/18/2023 |
Materials |
8-606 |
Complete |
ASTM |
F2537-23 |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
12/18/2023 |
Materials |
8-607 |
Complete |
ASTM |
F2082/F2082M-23 |
Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
12/18/2023 |
Materials |
8-609 |
Complete |
ASTM |
F2026-23 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
12/18/2023 |
Materials |
8-610 |
Complete |
ASTM |
F601-23 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
12/18/2023 |
Nanotechnology |
18-24 |
Partial |
ASTM |
E2524-22 |
Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles |
12/18/2023 |
ObGyn/ Gastroenterology/ Urology |
9-150 |
Complete |
ISO |
7439 Fourth edition 2023-04 |
Copper-bearing contraceptive intrauterine devices - Requirements and tests |
12/18/2023 |
Orthopedic |
11-402 |
Complete |
ASTM |
F1798-21 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
12/18/2023 |
Orthopedic |
11-403 |
Complete |
ASTM |
F3047M-23 |
Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-Hard Articulations |
12/18/2023 |
Orthopedic |
11-404 |
Complete |
ASTM |
F2887-23 |
Standard Specification for Total Elbow Prostheses |
12/18/2023 |
Orthopedic |
11-405 |
Complete |
ASTM |
F1829-23 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
12/18/2023 |
Orthopedic |
11-406 |
Complete |
ASTM |
F3141-23 |
Standard Guide for Total Knee Replacement Loading Profiles |
12/18/2023 |
Orthopedic |
11-407 |
Complete |
ASTM |
F3140-23 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
12/18/2023 |
Orthopedic |
11-408 |
Complete |
ASTM |
F2777-23 |
Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
12/18/2023 |
Orthopedic |
11-409 |
Complete |
ASTM |
F3495-23 |
Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components |
12/18/2023 |
Radiology |
12-348 |
Partial |
IEC |
60601-2-54 Edition 2.0 2022-09 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
12/18/2023 |
Radiology |
12-352 |
Complete |
NEMA |
PS 3.1 - 3.20 2023e |
Digital Imaging and Communications in Medicine (DICOM) Set |
12/18/2023 |
Radiology |
12-353 |
Partial |
ANSI |
Z136.1-2022 |
American National Standard for Safe Use of Lasers |
12/18/2023 |
Sterility |
14-589 |
Complete |
ISO |
14644-4 Second edition 2022-11 |
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up |
12/18/2023 |
Sterility |
14-590 |
Complete |
ISO |
14644-8 Third edition 2022-06 |
Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) |
12/18/2023 |
Sterility |
14-591 |
Complete |
ISO |
14644-10 Second edition 2022-05 |
Cleanrooms and associated controlled environments - Part 10: Assessment of surface cleanliness for chemical contamination |
12/18/2023 |
Sterility |
14-592 |
Complete |
ISO |
13408-1 Third edition 2023-08 |
Aseptic processing of health care products - Part 1: General requirements |
12/18/2023 |
Sterility |
14-593 |
Complete |
ASTM |
F3039-23 |
Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration |
12/18/2023 |
Sterility |
14-594 |
Complete |
ISO |
11607-1 Second edition 2019-02 [Including AMD1:2023] |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems [Including Amendment 1 (2023)] |
12/18/2023 |
Sterility |
14-595 |
Complete |
ISO |
11607-2 Second edition 2019-02 [Including AMD1:2023] |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes [Including Amendment 1 (2023)]. |
12/18/2023 |
Sterility |
14-596 |
Complete |
ASTM |
F88/F88M-23 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
12/18/2023 |
Sterility |
14-597 |
Complete |
AAMI ANSI |
ST108:2023 |
Water Quality for Processing Medical Devices |
10/09/2023 |
Software/ Informatics |
13-129 |
Complete |
ISO IEC IEEE |
29119-1 Second edition 2022-01 |
Software and systems engineering - Software testing - Part 1: General concepts |
10/09/2023 |
Software/ Informatics |
13-130 |
Complete |
ANSI AAMI |
2700-2-1:2022 |
Medical devices and medical systems - Essential safety and performance requirements for equipment comprising the patient-centric integrated clinical environment (ICE): Part 2-1: Particular requirements for forensic data logging |
10/09/2023 |
Software/ Informatics |
13-131 |
Complete |
ANSI AAMI |
SW96:2023 |
Standard for medical device security - Security risk management for device manufacturers |
09/11/2023 |
Orthopedic |
11-400 |
Complete |
ISO |
21536 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants |
09/11/2023 |
Orthopedic |
11-401 |
Complete |
ISO |
21535 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants |
05/29/2023 |
Anesthesiology |
1-161 |
Complete |
ISO |
16628 Second edition 2022-06 |
Anaesthetic and respiratory equipment - Tracheobronchial tubes |
05/29/2023 |
Biocompatibility |
2-299 |
Complete |
ASTM |
F1904-23 |
Standard Guide for Testing the Biological Responses to Medical Device Particulate Debris and Degradation Products in vivo |
05/29/2023 |
Biocompatibility |
2-300 |
Complete |
ISO |
10993-2 Third edition 2022-11 |
Biological Evaluation of medical devices - Part 2: Animal welfare requirements |
05/29/2023 |
Biocompatibility |
2-301 |
Complete |
ASTM |
F1983-23 |
Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications |
05/29/2023 |
Cardiovascular |
3-184 |
Complete |
ASTM |
F2477-23 |
Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents and Endovascular Prostheses |
05/29/2023 |
Cardiovascular |
3-185 |
Partial |
ANSI AAMI |
PC76:2021 |
Active implantable medical devices - Requirements and test protocols for safety of patients with pacemakers and ICDs exposed to magnetic resonance imaging |
05/29/2023 |
Cardiovascular |
3-186 |
Complete |
ISO |
14708-2 Third edition 2019-09 |
Implants for surgery - Active implantable medical devices - Part 2: Cardiac pacemakers |
05/29/2023 |
Cardiovascular |
3-187 |
Complete |
ISO |
14708-6 Second edition 2019-09 |
Implants for surgery - Active implantable medical devices - Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) |
05/29/2023 |
Cardiovascular |
3-188 |
Partial |
ISO |
81060-3 First edition 2022-12 |
Non-invasive sphygmomanometers - Part 3: Clinical investigation of continuous automated measurement type |
05/29/2023 |
Dental/ ENT |
4-298 |
Complete |
ISO |
4049 Fifth edition 2019-05 |
Dentistry - Polymer-based restorative materials |
ANSI ADA |
Standard No. 27-2022 |
Polymer-based Restorative Materials |
05/29/2023 |
Dental/ ENT |
4-299 |
Complete |
ISO |
3107 Fifth edition 2022-09 |
Dentistry - Zinc oxide-eugenol cements and non-eugenol zinc oxide cements |
ANSI ADA |
Standard No. 30-2023 |
Dental - Zinc Oxide-eugenol Cements and Non-eugenol Zinc Oxide Cements |
05/29/2023 |
Dental/ ENT |
4-300 |
Complete |
ISO |
22674 Third edition 2022-08 |
Dentistry - Metallic materials for fixed and removable restorations and appliances |
05/29/2023 |
Dental/ ENT |
4-301 |
Complete |
ISO |
21563 Second edition 2021-08 |
Dentistry - Hydrocolloid impression materials |
ANSI ADA |
Standard No. 128-2022 |
Hydrocolloid Impression Materials |
05/29/2023 |
Dental/ ENT |
4-302 |
Complete |
ISO |
10477 Fourth edition 2020-10 |
Dentistry - Polymer-based crown and veneering materials |
ANSI ADA |
Standard No. 53-2022 |
Polymer-Based Crown and Veneering Materials |
05/29/2023 |
Dental/ ENT |
4-303 |
Complete |
ISO |
9333 Third edition 2022-08 |
Dentistry - Brazing materials |
05/29/2023 |
Dental/ ENT |
4-304 |
Complete |
ISO |
21606 Second edition 2022-08 |
Dentistry - Elastomeric auxiliaries for use in orthodontics |
05/29/2023 |
Dental/ ENT |
4-305 |
Partial |
ISO |
10637 Second edition 2018-05 |
Dentistry - Central suction source equipment |
ANSI ADA |
Standard No. 177-2020 |
Central Suction Source Equipment |
05/29/2023 |
Dental/ ENT |
4-306 |
Partial |
ISO |
22052 First edition 2020-06 |
Dentistry - Compressed air source equipment |
ANSI ADA |
Standard No. 94-2021 |
Central Compressed Air Source Equipment |
05/29/2023 |
Dental/ ENT |
4-307 |
Complete |
ISO |
13504 First edition 2012-07 |
Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment |
05/29/2023 |
Dental/ ENT |
4-308 |
Complete |
ISO |
14708-7 Second edition 2019-12 |
Implants for surgery - Active implantable medical devices - Part 7: Particular requirements for cochlear and auditory brainstem implant systems |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-486 |
Complete |
ISO |
10535 Third edition 2021-10 |
Assistive products - Hoists for the transfer of disabled persons - Requirements and test methods |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-487 |
Partial |
ANSI AAMI |
PB70:2022 |
Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-488 |
Complete |
ASTM |
F1671/F1671M-22 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-489 |
Complete |
IEC |
60601-2-52 Edition 1.1 2015-03 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
|
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-490 |
Complete |
ISO |
10555-6 First edition 2015-04-15 [Including AMD1:2019] |
Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports [Including AMENDMENT 1 (2019)] |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-491 |
Complete |
ASTM |
F1670/F1670M-17a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-492 |
Complete |
ASTM |
F2100-23 |
Standard Specification for Performance of Materials Used in Medical Face Masks |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-493 |
Complete |
ASTM |
F2101-23 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-494 |
Complete |
ASTM |
F3352/F3352M-23a |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-495 |
Complete |
ISO |
20698 First Edition 2018-07 |
Catheter systems for neuraxial application - Sterile and single-use catheters and accessories |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-496 |
Partial |
ASTM |
F739-20 |
Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact |
05/29/2023 |
InVitro Diagnostics |
7-315 |
Complete |
CLSI |
EP12 3rd Edition |
Evaluation of Qualitative, Binary Output Examination Performance |
05/29/2023 |
InVitro Diagnostics |
7-316 |
Complete |
CLSI |
NBS01 7th Edition |
Dried Blood Spot Specimen Collection for Newborn Screening |
05/29/2023 |
InVitro Diagnostics |
7-317 |
Partial |
CLSI |
M100, 33rd Edition |
Performance Standards for Antimicrobial Susceptibility Testing |
05/29/2023 |
Materials |
8-597 |
Complete |
ASTM |
F2003-02(2022) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
05/29/2023 |
Materials |
8-598 |
Complete |
ASTM |
F3109-22 |
Standard Test Method for Verification of Multi-Axis Force Measuring Platforms |
05/29/2023 |
Materials |
8-599 |
Complete |
ASTM |
F1295-22 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
05/29/2023 |
Materials |
8-600 |
Complete |
ASTM |
F1978-22 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
05/29/2023 |
Materials |
8-601 |
Complete |
ASTM |
F2516-22 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
05/29/2023 |
Materials |
8-602 |
Complete |
ASTM |
F2503-23 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
05/29/2023 |
Materials |
8-603 |
Complete |
ASTM |
F1472-23 |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
05/29/2023 |
Materials |
8-604 |
Complete |
ASTM |
F2257-22 |
Standard Specification for Wrought Seamless or Welded and Drawn 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
05/29/2023 |
Nanotechnology |
18-23 |
Complete |
ASTM |
E3025-22 |
Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-143 |
Partial |
ISO |
20696 First edition 2018-06; Corrected 2019-12 |
Sterile urethral catheters for single use |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-145 |
Complete |
ASTM |
D7661-18 |
Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-146 |
Complete |
ISO |
8600-4 Third Edition 2023-01 |
Endoscopes - Medical endoscopes and certain accessories - Part 4: Determination of maximum width of insertion portion |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-147 |
Complete |
ISO CIE |
11664-2 First edition 2022-08 |
Colorimetry - Part 2: CIE standard illuminants |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-148 |
Complete |
ISO CIE |
11664-6 Second edition 2022-08 |
Colorimetry - Part 6: CIEDE2000 colour-difference formula |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-149 |
Complete |
IEC |
60601-2-39 Edition 3.0 2018-04 |
Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
|
05/29/2023 |
Orthopedic |
11-399 |
Complete |
ASTM |
F1357-23 |
Standard Specification for Articulating Total Wrist Implants |
05/29/2023 |
Physical Medicine |
16-234 |
Complete |
ISO |
7176-14 Third Edition 2022 |
Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
05/29/2023 |
Physical Medicine |
16-235 |
Complete |
ISO |
7176-25 Second Edition 2022 |
Wheelchairs - Part 25: Lead-acid batteries and chargers for powered wheelchairs - Requirements and test methods |
05/29/2023 |
Physical Medicine |
16-236 |
Complete |
ISO |
7176-19 Third Edition 2022 |
Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles |
05/29/2023 |
Radiology |
12-347 |
Complete |
IEC |
60601-2-33 Edition 4.0 2022-08 |
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis |
05/29/2023 |
Radiology |
12-350 |
Complete |
IEC |
60806 Edition 2.0 2022-11 |
Determination of the maximum symmetrical radiation field of X-ray tube assemblies and X-ray source assemblies for medical diagnosis |
05/29/2023 |
Radiology |
12-351 |
Complete |
IEC |
60601-2-43 Edition 3.0 2022-12 |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
05/29/2023 |
Sterility |
14-584 |
Complete |
ASTM |
F2391-22 |
Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
05/29/2023 |
Sterility |
14-585 |
Complete |
AAMI ISO |
TIR16775:2023 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
ISO |
TS 16775 Second edition 2021-11 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
05/29/2023 |
Sterility |
14-586 |
Complete |
ISO |
22441 First edition 2022-08 |
Sterilization of health care products - Low temperature vaporized hydrogen peroxide - Requirements for the development, validation and routine control of a sterilization process for medical devices |
05/29/2023 |
Sterility |
14-587 |
Complete |
AAMI |
TIR104:2022 |
Guidance on transferring health care products between radiation sterilization sources |
05/29/2023 |
Sterility |
14-588 |
Complete |
AAMI |
TIR17:2017/(R)2020 |
Compatibility of materials subjected to sterilization |
04/03/2023 |
General II (ES/ EMC) |
19-34 |
Complete |
IEC |
61010-1 Edition 3.1 2017-01 CONSOLIDATED VERSION |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements [Including: Corrigendum 1 (2019)]
- Note: This standard is recognized with relevant US national differences applied, see reference #1 in Relevant FDA Guidance and/or Supportive Publication section |
04/03/2023 |
General II (ES/ EMC) |
19-49 |
Complete |
IEC |
60601-1 Edition 3.2 2020-08 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
- Note: This standard is recognized with relevant US national differences applied, see references #1 and #2 in the Relevant FDA Guidance and/or Supportive Publication section below. |
02/20/2023 |
Sterility |
14-575 |
Complete |
ASTM |
F1980-21 |
Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
12/19/2022 |
Anesthesiology |
1-153 |
Complete |
NFPA |
99:2021 |
Health Care Facilities Code |
12/19/2022 |
Anesthesiology |
1-154 |
Complete |
ASME |
PVHO-1-2019 |
Safety Standard for Pressure Vessels for Human Occupancy |
12/19/2022 |
Anesthesiology |
1-155 |
Complete |
ISO |
10079-2 Fourth edition 2022-03 |
Medical suction equipment - Part 2: Manually powered suction equipment |
12/19/2022 |
Anesthesiology |
1-156 |
Complete |
ISO |
10079-3 Fourth edition 2022-03 |
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
12/19/2022 |
Anesthesiology |
1-157 |
Complete |
ISO |
10079-1 Fourth edition 2022-03 |
Medical suction equipment - Part 1: Electrically powered suction equipment |
12/19/2022 |
Anesthesiology |
1-158 |
Complete |
ISO |
10079-4 First edition 2021-08 |
Medical suction equipment - Part 4: General requirements |
12/19/2022 |
Anesthesiology |
1-159 |
Complete |
ISO |
18778 Second edition 2022-06 |
Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors |
12/19/2022 |
Anesthesiology |
1-160 |
Complete |
ISO |
80601-2-84 First edition 2020-07 |
Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment |
12/19/2022 |
Biocompatibility |
2-289 |
Complete |
ISO |
10993-12 Fifth edition 2021-01 |
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials |
12/19/2022 |
Biocompatibility |
2-296 |
Partial |
ISO |
10993-10 Fourth edition 2021-11 |
Biological evaluation of medical devices - Part 10: Tests for skin sensitization |
12/19/2022 |
Biocompatibility |
2-297 |
Complete |
ASTM |
F763-22 |
Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials |
12/19/2022 |
Biocompatibility |
2-298 |
Partial |
ISO |
10993-18 Second edition 2020-01 Amendment 1 2022-05 |
Biological evaluation of medical devices - Part 18: Chemical characterization of medical device materials within a risk management process [Including Amendment 1 (2022)]. |
12/19/2022 |
Cardiovascular |
3-183 |
Complete |
ISO |
11658 First edition 2012-05-15 |
Cardiovascular implants and extracorporeal systems - Blood/tissue contact surface modifications for extracorporeal perfusion systems |
ANSI AAMI ISO |
11658: 2012 |
Cardiovascular implants and extracorporeal systems - Blood/tissue contact surface modifications for extracorporeal perfusion systems |
12/19/2022 |
Dental/ ENT |
4-294 |
Complete |
ANSI ADA |
Standard No. 139-2020 |
Dental Base Polymers |
12/19/2022 |
Dental/ ENT |
4-295 |
Complete |
ANSI ADA |
Standard No. 41-2020 |
Evaluation of Biocompatibility of Medical Devices Used in Dentistry |
12/19/2022 |
Dental/ ENT |
4-296 |
Complete |
ISO |
9873 Fourth edition 2019-03 |
Dentistry - Intra-oral mirrors |
ANSI ADA |
Standard No. 191-2020 |
Intra-Oral Mirrors |
12/19/2022 |
Dental/ ENT |
4-297 |
Complete |
ISO |
20126 Third edition 2022-03 |
Dentistry - Manual toothbrushes - General requirements and test methods |
12/19/2022 |
General I (QS/ RM) |
5-135 |
Complete |
ISO |
20417 First edition 2021-04 Corrected version 2021-12 |
Medical devices - Information to be supplied by the manufacturer |
12/19/2022 |
General I (QS/ RM) |
5-136 |
Complete |
ASTM |
D4332-22 |
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
12/19/2022 |
General I (QS/ RM) |
5-137 |
Complete |
IEC |
TR 60878 Ed. 4.0 2022-11 |
Graphical symbols for electrical equipment in medical practice |
12/19/2022 |
General I (QS/ RM) |
5-138 |
Complete |
AAMI |
TIR66: 2017/(R)2020 |
Guidance for the creation of physiologic data and waveform databases to demonstrate reasonable assurance of the safety and effectiveness of alarm system algorithms |
12/19/2022 |
General I (QS/ RM) |
5-139 |
Complete |
ISO |
18250-3 First edition 2018-06 |
Medical devices - Connectors for reservoir delivery systems for healthcare applications - Part 3: Enteral application |
12/19/2022 |
General I (QS/ RM) |
5-140 |
Complete |
ASME |
V&V 10-2019 |
Standard for Verification and Validation in Computational Solid Mechanics |
12/19/2022 |
General I (QS/ RM) |
5-141 |
Complete |
ASME |
V&V 20-2009 (R2021) |
Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer |
12/19/2022 |
General II (ES/ EMC) |
19-48 |
Complete |
IEEE ANSI |
USEMCSC C63.27-2021 |
American National Standard for Evaluation of Wireless Coexistence |
12/19/2022 |
General Plastic Surgery/ General Hospital |
6-483 |
Complete |
IEC |
60601-2-35 Edition 2.0 2020-09 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
12/19/2022 |
General Plastic Surgery/ General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
12/19/2022 |
General Plastic Surgery/ General Hospital |
6-485 |
Complete |
ISO |
7886-4 Second Edition 2018-11 |
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature |
12/19/2022 |
InVitro Diagnostics |
7-313 |
Complete |
CLSI |
EP27 2nd Edition |
Constructing and Interpreting an Error Grid for Quantitative Measurement Procedures |
12/19/2022 |
InVitro Diagnostics |
7-314 |
Partial |
CLSI |
M27M44S, 3rd Edition |
Performance Standards for Antifungal Susceptibility Testing of Yeasts |
12/19/2022 |
Materials |
8-594 |
Complete |
ISO |
5832-6 Third Edition 2022-03 |
Implants for surgery -- Metallic materials -- Part 6:Wrought cobalt-nickel-chromium-molybdenum alloy |
12/19/2022 |
Materials |
8-595 |
Complete |
ISO |
5832-5 Fourth Edition 2022-03 |
Implants for surgery -- Metallic materials -- Part 5: Wrought cobalt-chromium-tungsten-nickel |
12/19/2022 |
Materials |
8-596 |
Complete |
ASTM |
D412-16(2021) |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension |
12/19/2022 |
Nanotechnology |
18-21 |
Complete |
ISO |
TS 80004-6 Second edition 2021-03 |
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization |
12/19/2022 |
Nanotechnology |
18-22 |
Complete |
ISO |
17200 First edition 2020-09 |
Nanotechnology - Nanoparticles in powder form - Characteristics and measurements |
12/19/2022 |
ObGyn/ Gastroenterology/ Urology |
9-140 |
Partial |
ISO |
8637-2 First Edition 2018-07 |
Extracorporeal systems for blood purification - Part 2: Extracorporeal blood circuit for hemodialyzers, hemodiafilters and hemofilters |
ANSI AAMI ISO |
8637-2:2018 |
Extracorporeal systems for blood purification - Part 2: Extracorporeal blood circuit for hemodialyzers, hemodiafilters and hemofilters |
12/19/2022 |
ObGyn/ Gastroenterology/ Urology |
9-141 |
Complete |
ISO |
8637-3 First Edition 2018-07 |
Extracorporeal systems for blood purification - Part 3: Plasmafilters |
12/19/2022 |
ObGyn/ Gastroenterology/ Urology |
9-142 |
Complete |
ASTM |
D1894-14 |
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
12/19/2022 |
ObGyn/ Gastroenterology/ Urology |
9-144 |
Complete |
ISO |
20697 First edition 2018-06; Corrected 2018-09 |
Sterile drainage catheters and accessory devices for single use |
12/19/2022 |
Ophthalmic |
10-132 |
Partial |
ISO |
10942 Third edition 2022-01 |
Ophthalmic instruments - Direct ophthalmoscopes |
12/19/2022 |
Ophthalmic |
10-133 |
Complete |
ISO |
11979-10 Second edition 2018-03 |
Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes. |
12/19/2022 |
Orthopedic |
11-394 |
Complete |
ASTM |
F1820-22 |
Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices |
12/19/2022 |
Orthopedic |
11-395 |
Complete |
ASTM |
F1814-22 |
Standard Guide for Evaluating Modular Hip and Knee Joint Components |
12/19/2022 |
Orthopedic |
11-396 |
Complete |
ISO |
7206-13 First edition 2016-07-01 [Including AMD1:2022] |
Implants for surgery - Partial and total hip joint prostheses - Part 13: Determination of resistance to torque of head fixation of stemmed femoral components [Including AMENDMENT 1 (2022)] |
12/19/2022 |
Orthopedic |
11-397 |
Complete |
ASTM |
F3210-22e1 |
Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions |
12/19/2022 |
Orthopedic |
11-398 |
Complete |
ASTM |
F3574-22 |
Standard Test Methods for Sacroiliac Joint Fusion Devices |
12/19/2022 |
Physical Medicine |
16-233 |
Complete |
ISO |
16840-10 Second edition 2021-06 Corrected version 2022-01 |
Wheelchair seating - Part 10: Resistance to ignition of postural support devices - Requirements and test method |
12/19/2022 |
Radiology |
12-346 |
Complete |
ISO |
12005 Third edition 2022-05 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization |
12/19/2022 |
Radiology |
12-349 |
Complete |
NEMA |
PS 3.1 - 3.20 2022d |
Digital Imaging and Communications in Medicine (DICOM) Set |
12/19/2022 |
Software/ Informatics |
13-121 |
Complete |
ANSI AAMI UL |
2800-1:2022 |
Standard for Medical Device Interoperability |
12/19/2022 |
Software/ Informatics |
13-122 |
Complete |
IEC |
81001-5-1 Edition 1.0 2021-12 |
Health software and health IT systems safety, effectiveness and security - Part 5-1: Security - Activities in the product life cycle
|
12/19/2022 |
Software/ Informatics |
13-123 |
Complete |
ANSI NEMA |
HN 1-2019 |
American National Standard Manufacturer Disclosure Statement for Medical Device Security |
12/19/2022 |
Software/ Informatics |
13-124 |
Complete |
AAMI |
CR34971:2022 |
Guidance on the Application of ISO 14971 to Artificial Intelligence and Machine Learning |
12/19/2022 |
Software/ Informatics |
13-125 |
Complete |
ANSI AAMI UL |
2800-1-1:2022 |
Standard for Risk Concerns for Interoperable Medical Products |
12/19/2022 |
Software/ Informatics |
13-126 |
Complete |
ANSI AAMI UL |
2800-1-2:2022 |
Standard for Interoperable Item Development Life Cycle |
12/19/2022 |
Software/ Informatics |
13-127 |
Complete |
ANSI AAMI UL |
2800-1-3:2022 |
Standard for Interoperable Item Integration Life Cycle |
12/19/2022 |
Software/ Informatics |
13-128 |
Complete |
IEEE UL |
Std 2621.2-2022 |
Standard for Wireless Diabetes Device Security: Information Security Requirements for Connected Diabetes Solutions |
12/19/2022 |
Sterility |
14-580 |
Complete |
ISO |
11137-2 Third edition 2013-06 [Including AMD1:2022] |
Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose [Including Amendment 1 (2022)] |
12/19/2022 |
Sterility |
14-581 |
Complete |
ASTM |
F2638-22 |
Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier |
12/19/2022 |
Sterility |
14-582 |
Complete |
AAMI ISO |
TIR11137-4:2022 |
Sterilization of health care products - Radiation - Part 4: Guidance on process control |
ISO |
TS 11137-4 First edition 2020-06 |
Sterilization of health care products - Radiation - Part 4: Guidance on process control |
12/19/2022 |
Sterility |
14-583 |
Complete |
ANSI AAMI |
ST98:2022 |
Cleaning validation of health care products - Requirements for development and validation of a cleaning process for medical devices |
05/30/2022 |
Anesthesiology |
1-152 |
Complete |
ISO |
80601-2-87 First edition 2021-04 |
Medical electrical equipment - Part 2-87: Particular requirements for basic safety and essential performance of high-frequency ventilators |
05/30/2022 |
Cardiovascular |
3-181 |
Complete |
ISO |
25539-2 Third edition 2020-09 |
Cardiovascular implants - Endovascular devices - Part 2: Vascular stents |
05/30/2022 |
Cardiovascular |
3-182 |
Complete |
ASTM |
F3036-21 |
Standard Guide for Testing Absorbable Stents |
05/30/2022 |
Dental/ ENT |
4-293 |
Complete |
ANSI ADA |
Standard No. 119-2021 |
Manual Toothbrushes |
05/30/2022 |
General II (ES/ EMC) |
19-46 |
Complete |
ANSI AAMI |
ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD) [Including Amendment 2 (2021)] |
05/30/2022 |
General II (ES/ EMC) |
19-47 |
Complete |
ANSI AAMI |
HA60601-1-11:2015 [Including AMD1:2021] |
Medical Electrical Equipment -- Part 1-11: General requirements for basic safety and essential performance -- Collateral Standard: Requirements for medical electrical equipment and medical electrical equipment and medical electrical systems used in the home healthcare environment (IEC 60601-1-11:2015 MOD) [Including Amendment1 (2021)] |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-475 |
Complete |
ISO |
11608-4:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-476 |
Complete |
ISO |
11608-2:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-477 |
Complete |
ISO |
11608-3:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-478 |
Complete |
ISO |
11608-1:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-479 |
Complete |
ISO |
11608-5:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-480 |
Complete |
ISO |
11608-6:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 6: On-body delivery |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-481 |
Complete |
ANSI AAMI |
CN27:2021 |
General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-482 |
Complete |
AAMI |
TIR101:2021 |
Fluid delivery performance testing for infusion pumps |
05/30/2022 |
InVitro Diagnostics |
7-312 |
Complete |
CLSI |
M39 5th Edition |
Analysis and Presentation of Cumulative Antimicrobial Susceptibility Test Data |
05/30/2022 |
Materials |
8-583 |
Complete |
ASTM |
F562-22 |
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
05/30/2022 |
Materials |
8-584 |
Complete |
ASTM |
F2146-22 |
Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
05/30/2022 |
Materials |
8-585 |
Complete |
ASTM |
F1377-21 |
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
05/30/2022 |
Materials |
8-586 |
Complete |
ASTM |
F2989-21 |
Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
05/30/2022 |
Materials |
8-587 |
Complete |
ISO |
5832-3 Fifth Edition 2021-11 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
05/30/2022 |
Materials |
8-588 |
Complete |
ASTM |
F560-22 |
Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
05/30/2022 |
Materials |
8-589 |
Complete |
ASTM |
F1925-22 |
Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
05/30/2022 |
Materials |
8-590 |
Complete |
ISO |
TS 17137 Third edition 2021-09 |
Cardiovascular implants and extracorporeal systems - Cardiovascular absorbable implants |
05/30/2022 |
Materials |
8-591 |
Complete |
ASTM |
F2229-21 |
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
05/30/2022 |
Materials |
8-592 |
Complete |
ASTM |
F3384-21 |
Standard Specification for Polydioxanone Polymer Resins for Surgical Implants |
05/30/2022 |
Materials |
8-593 |
Complete |
ISO |
13779-6 First Edition 2015-01-15 Corrected Version 2016-09-15 |
Implants for surgery - Hydroxyapatite - Part 6: Powders |
05/30/2022 |
ObGyn/ Gastroenterology/ Urology |
9-139 |
Complete |
CIE ISO |
11664-5:2016 |
Colorimetry - Part 5: CIE 1976 L*u*v* colour space and u',v' uniform chromaticity scale diagram |
05/30/2022 |
Ophthalmic |
10-131 |
Complete |
ISO |
15798 Fourth edition 2022-01 |
Ophthalmic implants - Ophthalmic viscosurgical devices |
05/30/2022 |
Physical Medicine |
16-166 |
Partial |
ISO |
7176-21 Second edition 2009-04-01 |
Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
05/30/2022 |
Radiology |
12-343 |
Complete |
IEC |
62127-1 Edition 2.0 2022-03 |
Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields |
05/30/2022 |
Radiology |
12-344 |
Complete |
IEC |
62563-2 Edition 1.0 2021-11 |
Medical electrical equipment - Medical image display systems - Part 2: Acceptance and constancy tests for medical image displays |
05/30/2022 |
Radiology |
12-345 |
Complete |
IEC |
61223-3-7 Edition 1.0 2021-12 |
Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography |
05/30/2022 |
Sterility |
14-572 |
Partial |
ANSI AAMI |
ST91:2021 |
Flexible and semi-rigid endoscope processing in health care facilities |
05/30/2022 |
Sterility |
14-573 |
Complete |
ASTM |
F88/F88M-21 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
05/30/2022 |
Sterility |
14-574 |
Complete |
ASTM |
F1608-21 |
Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) |
05/30/2022 |
Sterility |
14-576 |
Complete |
ASTM |
D4169-22 |
Standard Practice for Performance Testing of Shipping Containers and Systems |
05/30/2022 |
Sterility |
14-577 |
Complete |
ISO |
11737-1 Third edition 2018-01 [Including AMD1:2021] |
Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on product [Including Amendment 1 (2021)] |
05/30/2022 |
Sterility |
14-578 |
Partial |
ISO |
17664-1 First edition 2021-07 |
Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 1: Critical and semi-critical medical devices |
05/30/2022 |
Sterility |
14-579 |
Complete |
ISO |
17664-2 First edition 2021-02 |
Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 2: Non-critical medical devices. |
02/07/2022 |
General II (ES/ EMC) |
19-45 |
Complete |
AIM |
Standard 7351731 Rev. 3.00 2021-06-04 |
Medical Electrical Equipment and System Electromagnetic Immunity Test for Exposure to Radio Frequency Identification Readers - An AIM Standard |
12/20/2021 |
Biocompatibility |
2-292 |
Complete |
USP-NF |
M98833_01_01 |
<87> Biological Reactivity Test, In Vitro - Direct Contact Test |
12/20/2021 |
Biocompatibility |
2-293 |
Complete |
USP-NF |
M98833_01_01 |
<87> Biological Reactivity Test, In Vitro - Elution Test |
12/20/2021 |
Biocompatibility |
2-294 |
Partial |
USP-NF |
M98834_01_01 |
<88> Biological Reactivity Tests, In Vivo |
12/20/2021 |
Biocompatibility |
2-295 |
Partial |
USP-NF |
M98900_01_01 |
<151> Pyrogen Test (USP Rabbit Test) |
12/20/2021 |
Cardiovascular |
3-171 |
Complete |
ASTM |
F2514-21 |
Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading |
12/20/2021 |
Cardiovascular |
3-172 |
Complete |
AAMI |
TIR42:2021 |
Evaluation of Particulates Associated with Vascular Medical Devices |
12/20/2021 |
Cardiovascular |
3-173 |
Complete |
ISO |
5840-3 Second edition 2021-01 |
Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques |
12/20/2021 |
Cardiovascular |
3-174 |
Partial |
ISO |
5840-1 Second edition 2021-01 |
Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements |
12/20/2021 |
Cardiovascular |
3-175 |
Complete |
ISO |
5840-2 Second edition 2021-01 |
Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes |
12/20/2021 |
Cardiovascular |
3-176 |
Complete |
ISO |
18193 First edition 2021-08 |
Cardiovascular implants and artificial organs - Cannulae for extracorporeal circulation |
12/20/2021 |
Cardiovascular |
3-177 |
Complete |
ASTM |
F2606-08 (Reapproved 2021) |
Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems |
12/20/2021 |
Cardiovascular |
3-178 |
Complete |
ASTM |
F3067-14 (Reapproved 2021) |
Standard Guide for Radial Loading of Balloon-Expandable and Self-Expanding Vascular Stents |
12/20/2021 |
Cardiovascular |
3-179 |
Complete |
ASTM |
F3172-15 (Reapproved 2021) |
Standard Guide for Design Verification Device Size and Sample Size Selection for Endovascular Devices |
12/20/2021 |
Cardiovascular |
3-180 |
Complete |
ASTM |
F3505-21 |
Standard Test Method for Stent and Endovascular Prosthesis Kink Resistance |
12/20/2021 |
Dental/ ENT |
4-284 |
Complete |
ISO |
10873 Second edition 2021-07 |
Dentistry - Denture adhesives |
12/20/2021 |
Dental/ ENT |
4-285 |
Complete |
ANSI ADA |
Standard No. 37-1986 (R2020) |
Dental Abrasive Powders |
12/20/2021 |
Dental/ ENT |
4-286 |
Complete |
ANSI ADA |
Standard No. 87-1995 (R2014) |
Dental Impression Trays |
12/20/2021 |
Dental/ ENT |
4-287 |
Complete |
ANSI ADA |
Standard No. 116-2020 |
Oral Rinses (Modified adoption of ISO 16408:2015, Dentistry Oral Care Products -Oral Rinses) |
12/20/2021 |
Dental/ ENT |
4-288 |
Complete |
ISO |
7488 Second edition 2018-04 |
Dentistry - Mixing machines for dental amalgam |
ANSI ADA |
Standard No. 43-2020 |
Electrically Powered Dental Amalgamators |
12/20/2021 |
Dental/ ENT |
4-289 |
Complete |
ISO |
18556 Frist edition 2016-04 |
Dentistry - Intraoral spatulas |
12/20/2021 |
Dental/ ENT |
4-290 |
Complete |
ISO |
28158 Second edition 2018-09 |
Dentistry - Integrated dental floss and handles |
ANSI ADA |
Standard No. 185-2020 |
Integrated Dental Floss and Handles |
12/20/2021 |
Dental/ ENT |
4-291 |
Complete |
ISO |
28399 First edition 2011-01 |
Dentistry - Products for external tooth bleaching |
ANSI ADA |
Standard No. 136-2015 (R2020) |
Products for External Tooth Bleaching |
12/20/2021 |
Dental/ ENT |
4-292 |
Complete |
ISO |
28888 First edition 2013-10 |
Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues |
ANSI ADA |
Standard No. 151-2015 (R2020) |
Screening Method for Erosion Potential of Oral Rinses on Dental Hard Tissues |
12/20/2021 |
General I (QS/ RM) |
5-134 |
Complete |
ISO |
15223-1 Fourth edition 2021-07 |
Medical devices - Symbols to be used with information to be supplied by the manufacturer - Part 1: General requirements |
12/20/2021 |
General II (ES/ EMC) |
19-41 |
Complete |
ANSI UL |
61010-1 3rd Ed, dated May 12, 2012 with revision through July 19, 2019 |
Standard for Safety for Electrical Equipment For Measurement, Control and Laboratory Use; Part 1: General Requirements |
12/20/2021 |
General II (ES/ EMC) |
19-42 |
Partial |
IEC |
61326-1 Edition 3.0 2020-10 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
12/20/2021 |
General II (ES/ EMC) |
19-43 |
Partial |
IEC |
61326-2-6 Edition 3.0 2020-10 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
12/20/2021 |
General II (ES/ EMC) |
19-44 |
Complete |
IEEE ANSI |
C63.24-2021 |
American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-464 |
Complete |
ISO |
11040-4 Third edition 2015-04-01 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling [Including AMENDMENT 1 (2020)] |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-465 |
Complete |
USP-NF |
M76090_03_01 |
Sodium Chloride Irrigation |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-466 |
Complete |
USP-NF |
M76070_03_01 |
Sodium Chloride Injection |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-467 |
Complete |
USP-NF |
M80200_04_01 |
Nonabsorbable Surgical Suture |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-468 |
Complete |
USP-NF |
M99670_02_01 |
<881> Tensile Strength |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-469 |
Complete |
USP-NF |
M99650_02_01 |
<861> Sutures - Diameter |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-470 |
Complete |
USP-NF |
M99660_03_01 |
<871> Sutures - Needle Attachment |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-471 |
Complete |
USP-NF |
M88880_05_01 |
Sterile Water for Irrigation |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-472 |
Complete |
USP-NF |
M36660_04_01 |
Heparin Lock Flush Solution |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-473 |
Complete |
USP-NF |
M80190_04_01 |
Absorbable Surgical Suture |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-474 |
Partial |
ASTM |
F3352-19 |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
12/20/2021 |
InVitro Diagnostics |
7-309 |
Complete |
ISO |
17099 First edition 2014-11-15 |
Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry |
12/20/2021 |
InVitro Diagnostics |
7-310 |
Complete |
ISO |
19238 Second edition 2014-02-01 |
Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
12/20/2021 |
InVitro Diagnostics |
7-311 |
Complete |
CLSI |
EP39, 1st Edition |
A Hierarchical Approach to Selecting Surrogate Samples for the Evaluation of In Vitro Medical Laboratory Tests |
12/20/2021 |
Materials |
8-563 |
Complete |
ASTM |
F1801-20 |
Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
12/20/2021 |
Materials |
8-564 |
Complete |
ASTM |
F2005-21 |
Standard Terminology for Nickel-Titanium Shape Memory Alloys |
12/20/2021 |
Materials |
8-565 |
Complete |
ASTM |
F2754/F2754M-21 |
Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire |
12/20/2021 |
Materials |
8-566 |
Complete |
ASTM |
F1813-21 |
Standard Specification for Wrought Titanium - 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical Implant (UNS R58120) |
12/20/2021 |
Materials |
8-567 |
Complete |
ASTM |
F86-21 |
Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
12/20/2021 |
Materials |
8-568 |
Complete |
ASTM |
F1586-21 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium-10 Nickel-3 Manganese-2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
12/20/2021 |
Materials |
8-569 |
Complete |
ASTM |
F648-21 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
12/20/2021 |
Materials |
8-570 |
Complete |
ASTM |
F1108-21 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
12/20/2021 |
Materials |
8-571 |
Complete |
ASTM |
F2052-21 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
12/20/2021 |
Materials |
8-572 |
Complete |
ASTM |
F2565-21 |
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
12/20/2021 |
Materials |
8-573 |
Complete |
ASTM |
F2695-12(2020) |
Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
12/20/2021 |
Materials |
8-574 |
Complete |
ASTM |
F2820-12(2021)e1 |
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
12/20/2021 |
Materials |
8-575 |
Complete |
ASTM |
F3160-21 |
Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
12/20/2021 |
Materials |
8-576 |
Complete |
ASTM |
F451-21 |
Standard Specification for Acrylic Bone Cement |
12/20/2021 |
Materials |
8-577 |
Complete |
ISO |
13179-1 Second Edition 2021-09 |
Implants for surgery -- Coatings on metallic surgical implants -- Part 1: Plasma-sprayed coatings derived from titanium or titanium-6 aluminum-4 vanadium alloy powders |
12/20/2021 |
Materials |
8-578 |
Complete |
ASTM |
F2848-21 |
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
12/20/2021 |
Materials |
8-579 |
Complete |
ISO |
13779-3 Second Edition 2018-12 |
Implants for surgery -- Hydroxyapatite -- Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity [Including AMENDMENT 1 (2021)] |
12/20/2021 |
Materials |
8-580 |
Complete |
IEC |
63145-20-10 Edition 1.0 2019-08 |
Eyewear display - Part 20-10: Fundamental measurement methods - Optical properties |
12/20/2021 |
Materials |
8-581 |
Complete |
IEC |
63145-20-20 Edition 1.0 2019-09 |
Eyewear display - Part 20-20: Fundamental measurement methods - Image quality |
12/20/2021 |
Materials |
8-582 |
Complete |
IEC |
63145-22-10 Edition 1.0 2020-01 |
Eyewear display - Part 22-10: Specific measurement methods for AR type - Optical properties |
12/20/2021 |
Nanotechnology |
18-19 |
Complete |
ISO |
19749 First edition 2021-07 |
Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy |
12/20/2021 |
Nanotechnology |
18-20 |
Complete |
ASTM |
E3275-21 |
Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis |
12/20/2021 |
Ophthalmic |
10-127 |
Complete |
ANSI |
Z80.21-2020 |
American National Standard for Ophthalmics - Instruments - General-Purpose Clinical Visual Acuity Charts |
12/20/2021 |
Ophthalmic |
10-128 |
Complete |
ASTM |
D882-18 |
Standard Test Methods for Tensile Properties of Thin Plastic Sheeting |
12/20/2021 |
Ophthalmic |
10-129 |
Complete |
ASTM |
D790-17 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
12/20/2021 |
Ophthalmic |
10-130 |
Complete |
ANSI |
Z80.36-2021 |
American National Standard for Ophthalmics - Light Hazard Protection for Ophthalmic Instruments |
12/20/2021 |
Orthopedic |
11-385 |
Complete |
ASTM |
F2345-21 |
Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads |
12/20/2021 |
Orthopedic |
11-386 |
Complete |
ASTM |
F2665-21 |
Standard Specification for Total Ankle Replacement Prosthesis |
12/20/2021 |
Orthopedic |
11-387 |
Complete |
ASTM |
F1781-21 |
Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants |
12/20/2021 |
Orthopedic |
11-388 |
Complete |
ASTM |
F1717-21 |
Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model |
12/20/2021 |
Orthopedic |
11-389 |
Complete |
ISO |
7206-10 Second edition 2018-08 |
Implants for surgery - Partial and total hip-joint prostheses - Part 10: Determination of resistance to static load of modular femoral heads [Including AMENDMENT 1 (2021)] |
12/20/2021 |
Orthopedic |
11-390 |
Complete |
ISO |
23089-2 First edition 2021-05 |
Implants for surgery - Preclinical mechanical assessment of spinal implants and particular requirements - Part 2: Spinal intervertebral body fusion devices |
12/20/2021 |
Orthopedic |
11-391 |
Complete |
ASTM |
F2722-21 |
Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
12/20/2021 |
Orthopedic |
11-392 |
Complete |
ASTM |
F2723-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
12/20/2021 |
Orthopedic |
11-393 |
Complete |
ASTM |
F2724-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
12/20/2021 |
Physical Medicine |
16-232 |
Complete |
IEC |
80601-2-78 Edition 1.0 2019-07 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation |
12/20/2021 |
Radiology |
12-341 |
Complete |
IEC |
62563-1 Edition 1.2 2021-07 CONSOLIDATED VERSION |
Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods |
12/20/2021 |
Software/ Informatics |
13-120 |
Complete |
ANSI AAMI |
2700-1:2019 |
Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model |
12/20/2021 |
Sterility |
14-563 |
Complete |
ISO |
13408-6 Second edition 2021-04 |
Aseptic processing of health care products - Part 6: Isolator systems |
12/20/2021 |
Sterility |
14-564 |
Complete |
USP-NF |
M98910_01_01 |
<161> Medical Devices-Bacterial Endotoxin and Pyrogen Tests |
12/20/2021 |
Sterility |
14-565 |
Complete |
USP-NF |
M98802_01_01 |
<62> Microbiological Examination of Nonsterile Products: Tests for Specified Microorganisms |
12/20/2021 |
Sterility |
14-566 |
Complete |
USP-NF |
M98795_02_01 |
<55> Biological Indicators -- Resistance Performance Tests |
12/20/2021 |
Sterility |
14-567 |
Complete |
USP-NF |
M7414_01_01 |
<1229.5> Biological Indicators for Sterilization |
12/20/2021 |
Sterility |
14-568 |
Complete |
USP-NF |
M98800_01_01 |
<61> Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests |
12/20/2021 |
Sterility |
14-569 |
Complete |
USP-NF |
M98810_01_01 |
<71> Sterility Tests |
12/20/2021 |
Sterility |
14-570 |
Complete |
USP-NF |
M98830_02_01 |
<85> Bacterial Endotoxins Test |
12/20/2021 |
Sterility |
14-571 |
Complete |
ISO |
11138-8 First edition 2021-07 |
Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator |
06/07/2021 |
Anesthesiology |
1-151 |
Complete |
ISO |
80601-2-70 Second edition 2020-11 |
Medical electrical equipment - Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment |
06/07/2021 |
Biocompatibility |
2-290 |
Partial |
ISO |
TS 37137-1 First edition 2021-03 |
Biological evaluation of absorbable medical devices - Part 1: General requirements. |
06/07/2021 |
Biocompatibility |
2-291 |
Partial |
ISO |
10993-23 First edition 2021-01 |
Biological evaluation of medical devices - Part 23: Tests for irritation |
06/07/2021 |
Cardiovascular |
3-129 |
Partial |
ANSI AAMI |
EC53:2013/(R)2020 |
ECG trunk cables and patient leadwires |
06/07/2021 |
Cardiovascular |
3-166 |
Partial |
ISO |
81060-2 Third edition 2018-11 |
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type [Including: Amendment 1 (2020)] |
06/07/2021 |
Cardiovascular |
3-168 |
Partial |
IEEE |
Std 1708-2014 |
Standard for Wearable, Cuffless Blood Pressure Measuring Devices [Including: Amendment 1 (2019)] |
06/07/2021 |
Cardiovascular |
3-170 |
Complete |
ISO |
14708-5 Second edition 2020-05 |
Implants for surgery - Active implantable medical devices - Part 5: Circulatory support devices |
06/07/2021 |
Dental/ ENT |
4-273 |
Complete |
ANSI ASA |
S3.7-2016 (Reaffirmed 2023) |
American National Standard Method for Coupler Calibration of Earphones |
06/07/2021 |
Dental/ ENT |
4-274 |
Complete |
ANSI ASA |
S3.2-2020 |
American National Standard Method for Measuring the Intelligibility of Speech over Communication Systems |
06/07/2021 |
Dental/ ENT |
4-275 |
Complete |
ANSI ASA |
S3.6-2018 |
American National Standard for Specification for Audiometers |
06/07/2021 |
Dental/ ENT |
4-276 |
Partial |
ISO |
14457 Second edition 2017-10 |
Dentistry - Handpieces and motors |
ANSI ADA |
Standard No. 35-2019 |
Dental Handpieces and Motors |
06/07/2021 |
Dental/ ENT |
4-277 |
Complete |
ANSI IEEE |
C63.19-2019 |
American National Standard Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids |
06/07/2021 |
Dental/ ENT |
4-278 |
Complete |
ISO |
4823 Fifth edition 2021-02 |
Dentistry - Elastomeric impression and bite registration materials |
ANSI ADA |
Standard No. 19-2022 |
Elastomeric Impression and Bite Registration |
06/07/2021 |
Dental/ ENT |
4-279 |
Complete |
ANSI ADA |
Standard No. 85-2004 (R2009) |
Part 1: Disposable Prophy Angles |
06/07/2021 |
Dental/ ENT |
4-280 |
Partial |
ANSI ADA |
Standard No. 117-2018 |
Fluoride varnishes |
06/07/2021 |
Dental/ ENT |
4-281 |
Complete |
ISO |
1797 Third Edition 2017-05 |
Dentistry - Shanks for rotary and oscillating instruments |
ANSI ADA |
Standard No. 179-2020 |
Shanks for Rotary and Oscillating Instruments |
06/07/2021 |
Dental/ ENT |
4-283 |
Complete |
ISO |
16409 Second edition 2016-10 |
Dentistry - Oral care products - Manual interdental brushes |
ANSI ADA |
Standard No. 125-2018 |
Manual Interdental Brushes |
06/07/2021 |
General II (ES/ EMC) |
19-40 |
Complete |
IEC |
60086-4 Edition 5.0 2019-04 |
Primary batteries - Part 4: Safety of lithium batteries [Including: Corrigendum 1 (2019) and Corrigendum 2 (2020)] |
06/07/2021 |
General Plastic Surgery/ General Hospital |
6-389 |
Partial |
IEC |
60601-2-2 Edition 6.0 2017-03 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
ANSI AAMI IEC |
60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
06/07/2021 |
General Plastic Surgery/ General Hospital |
6-461 |
Complete |
IEC |
60601-2-19 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
06/07/2021 |
General Plastic Surgery/ General Hospital |
6-462 |
Complete |
IEC |
60601-2-20 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators |
06/07/2021 |
General Plastic Surgery/ General Hospital |
6-463 |
Complete |
IEC |
60601-2-21 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers |
06/07/2021 |
InVitro Diagnostics |
7-236 |
Partial |
CLSI |
M43-A October 2011 |
Methods for Antimicrobial Susceptibility Testing for Human Mycoplasmas; Approved Guideline |
06/07/2021 |
InVitro Diagnostics |
7-262 |
Partial |
CLSI |
M45 3rd Edition |
Methods for Antimicrobial Dilution and Disk Susceptibility Testing of Infrequently Isolated or Fastidious Bacteria |
06/07/2021 |
InVitro Diagnostics |
7-292 |
Partial |
CLSI |
M62 1st Edition |
Performance Standards for Susceptibility Testing of Mycobacteria, Nocardia spp., and other Aerobic Actinomycetes |
06/07/2021 |
InVitro Diagnostics |
7-306 |
Complete |
CLSI |
EP06 2nd Edition |
Evaluation of the Linearity of Quantitative Measurement Procedures |
06/07/2021 |
InVitro Diagnostics |
7-307 |
Complete |
CLSI |
POCT05 2nd Edition |
Performance Metrics for Continuous Interstitial Glucose Monitoring |
06/07/2021 |
Materials |
8-555 |
Complete |
ASTM |
F1472-20a |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
06/07/2021 |
Materials |
8-556 |
Complete |
ASTM |
F640-20 |
Standard Test Methods for Determining Radiopacity for Medical Use |
06/07/2021 |
Materials |
8-557 |
Complete |
ASTM |
F3268-18a |
Standard Guide for in vitro Degradation Testing of Absorbable Metals |
06/07/2021 |
Materials |
8-558 |
Complete |
ASTM |
F3333-20 |
Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
06/07/2021 |
Materials |
8-560 |
Complete |
ASTM |
D1415-18 |
Standard Test Method for Rubber Property - International Hardness |
06/07/2021 |
Materials |
8-561 |
Complete |
ASTM ISO |
52950 First edition 2021-01 |
Additive manufacturing - General principles - Overview of data processing |
06/07/2021 |
Materials |
8-562 |
Complete |
ISO ASTM |
52904 First edition 2019-08 |
Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-131 |
Complete |
ISO |
8600-5 Second Edition 2020-10 |
Optics and photonics - Medical endoscopes and endotherapy devices - Part 5: Determination of optical resolution of rigid endoscopes with optics |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-132 |
Complete |
ASTM |
F623-19 |
Standard Performance Specification for Foley Catheter |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-133 |
Partial |
ISO |
23500-1 First edition 2019-02 |
Preparation and Quality Management of Fluids for Haemodialysis and Related Therapies - Part 1: General Requirements |
ANSI AAMI ISO |
23500-1:2019 |
Preparation and Quality Management of Fluids for Haemodialysis and Related Therapies - Part 1: General Requirements |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-134 |
Complete |
ISO |
23500-2 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies |
ANSI AAMI ISO |
23500-2:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-135 |
Complete |
ISO |
23500-3 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies |
ANSI AAMI ISO |
23500-3:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-136 |
Complete |
ISO |
23500-4 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies |
ANSI AAMI ISO |
23500-4:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-137 |
Complete |
ISO |
23500-5 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
ANSI AAMI ISO |
23500-5:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-138 |
Complete |
ISO |
20695 First edition 2020-03 |
Enteral feeding systems - Design and testing |
06/07/2021 |
Ophthalmic |
10-122 |
Partial |
ISO |
10939 Third edition 2017-05 |
Ophthalmic instruments - Slit-lamp microscopes |
06/07/2021 |
Ophthalmic |
10-123 |
Partial |
ISO |
15004-1 Second edition 2020-5 |
Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments |
06/07/2021 |
Ophthalmic |
10-124 |
Complete |
ISO |
11979-1 Fourth edition 2018-11 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary |
06/07/2021 |
Ophthalmic |
10-125 |
Partial |
ISO |
11979-7 Fourth edition 2018-03 |
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia |
06/07/2021 |
Ophthalmic |
10-126 |
Complete |
IEC |
80601-2-58 Edition 2.0 2014-09 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
ANSI AAMI IEC |
80601-2-58:2014 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
06/07/2021 |
Orthopedic |
11-376 |
Complete |
ASTM |
F2033-20 |
Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
06/07/2021 |
Orthopedic |
11-377 |
Complete |
ASTM |
F2083-21 |
Standard Specification for Knee Replacement Prosthesis |
06/07/2021 |
Orthopedic |
11-378 |
Complete |
ASTM |
F2502-17 |
Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
06/07/2021 |
Orthopedic |
11-379 |
Complete |
ASTM |
F2978-20 |
Standards Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging |
06/07/2021 |
Orthopedic |
11-380 |
Complete |
ASTM |
F2979-20 |
Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses |
06/07/2021 |
Orthopedic |
11-381 |
Complete |
ASTM |
F2582-20 |
Standard Test Method for Dynamic Impingement Between Femoral and Acetabular Hip Components |
06/07/2021 |
Orthopedic |
11-382 |
Complete |
ASTM |
F3090-20 |
Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement |
06/07/2021 |
Orthopedic |
11-383 |
Complete |
ASTM |
F3143-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
06/07/2021 |
Orthopedic |
11-384 |
Complete |
ASTM |
F3446-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator |
06/07/2021 |
Physical Medicine |
16-231 |
Complete |
ISO |
10328 Second edition 2016-06-01 |
Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods |
06/07/2021 |
Radiology |
12-335 |
Complete |
IEC |
60336 Edition 5.0 2020-12 |
Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics |
06/07/2021 |
Radiology |
12-336 |
Complete |
IEC |
60601-1-3 Edition 2.2 2021-01 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
06/07/2021 |
Radiology |
12-337 |
Complete |
NEMA |
NU 1-2018 |
Performance Measurements of Gamma Cameras |
06/07/2021 |
Radiology |
12-338 |
Complete |
IEC |
60601-2-1 Edition 4.0 2020-10 |
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV |
06/07/2021 |
Radiology |
12-339 |
Complete |
IEC |
60601-2-63 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
06/07/2021 |
Radiology |
12-340 |
Complete |
IEC |
60601-2-65 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral-X-ray equipment |
06/07/2021 |
Software/ Informatics |
13-117 |
Partial |
IEEE |
Std 11073-40101-2020 |
Health informatics - Device interoperability Part 40101: Foundational - Cybersecurity - Processes for vulnerability assessment. |
06/07/2021 |
Software/ Informatics |
13-118 |
Complete |
IEEE |
Std 11073-40102:2020 |
Health informatics - Device interoperability. Part 40102: Foundational - Cybersecurity - Capabilities for mitigation. |
06/07/2021 |
Software/ Informatics |
13-119 |
Complete |
ANSI ISA |
62443-4-1-2018 |
Security for industrial automation and control systems Part 4-1: Product security development life-cycle requirements. |
06/07/2021 |
Sterility |
14-562 |
Complete |
ANSI AAMI |
ST79:2017 & 2020 Amendments A1, A2, A3, A4 |
(Consolidated Text) Comprehensive guide to steam sterilization and sterility assurance in health care facilities |
06/07/2021 |
Tissue Engineering |
15-66 |
Complete |
ASTM |
F2260-18 |
Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1HNMR) Spectroscopy |
06/07/2021 |
Tissue Engineering |
15-67 |
Complete |
ASTM |
F2212-20 |
Standard Guide for Characterization of Type I Collagen as Starting Materials for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
12/21/2020 |
Anesthesiology |
1-147 |
Complete |
ISO |
26825 Second edition 2020-10 |
Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance |
12/21/2020 |
Anesthesiology |
1-148 |
Complete |
ISO |
80601-2-69 Second edition 2020-11 |
Medical electrical equipment - Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment |
12/21/2020 |
Anesthesiology |
1-149 |
Complete |
ISO |
7376 Third edition 2020-08 |
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation |
12/21/2020 |
Anesthesiology |
1-150 |
Complete |
ISO |
8836 Fifth edition 2019-12 |
Suction catheters for use in the respiratory tract |
12/21/2020 |
Biocompatibility |
2-277 |
Complete |
ASTM |
F813-20 |
Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices |
12/21/2020 |
Biocompatibility |
2-278 |
Complete |
ASTM |
F719-20 e1 |
Standard Practice for Testing Materials in Rabbits for Primary Skin Irritation |
12/21/2020 |
Biocompatibility |
2-279 |
Complete |
ASTM |
F750-20 |
Standard Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse |
12/21/2020 |
Biocompatibility |
2-280 |
Complete |
ASTM |
F1408-20a |
Standard Practice for Subcutaneous Screening Test for Implant Materials |
12/21/2020 |
Biocompatibility |
2-281 |
Complete |
ISO |
TS 10993-19 Second edition 2020-03 |
Biological evaluation of medical devices - Part 19: Physico-chemical, morphological and topographical characterization of materials |
12/21/2020 |
Biocompatibility |
2-282 |
Complete |
ISO |
14155 Third edition 2020-07 |
Clinical investigation of medical devices for human subjects - Good clinical practice |
12/21/2020 |
Biocompatibility |
2-283 |
Complete |
ASTM |
F619-20 |
Standard Practice for Extraction of Materials Used in Medical Devices |
12/21/2020 |
Biocompatibility |
2-288 |
Partial |
ISO |
10993-15 Second edition 2019-11 |
Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys |
12/21/2020 |
Cardiovascular |
3-169 |
Partial |
IEC |
60601-2-4 Edition 3.1 2018-02 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
ANSI AAMI IEC |
60601-2-4:2010/A1:2018 (Consolidated Text) |
Medical electrical equipment Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators, including Amendment 1 |
12/21/2020 |
Dental/ ENT |
4-264 |
Complete |
ISO |
9333 Second edition 2006-07 |
Dentistry - Brazing materials |
ANSI ADA |
Standard No. 88-2019 |
Dental Brazing Alloys |
12/21/2020 |
Dental/ ENT |
4-265 |
Complete |
ISO |
10271 Third edition 2020-08 |
Dentistry - Corrosion test methods for metallic materials |
ANSI ADA |
Standard No. 97-2020 |
Corrosion Test Methods for Metallic Materials |
12/21/2020 |
Dental/ ENT |
4-266 |
Complete |
ISO |
19023 First edition 2018-02 |
Dentistry - Orthodontic anchor screws |
ANSI ADA |
Standard No. 178-2019 |
Orthodontic Anchor Screws |
12/21/2020 |
Dental/ ENT |
4-267 |
Complete |
ISO |
21606 First edition 2007-06 |
Dentistry - Elastomeric auxiliaries for use in orthodontics |
ANSI ADA |
Standard No. 105-2010 (R2015) |
Orthodontic Elastomeric Materials |
12/21/2020 |
Dental/ ENT |
4-268 |
Complete |
ISO |
15841 Second edition 2014-08 |
Dentistry - Wires for use in orthodontics [Including AMENDMENT 1 (2020)] |
ANSI ADA |
Standard No. 32-2017 |
Orthodontic Wires |
12/21/2020 |
Dental/ ENT |
4-269 |
Complete |
ISO |
3964 Third edition 11-2016 |
Dentistry - Coupling dimensions for handpiece connectors [Including AMENDMENT 1 (2018)] |
12/21/2020 |
Dental/ ENT |
4-270 |
Complete |
ANSI ADA |
Technical Report No. 146-2018 |
CAD/CAM Abutments in Dentistry |
12/21/2020 |
Dental/ ENT |
4-271 |
Complete |
ANSI ADA |
Standard No. 34-2013 |
Dental Cartridge Syringes |
12/21/2020 |
Dental/ ENT |
4-272 |
Complete |
ANSI ADA |
Standard No. 63-2013 |
Root Canal Barbed Broaches and Rasps |
12/21/2020 |
General I (QS/ RM) |
5-131 |
Complete |
IEC |
60601-1-8 Edition 2.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
ANSI AAMI IEC |
60601-1-8:2006 and A1:2012 [Including AMD 2:2021] |
Medical Electrical Equipment - Part 1-8: General requirements for basic safety and essential performance ¿ Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems [Including Amendment 2 (2021)] |
12/21/2020 |
General I (QS/ RM) |
5-132 |
Complete |
IEC |
60601-1-6 Edition 3.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
12/21/2020 |
General I (QS/ RM) |
5-133 |
Complete |
ISO |
80369-7 Second edition 2021-05 |
Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications |
12/21/2020 |
General II (ES/ EMC) |
19-36 |
Partial |
IEC |
60601-1-2 Edition 4.1 2020-09 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ANSI AAMI IEC |
60601-1-2:2014 [Including AMD 1:2021] |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests [Including Amendment 1 (2021)] |
12/21/2020 |
General II (ES/ EMC) |
19-37 |
Complete |
IEC |
60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
12/21/2020 |
General II (ES/ EMC) |
19-38 |
Partial |
IEC |
60601-1-11 Edition 2.1 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
12/21/2020 |
General II (ES/ EMC) |
19-39 |
Complete |
IEC |
60601-1-12 Edition 1.1 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
ANSI AAMI IEC |
60601-1-12:2016 [Including AMD 1:2021] |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency [Including Amendment 1(2021)] |
12/21/2020 |
General Plastic Surgery/ General Hospital |
6-448 |
Partial |
ASTM |
F2407-20 |
Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
12/21/2020 |
General Plastic Surgery/ General Hospital |
6-449 |
Partial |
ASTM |
F1169-19 |
Standard Consumer Safety Specification for Full-Size Baby Cribs |
12/21/2020 |
General Plastic Surgery/ General Hospital |
6-450 |
Complete |
IEC |
60601-2-50 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
12/21/2020 |
InVitro Diagnostics |
7-299 |
Complete |
CLSI |
POCT14 2nd Edition |
Point-of-Care Coagulation Testing and Anticoagulation Monitoring |
12/21/2020 |
InVitro Diagnostics |
7-300 |
Complete |
CLSI |
MM13 2nd Edition |
Collection, Transport, Preparation, and Storage of Specimens for Molecular Methods |
12/21/2020 |
InVitro Diagnostics |
7-301 |
Complete |
CLSI |
GP42 7th Edition |
Collection of Capillary Blood Specimens |
12/21/2020 |
InVitro Diagnostics |
7-302 |
Complete |
CLSI |
C34 4th Edition |
Sweat Testing: Specimen Collection and Quantitative Chloride Analysis |
12/21/2020 |
InVitro Diagnostics |
7-304 |
Complete |
CLSI |
M23 5th Edition |
Development of In Vitro Susceptibility Testing Criteria and Quality Control Parameters |
12/21/2020 |
InVitro Diagnostics |
7-305 |
Complete |
ISO |
17511 Second edition 2020-04 |
In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples |
12/21/2020 |
Materials |
8-537 |
Complete |
ASTM |
F620-20 |
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
12/21/2020 |
Materials |
8-538 |
Complete |
ASTM |
F2759-19 |
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
12/21/2020 |
Materials |
8-539 |
Complete |
ASTM |
F139-19 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
12/21/2020 |
Materials |
8-540 |
Complete |
ASTM |
F1091-20 |
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) |
12/21/2020 |
Materials |
8-541 |
Complete |
ASTM |
F1537-20 |
Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
12/21/2020 |
Materials |
8-542 |
Complete |
ASTM |
F138-19 |
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
12/21/2020 |
Materials |
8-543 |
Partial |
ASTM |
F755-19 |
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
12/21/2020 |
Materials |
8-544 |
Complete |
ASTM |
F961-20 |
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
12/21/2020 |
Materials |
8-545 |
Complete |
ASTM |
F2977-20 |
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
12/21/2020 |
Materials |
8-546 |
Complete |
ASTM |
F3044-20 |
Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
12/21/2020 |
Materials |
8-547 |
Complete |
ASTM |
F629-20 |
Standard Practice for Radiography of Cast Metallic Surgical Implants |
12/21/2020 |
Materials |
8-548 |
Complete |
ISO ASTM |
52915 Third edition 2020-03 |
Specification for additive manufacturing file format (AMF) Version 1.2 |
12/21/2020 |
Materials |
8-549 |
Complete |
ASTM |
F3208-20 |
Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
12/21/2020 |
Materials |
8-550 |
Complete |
ASTM |
F2181-20 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
12/21/2020 |
Materials |
8-551 |
Complete |
ASTM |
F2895-20 |
Standard Practice for Digital Radiography of Cast Metallic Implants |
12/21/2020 |
Materials |
8-552 |
Complete |
ASTM |
F3434-20 |
Guide for Additive manufacturing - Installation/Operation and Performance Qualification (IQ/OQ/PQ) of Laser-Beam Powder Bed Fusion Equipment for Production Manufacturing |
12/21/2020 |
Materials |
8-553 |
Complete |
ISO ASTM |
52903-1 First edition 2020-04 |
Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials |
12/21/2020 |
Materials |
8-554 |
Complete |
ISO ASTM |
TR 52912 First edition 2020-09 |
Additive manufacturing - Design - Functionally graded additive manufacturing |
12/21/2020 |
Nanotechnology |
18-17 |
Complete |
ISO |
21363 First edition 2020-06 |
Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy |
12/21/2020 |
Nanotechnology |
18-18 |
Complete |
ASTM |
E3247-20 |
Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering |
12/21/2020 |
Neurology |
17-17 |
Complete |
ASTM |
F3395/F3395M-19 |
Standard Specification for Neurosurgical Head Holder Devices |
12/21/2020 |
ObGyn/ Gastroenterology/ Urology |
9-130 |
Complete |
ISO |
8600-6 Second edition 2020-09 |
Endoscopes - Medical endoscopes and endotherapy devices - Part 6: Vocabulary |
12/21/2020 |
Ophthalmic |
10-119 |
Complete |
ISO |
11979-5 Third edition 2020-09 |
Ophthalmic implants - Intraocular Lenses - Part 5: Biocompatibility |
12/21/2020 |
Ophthalmic |
10-120 |
Complete |
ISO |
TR 22979 Second Edition 2017-05 |
Ophthalmic implants - Intraocular Lenses - Guidance on assessment of the need for clinical investigation of intraocular lens design modifications |
12/21/2020 |
Ophthalmic |
10-121 |
Complete |
ISO |
16672 Third edition 2020-06 |
Ophthalmic implants - Ocular endotamponades |
12/21/2020 |
Orthopedic |
11-330 |
Partial |
ASTM |
F2028-17 |
Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation |
12/21/2020 |
Orthopedic |
11-370 |
Complete |
ISO |
14879-1 Second edition 2020-07 |
Implants for surgery - Total knee-joint prostheses - Part 1: Determination of endurance properties of knee tibial trays |
12/21/2020 |
Orthopedic |
11-371 |
Complete |
ASTM |
F2009-20 |
Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses |
12/21/2020 |
Orthopedic |
11-372 |
Complete |
ASTM |
F2996-20 |
Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems |
12/21/2020 |
Orthopedic |
11-373 |
Complete |
ASTM |
F1223-20 |
Standard Test Method for Determination of Total Knee Replacement Constraint |
12/21/2020 |
Orthopedic |
11-374 |
Complete |
ISO |
7207-2 Second edition 2011-07-01 |
Implants for surgery - Components for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials [Including AMENDMENT 1 (2016) and AMENDMENT 2 (2020)] |
12/21/2020 |
Orthopedic |
11-375 |
Complete |
ASTM |
F2193-20 |
Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
12/21/2020 |
Physical Medicine |
16-230 |
Complete |
RESNA ANSI |
WC-2:2019 Section 25 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 25: Batteries and Chargers for Powered Wheelchairs |
12/21/2020 |
Sterility |
14-550 |
Complete |
ANSI AAMI |
ST67:2019 |
Sterilization of health care products - Requirements and guidance for selecting a sterility assurance level (SAL) for products labeled "sterile" |
12/21/2020 |
Sterility |
14-551 |
Complete |
ISO |
14160 Third edition 2020-09 |
Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
12/21/2020 |
Sterility |
14-552 |
Complete |
ISO ASTM |
51818 Fourth edition 2020-06 |
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV |
12/21/2020 |
Sterility |
14-553 |
Complete |
ASTM |
F2097-20 |
Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
12/21/2020 |
Sterility |
14-554 |
Complete |
ASTM |
F17-20 |
Standard Terminology Relating to Flexible Barrier Packaging |
12/21/2020 |
Tissue Engineering |
15-64 |
Partial |
ISO |
22442-1 Third edition 2020-09 |
Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management |
12/21/2020 |
Tissue Engineering |
15-65 |
Complete |
ISO |
22442-2 Third edition 2020-09 |
Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling |
10/19/2020 |
Software/ Informatics |
13-116 |
Complete |
FIRST |
CVSS v3.0 |
Common Vulnerability Scoring System version 3.0 |
07/06/2020 |
Anesthesiology |
1-146 |
Complete |
ISO |
80601-2-12 Second edition 2020-02 |
Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
07/06/2020 |
Biocompatibility |
2-273 |
Complete |
ISO |
10993-9 Third edition 2019-11 |
Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products |
07/06/2020 |
Biocompatibility |
2-274 |
Complete |
ASTM |
F749-20 |
Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit |
07/06/2020 |
Biocompatibility |
2-275 |
Complete |
ISO |
10993-7 Second edition 2008-10-15 |
Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals [Including: Technical Corrigendum 1 (2009), AMENDMENT 1: Applicability of allowable limits for neonates and infants (2019)] |
07/06/2020 |
Biocompatibility |
2-276 |
Partial |
ISO |
10993-18 Second edition 2020-01 |
Biological evaluation of medical devices - Part 18: Chemical characterization of medical device materials within a risk management process. |
07/06/2020 |
Cardiovascular |
3-123 |
Partial |
IEC |
80601-2-30: Edition 2.0 2018-03 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
ANSI AAMI IEC |
80601-2-30:2018 |
Medical electrical equipment - Part 2-30: Particular requirements for basic safety and essential performance of automated type non-invasive sphygmomanometers |
07/06/2020 |
Cardiovascular |
3-155 |
Complete |
IEC |
60601-2-47 Edition 2.0 2012-02 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performanceof ambulatory electrocardiographic systems |
ANSI AAMI IEC |
60601-2-47:2012/(R)2016 |
Medical electrical equipment -- Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
07/06/2020 |
Cardiovascular |
3-164 |
Complete |
ASTM |
F1830-19 |
Standard Practice for Collection and Preparation of Blood for Dynamic In Vitro Evaluation of Blood Pumps |
07/06/2020 |
Cardiovascular |
3-165 |
Complete |
ASTM |
F1841-19 |
Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps |
07/06/2020 |
Cardiovascular |
3-167 |
Complete |
ISO |
TS 81060-5 First edition 2020-02 |
Non-invasive sphygmomanometers - Part 5: Requirements for the repeatability and reproducibility of NIBP simulators for testing of automated non-invasive sphygmomanometers |
07/06/2020 |
Dental/ ENT |
4-263 |
Complete |
ISO |
9693 Third edition 2019-10 |
Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems |
ANSI ADA |
Standard No. 38-2020 |
Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems |
07/06/2020 |
General I (QS/ RM) |
5-126 |
Complete |
ISTA |
3A 2018 |
Packaged-Products for Parcel Delivery System Shipment 70 kg (150 lb) or Less |
07/06/2020 |
General I (QS/ RM) |
5-127 |
Complete |
ISTA |
3B 2017 |
Packaged-Products for Less-Than-Truckload (LTL) Shipment |
07/06/2020 |
General I (QS/ RM) |
5-128 |
Complete |
ISTA |
3E 2017 |
Similar Packaged-Products in Unitized Loads of Truckload Shipment |
07/06/2020 |
General I (QS/ RM) |
5-129 |
Complete |
IEC |
62366-1 Edition 1.1 2020-06 CONSOLIDATED VERSION |
Medical devices - Part 1: Application of usability engineering to medical devices |
ANSI AAMI IEC |
62366-1:2015+AMD1:2020 (Consolidated Text) |
Medical devices Part 1: Application of usability engineering to medical devices, including Amendment 1 |
07/06/2020 |
General I (QS/ RM) |
5-130 |
Complete |
ISO |
7010 Third edition 2019-07 |
Graphical symbols - Safety colours and safety signs - Registered safety signs |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-178 |
Partial |
ASTM |
D6124-06(2022) |
Standard Test Method for Residual Powder on Medical Gloves |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-439 |
Complete |
ISO |
7886-2 Second edition 2020-04 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-440 |
Partial |
ASTM |
D3578-19(2023) |
Standard Specification for Rubber Examination Gloves |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-441 |
Complete |
ISO |
7886-3 Second edition 2020-05 |
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-442 |
Partial |
ASTM |
D6977-19(2023) |
Standard Specification for Polychloroprene Examination Gloves for Medical Application |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-443 |
Partial |
ASTM |
D3577-19 |
Standard Specification for Rubber Surgical Gloves |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-444 |
Complete |
ASTM |
D7103-19(2023) |
Standard Guide for Assessment of Medical Gloves |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-445 |
Partial |
ASTM |
D5250-19(2023) |
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-446 |
Partial |
ASTM |
D6319-19(2023) |
Standard Specification for Nitrile Examination Gloves for Medical Application |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-447 |
Complete |
ISO |
8536-4 Sixth edition 2019-09 |
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
07/06/2020 |
InVitro Diagnostics |
7-296 |
Partial |
CLSI |
EP09c 3rd Edition |
Measurement Procedure Comparison and Bias Estimation Using Patient Samples |
07/06/2020 |
InVitro Diagnostics |
7-297 |
Complete |
ISO |
TS 20914 First edition 2019-07 |
Medical laboratories - Practical guidance for the estimation of measurement uncertainty |
07/06/2020 |
InVitro Diagnostics |
7-298 |
Complete |
CLSI |
EP35, 1st Edition |
Assessment of Equivalence or Suitability of Specimen Types for Medical Laboratory Measurement Procedures |
07/06/2020 |
Materials |
8-526 |
Complete |
ASTM |
F2182-19e2 |
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance |
07/06/2020 |
Materials |
8-527 |
Complete |
ASTM |
F899-20 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
07/06/2020 |
Materials |
8-528 |
Complete |
ASTM |
F2503-20 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
07/06/2020 |
Materials |
8-529 |
Complete |
ASTM |
F2633-19 |
Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
07/06/2020 |
Materials |
8-531 |
Complete |
ASTM |
F3321-19 |
Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices |