|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 12/23/2024 |
Anesthesiology |
1-182 |
Complete |
ISO |
5362 Fifth edition 2024-07 |
Anaesthetic and respiratory equipment - Anaesthetic reservoir bags |
| 12/23/2024 |
Anesthesiology |
1-183 |
Complete |
ASTM |
G175-24 |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 12/23/2024 |
Anesthesiology |
1-184 |
Complete |
ISO |
80601-2-55 Second edition 2018-02 [Including AMD1:2023] |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitor [Including Amendment 1 (2023)]. |
| 12/23/2024 |
Anesthesiology |
1-185 |
Complete |
ISO |
80601-2-79 Second edition 2024-08 |
Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment |
| 12/23/2024 |
Anesthesiology |
1-186 |
Complete |
ISO |
80601-2-80 Second edition 2024-08 |
Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency |
| 12/23/2024 |
Anesthesiology |
1-187 |
Complete |
ISO |
80601-2-12 Third edition 2023-11 |
Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| 12/23/2024 |
Anesthesiology |
1-188 |
Complete |
ISO |
80601-2-84 Second edition 2023-11 |
Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment |
| 12/23/2024 |
Anesthesiology |
1-189 |
Complete |
ISO |
4135 Fourth edition 2022-01 |
Anaesthetic and respiratory equipment - Vocabulary |
| 12/23/2024 |
Anesthesiology |
1-190 |
Complete |
ISO |
9360-1 First edition 2000-03 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| 12/23/2024 |
Anesthesiology |
1-191 |
Complete |
ISO |
9360-2 First edition 2001-07 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| 12/23/2024 |
Anesthesiology |
1-192 |
Complete |
ISO |
23371 First edition 2022-05 |
Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices |
| 12/23/2024 |
Biocompatibility |
2-304 |
Partial |
ASTM |
F2382-24 |
Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT) |
| 12/23/2024 |
Cardiovascular |
3-193 |
Complete |
ISO |
12417-1 Second edition 2024-02 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements |
| 12/23/2024 |
Cardiovascular |
3-194 |
Complete |
ISO |
7199 Fourth edition 2024-09 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| 12/23/2024 |
Cardiovascular |
3-195 |
Partial |
ISO |
5910 Second edition 2024-07 |
Cardiovascular implants and extracorporeal systems - Cardiac valve repair devices |
| 12/23/2024 |
Cardiovascular |
3-196 |
Partial |
ISO |
81060-2 Third edition 2018-11 [Including AMD1:2020 and AMD2:2024] |
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type [Including: AMENDMENT 1 (2020) and AMENDMENT 2 (2024)] |
| 12/23/2024 |
Cardiovascular |
3-197 |
Complete |
ISO |
25539-4 First edition 2021-11 |
Cardiovascular implants - Endovascular devices - Part 4: Application of ISO 17327-1 for coated endovascular devices |
| 12/23/2024 |
Dental/
ENT |
4-328 |
Complete |
ANSI ADA |
Standard No. 57-2021 |
Endodontic Sealing Materials |
| 12/23/2024 |
Dental/
ENT |
4-329 |
Complete |
ISO |
6872 Fifth edition 2024-08 |
Dentistry - Ceramic materials |
| 12/23/2024 |
Dental/
ENT |
4-330 |
Complete |
ANSI ADA |
Standard No. 63-2020 |
Endodontic Instruments - Auxillary |
| 12/23/2024 |
Dental/
ENT |
4-331 |
Complete |
ISO |
28399 Third edition 2021-03 |
Dentistry - External tooth bleaching products |
| ANSI ADA |
Standard No. 136-2022 |
Dentistry - External Tooth Bleaching Products |
| 12/23/2024 |
Dental/
ENT |
4-332 |
Complete |
ADA ANSI |
Standard No. 206-2024 |
Implantable Materials for Bone Filling and Augmentation in Oral and Maxillofacial Surgery - Contents of a Technical File |
| 12/23/2024 |
Dental/
ENT |
4-333 |
Complete |
ISO |
3630-4 Second edition 2023-08 |
Dentistry - Endodontic instruments - Part 4: Auxiliary instruments |
| 12/23/2024 |
Dental/
ENT |
4-334 |
Complete |
ISO |
11143 Second edition 2008-07 |
Dentistry - Amalgam separators |
| ANSI ADA |
Standard No. 108-2009, Addendum (R2022) |
Amalgam Separators |
| 12/23/2024 |
Dental/
ENT |
4-335 |
Complete |
ISO |
11499 Third edition 2014-06 |
Dentistry - Single-use cartridges for local anaesthetics |
| ANSI ADA |
Standard No. 190-2020 |
Single-Use Dental Cartridges for Local Anesthetics |
| 12/23/2024 |
Dental/
ENT |
4-336 |
Complete |
ISO |
18397 First edition 2016-01 |
Dentistry - Powered scaler |
| ANSI ADA |
Standard No. 157-2020 |
Powered Dental Scaler Handpieces and Tips |
| 12/23/2024 |
Dental/
ENT |
4-337 |
Complete |
ISO |
20608 First edition 2018-04 |
Dentistry - Powder jet handpieces and powders |
| 12/23/2024 |
Dental/
ENT |
4-338 |
Complete |
ISO |
22683 First edition 2022-05 |
Dentistry - Rotational adaptability test between implant body and implant abutment in dental implant systems |
| 12/23/2024 |
General I (QS/
RM) |
5-143 |
Complete |
ISO |
14630 Fffth edition 2024-09 |
Non-active surgical implants -- General requirements |
| 12/23/2024 |
General II (ES/
EMC) |
19-51 |
Complete |
UL |
1642 Sixth Edition September 29, 2020 |
Standard For Safety Lithium Batteries |
| 12/23/2024 |
General II (ES/
EMC) |
19-52 |
Complete |
UL |
2054 Third Edition November 17, 2021 |
Standard For Safety Household and Commercial Batteries |
| 12/23/2024 |
General II (ES/
EMC) |
19-53 |
Complete |
IEC |
TS 60601-4-6 Edition 1.0 2024-04 |
Medical electrical equipment - Part 4-6: Guidance and interpretation - Voluntary guidance to help achieve basic safety and essential performance with regard to the possible effects of electromagnetic disturbances |
| 12/23/2024 |
General Plastic Surgery/
General Hospital |
6-503 |
Complete |
ISO |
16571 Second edition 2024-03 |
Systems for evacuation of plume generated by medical device |
| 12/23/2024 |
General Plastic Surgery/
General Hospital |
6-504 |
Complete |
ASTM |
F1862/F1862M-24 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 12/23/2024 |
InVitro Diagnostics |
7-322 |
Complete |
CLSI |
M47 2nd Edition |
Principles and Procedures for Blood Cultures |
| 12/23/2024 |
InVitro Diagnostics |
7-323 |
Complete |
CLSI |
EP19 3rd Edition |
A Framework for Using CLSI Documents to Evaluate Clinical Laboratory Measurement Procedures |
| 12/23/2024 |
InVitro Diagnostics |
7-324 |
Complete |
CLSI |
M07 12th Edition |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically |
| 12/23/2024 |
InVitro Diagnostics |
7-325 |
Partial |
CLSI |
M02 14th Edition |
Performance Standards for Antimicrobial Disk Susceptibility Tests |
| 12/23/2024 |
InVitro Diagnostics |
7-326 |
Partial |
CLSI |
M24S 2nd Edition |
Performance Standards for Susceptibility Testing of Mycobacteria, Nocardia spp., and Other Aerobic Actinomycetes |
| 12/23/2024 |
InVitro Diagnostics |
7-327 |
Partial |
CLSI |
M100 34th Edition |
Performance Standards for Antimicrobial Susceptibility Testing |
| 12/23/2024 |
Materials |
8-618 |
Complete |
ASTM |
F1350-24 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| 12/23/2024 |
Materials |
8-619 |
Complete |
ISO |
5832-4 Fourth edition 2024-04 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
| 12/23/2024 |
Materials |
8-620 |
Complete |
ISO |
5832-11 Third edition 2024-03 |
Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 12/23/2024 |
Materials |
8-621 |
Complete |
ISO |
5832-1 Sixth edition 2024-04 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel |
| 12/23/2024 |
Materials |
8-622 |
Complete |
ASTM |
F2004-24 |
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| 12/23/2024 |
Materials |
8-623 |
Complete |
ASTM |
F1314-24 |
Standard Specification for Wrought Nitrogen Strengthened 22Chromium-13Nickel-5Manganese-2.5Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| 12/23/2024 |
Materials |
8-624 |
Complete |
ASTM |
F2129-24 |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| 12/23/2024 |
Materials |
8-625 |
Complete |
ASTM |
F1295-24 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 12/23/2024 |
Materials |
8-626 |
Complete |
ASTM |
E2948-24 |
Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire |
| 12/23/2024 |
Materials |
8-627 |
Complete |
ASTM |
F3604-23 |
Standard Practice for Validating the Additive Manufacturing (AM) Production Process for Medical Devices Produced Using Laser Powder Bed Fusion. |
| 12/23/2024 |
Orthopedic |
11-410 |
Complete |
ASTM |
F3161-24 |
Standard Test Method for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Femoral Components under Closing Conditions |
| 12/23/2024 |
Orthopedic |
11-411 |
Complete |
ASTM |
F1611-20 (Reapproved 2024) |
Standard Specification for Intramedullary Reamers |
| 12/23/2024 |
Orthopedic |
11-412 |
Complete |
ASTM |
F3129-24 |
Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses |
| 12/23/2024 |
Orthopedic |
11-413 |
Complete |
ASTM |
F543-23 |
Standard Specification and Test Methods for Metallic Medical Bone Screws |
| 12/23/2024 |
Orthopedic |
11-414 |
Complete |
ASTM |
F382-24 |
Standard Specification and Test Method for Metallic Bone Plates |
| 12/23/2024 |
Orthopedic |
11-415 |
Complete |
ASTM |
F2554-22 |
Standard Practice for Measurement of Positional Accuracy of Computer-Assisted Surgical Systems |
| 12/23/2024 |
Orthopedic |
11-416 |
Complete |
ASTM |
F2996-24 |
Standard Test Method for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems |
| 12/23/2024 |
Orthopedic |
11-417 |
Complete |
ASTM |
F3090-24 |
Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement and Performance Requirements |
| 12/23/2024 |
Orthopedic |
11-418 |
Complete |
ASTM |
F3631-24 |
Standard Test Method for Assessment of Intra-operative Durability of Intervertebral Body Fusion Devices
|
| 12/23/2024 |
Orthopedic |
11-419 |
Complete |
ASTM |
F3690-24 |
Standard Test Method for Evaluating Suture Anchor Insertion and Pull Displacement Resistance |
| 12/23/2024 |
Radiology |
12-362 |
Complete |
IEC |
61674 Edition 3.0 2024-07 |
Medical electrical equipment -- Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| 12/23/2024 |
Radiology |
12-363 |
Complete |
NEMA |
PS 3.1 - 3.20 2024e |
Digital Imaging and Communications in Medicine (DICOM) Set |
| 12/23/2024 |
Radiology |
12-364 |
Complete |
IEC |
61223-3-8 Edition 1.0 2024-03 |
Evaluation and routine testing in medical imaging departments - Part 3-8: Acceptance and constancy tests - Imaging performance of X-ray equipment for radiography and radioscopy
|
| 12/23/2024 |
Radiology |
12-365 |
Complete |
IEC |
60627 Edition 3.0 2013-07 |
Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids |
| 12/23/2024 |
Radiology |
12-366 |
Complete |
IEC |
61223-3-6 Edition 1.0 2020-02 |
Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation |
| 12/23/2024 |
Software/
Informatics |
13-140 |
Complete |
FIRST |
CVSS v4.0 |
Common Vulnerability Scoring System version 4.0 |
| 12/23/2024 |
Software/
Informatics |
13-141 |
Complete |
ISO IEEE |
11073-10701 First Edition, 2024-09 |
Health informatics - Device interoperability Part 10701: Point-of-care medical device communication - Metric provisioning by participants in a Service-oriented Device Connectivity (SDC) system |
| IEEE |
11073-10701-2022 |
IEEE Standard for Health Informatics - Device Interoperability - Part 10701: Point-of-Care Medical Device Communication - Metric Provisioning by Participants in a Service-Oriented Device Connectivity (SDC) System |
| 12/23/2024 |
Sterility |
14-606 |
Complete |
ANSI AAMI |
ST24:2024 |
General-purpose ethylene oxide sterilizers with automated process control and ethylene oxide sterilant sources intended for use in health care facilities
|
| 12/23/2024 |
Sterility |
14-607 |
Complete |
ANSI AAMI |
ST58:2024 |
Chemical sterilization and high-level disinfection in health care facilities |
| 12/23/2024 |
Sterility |
14-608 |
Complete |
AAMI |
TIR106:2024 |
Microbiological methods - Understanding and use of product bioburden data |
| 12/23/2024 |
Sterility |
14-609 |
Complete |
AAMI |
TIR17:2024 |
Compatibility of materials subjected to sterilization |
| 10/07/2024 |
Anesthesiology |
1-180 |
Complete |
NFPA |
99:2024 |
Health Care Facilities Code |
| 10/07/2024 |
Anesthesiology |
1-181 |
Complete |
ASME |
PVHO-1-2023 |
Safety Standard for Pressure Vessels for Human Occupancy |
| 09/09/2024 |
Sterility |
14-460 |
Complete |
ISO |
11140-1 Third edition 2014-11-01 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| ANSI AAMI ISO |
11140-1:2014 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| 09/09/2024 |
Sterility |
14-604 |
Complete |
ISO |
11737-3 First Edition 2023-06 |
Sterilization of health care products - Microbiological methods - Part 3: Bacterial endotoxin testing |
| 09/09/2024 |
Sterility |
14-605 |
Complete |
ISO |
13004 First edition 2022-10 |
Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD |
| ANSI AAMI ISO |
13004:2022 |
Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD |
| 05/29/2024 |
Anesthesiology |
1-167 |
Complete |
CGA |
V-5:2019 |
Diameter-Index Safety System (Noninterchangeable Low Pressure Connections for Medical Gas Applications) |
| 05/29/2024 |
Anesthesiology |
1-168 |
Complete |
CGA |
V-7.1:2021 |
Standard Method of Determining Cylinder Valve Outlet Connections for Medical Gases |
| 05/29/2024 |
Anesthesiology |
1-169 |
Complete |
CGA |
V-1:2021 |
Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connection |
| 05/29/2024 |
Anesthesiology |
1-170 |
Complete |
CGA |
C-9:2019 |
Standard Color Marking of Compressed Gas Containers for Medical Use |
| 05/29/2024 |
Anesthesiology |
1-171 |
Complete |
ISO |
5367 Sixth edition 2023-07 |
Anaesthetic and respiratory equipment - Breathing sets and connectors |
| 05/29/2024 |
Anesthesiology |
1-172 |
Complete |
ISO |
11712 Second edition 2023-11 |
Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors |
| 05/29/2024 |
Anesthesiology |
1-173 |
Partial |
ISO |
18562-1 Second edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process |
| 05/29/2024 |
Anesthesiology |
1-174 |
Complete |
ISO |
18562-2 Second edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |
| 05/29/2024 |
Anesthesiology |
1-175 |
Complete |
ISO |
18562-3 Second Edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds |
| 05/29/2024 |
Anesthesiology |
1-176 |
Complete |
ISO |
18562-4 Second Edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate |
| 05/29/2024 |
Anesthesiology |
1-177 |
Complete |
ISO |
80601-2-74 Second edition 2021-07 |
Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
| 05/29/2024 |
Anesthesiology |
1-178 |
Complete |
ISO |
23747 Second edition 2015-08 |
Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
| 05/29/2024 |
Anesthesiology |
1-179 |
Partial |
ISO |
26782 First edition 2009-07 |
Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans [Including: Technical Corrigendum 1 (2009)] |
| 05/29/2024 |
Cardiovascular |
3-191 |
Complete |
ISO |
18242 First edition 2016-09-01 [Including AMD1:2023] |
Cardiovascular implants and extracorporeal systems - Centrifugal blood pumps [Including AMENDMENT 1 (2023)] |
| 05/29/2024 |
Cardiovascular |
3-192 |
Complete |
ISO |
22679 First edition 2021-11 |
Cardiovascular implants - Transcatheter cardiac occluders
|
| 05/29/2024 |
Dental/
ENT |
4-325 |
Complete |
ANSI ADA |
Standard No. 96-2020 |
Dental Water-based Cements |
| 05/29/2024 |
Dental/
ENT |
4-326 |
Complete |
ISO |
9687 Second edition 2015-02 |
Dentistry - Graphical symbols for dental equipment [Including AMENDMENT 1 (2018)] |
| 05/29/2024 |
Dental/
ENT |
4-327 |
Complete |
ISO |
21531 First edition 2009-02 |
Dentistry - Graphical symbols for dental instruments |
| 05/29/2024 |
General I (QS/
RM) |
5-142 |
Complete |
ISO |
780 Fifth edition 2015-12-01 |
Packaging - Distribution packaging - Graphical symbols for handling and storage of packages |
| 05/29/2024 |
General II (ES/
EMC) |
19-50 |
Partial |
IEC |
TS 60601-4-2 Edition 1.0 2024-03 |
Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-498 |
Complete |
ISO |
10555-4 Third edition 2023-11 |
Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-499 |
Complete |
ISO |
10555-1 Third edition 2023-11 |
Intravascular catheters - Sterile and single-use intravascular catheters - Part 1: General requirements |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-500 |
Complete |
IEC |
63045 Edition 1.0 2020-05 |
Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-501 |
Complete |
ISO |
15747 Third edition 2018-09 |
Plastic containers for intravenous injections |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
