|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 05/30/2022 |
Anesthesiology |
1-152 |
Complete |
ISO |
80601-2-87 First edition 2021-04 |
Medical electrical equipment - Part 2-87: Particular requirements for basic safety and essential performance of high-frequency ventilators |
| 05/30/2022 |
General II (ES/
EMC) |
19-46 |
Complete |
ANSI AAMI |
ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD) [Including Amendment 2 (2021)] |
| 12/20/2021 |
Materials |
8-577 |
Complete |
ISO |
13179-1 Second Edition 2021-09 |
Implants for surgery -- Coatings on metallic surgical implants -- Part 1: Plasma-sprayed coatings derived from titanium or titanium-6 aluminum-4 vanadium alloy powders |
| 12/20/2021 |
Cardiovascular |
3-176 |
Complete |
ISO |
18193 First edition 2021-08 |
Cardiovascular implants and artificial organs - Cannulae for extracorporeal circulation |
| 05/30/2022 |
Cardiovascular |
3-181 |
Complete |
ISO |
25539-2 Third edition 2020-09 |
Cardiovascular implants - Endovascular devices - Part 2: Vascular stents |
| 12/20/2021 |
Sterility |
14-568 |
Complete |
USP-NF |
M98800_01_01 |
<61> Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests |
| 12/20/2021 |
Sterility |
14-569 |
Complete |
USP-NF |
M98810_01_01 |
<71> Sterility Tests |
| 12/20/2021 |
Sterility |
14-570 |
Complete |
USP-NF |
M98830_02_01 |
<85> Bacterial Endotoxins Test |
| 05/29/2023 |
Dental/
ENT |
4-299 |
Complete |
ISO |
3107 Fifth edition 2022-09 |
Dentistry - Zinc oxide-eugenol cements and non-eugenol zinc oxide cements |
| ANSI ADA |
Standard No. 30-2023 |
Dental - Zinc Oxide-eugenol Cements and Non-eugenol Zinc Oxide Cements |
| 04/03/2023 |
General II (ES/
EMC) |
19-34 |
Complete |
IEC |
61010-1 Edition 3.1 2017-01 CONSOLIDATED VERSION |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements [Including: Corrigendum 1 (2019)]
- Note: This standard is recognized with relevant US national differences applied, see reference #1 in Relevant FDA Guidance and/or Supportive Publication section |
| 12/20/2021 |
Materials |
8-565 |
Complete |
ASTM |
F2754/F2754M-21 |
Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire |
| 05/29/2023 |
Dental/
ENT |
4-300 |
Complete |
ISO |
22674 Third edition 2022-08 |
Dentistry - Metallic materials for fixed and removable restorations and appliances |
| ANSI ADA |
Standard No. 134-2023 |
Dentistry - Metallic Materials for Fixed and Removable Restorations and Appliances |
| 12/23/2016 |
Materials |
8-441 |
Complete |
ASTM |
F3109-16 |
Standard Test Method for Verification of Multi-Axis Force Measuring Platforms |
| 12/20/2021 |
Materials |
8-572 |
Complete |
ASTM |
F2565-21 |
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
| 05/30/2022 |
Materials |
8-592 |
Complete |
ASTM |
F3384-21 |
Standard Specification for Polydioxanone Polymer Resins for Surgical Implants |
| 12/19/2022 |
Physical Medicine |
16-233 |
Complete |
ISO |
16840-10 Second edition 2021-06 Corrected version 2022-01 |
Wheelchair seating - Part 10: Resistance to ignition of postural support devices - Requirements and test method |
| 12/19/2022 |
Nanotechnology |
18-21 |
Complete |
ISO |
TS 80004-6 Second edition 2021-03 |
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization |
| 12/19/2022 |
Nanotechnology |
18-22 |
Complete |
ISO |
17200 First edition 2020-09 |
Nanotechnology - Nanoparticles in powder form - Characteristics and measurements |
| 12/21/2020 |
Sterility |
14-553 |
Complete |
ASTM |
F2097-20 |
Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
| 12/23/2019 |
Cardiovascular |
3-161 |
Complete |
ISO |
14117 Second edition 2019-09 |
Active implantable medical devices - Electromagnetic compatibility - EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices. |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-423 |
Complete |
IEC |
60601-2-6 Edition 2.1 2016-04 |
CONSOLIDATED VERSION Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
| 10/04/2004 |
InVitro Diagnostics |
7-104 |
Complete |
CLSI |
H7-A3 |
Procedure for Determining Packed Cell Volume by the Microhematocrit Method - Second Edition; Approved Standard - Third Edition. |
| 03/18/2009 |
InVitro Diagnostics |
7-71 |
Complete |
CLSI |
H15-A3 (Replaces H15-A2) |
Reference and Selected Procedures for the Quantitative Determination of Hemoglobin in Blood; Approved Standard - Third Edition |
| 10/04/2010 |
Radiology |
12-215 |
Complete |
IEC |
62494-1 Edition 1.0 (2008-08) |
Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography |
| 03/16/2012 |
InVitro Diagnostics |
7-150 |
Complete |
CLSI |
H43-A2 |
Clinical Flow Cytometry Analysis of Neoplastic Hematolymphoid Cells; Approved Guideline - Second Edition |
| 01/27/2015 |
ObGyn/
Gastroenterology/
Urology |
9-45 |
Complete |
ASTM |
F2528-06(2023) |
Standard Test Methods for Enteral Feeding Devices with a Retention Balloon |
| 08/06/2013 |
Software/
Informatics |
13-62 |
Complete |
IEC |
TR 62443-3-1 Edition 1.0 2009-07 |
Industrial communication networks - Network and system security - Part 3-1: Security technologies for industrial automation and control systems |
| 12/19/2022 |
Anesthesiology |
1-157 |
Complete |
ISO |
10079-1 Fourth edition 2022-03 |
Medical suction equipment - Part 1: Electrically powered suction equipment |
| 12/19/2022 |
Anesthesiology |
1-158 |
Complete |
ISO |
10079-4 First edition 2021-08 |
Medical suction equipment - Part 4: General requirements |
| 12/19/2022 |
Biocompatibility |
2-289 |
Complete |
ISO |
10993-12 Fifth edition 2021-01 |
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials |
| 01/14/2019 |
Materials |
8-482 |
Complete |
ASTM |
D1505-18 |
Standard Test Method for Density of Plastics by the Density-Gradient Technique |
| 04/04/2016 |
Materials |
8-399 |
Complete |
ASTM |
F90-14 |
Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| 08/21/2017 |
Tissue Engineering |
15-49 |
Complete |
ASTM |
F2027-16 |
Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| 12/23/2016 |
Materials |
8-368 |
Complete |
ASTM |
F2625-10 (Reapproved 2016) |
Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry |
| 04/04/2016 |
Radiology |
12-196 |
Complete |
NEMA |
MS 2-2008 (R2020) |
Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images |
| 04/04/2016 |
Physical Medicine |
16-195 |
Complete |
ISO |
7176-1 Third edition 2014-10-01 |
Wheelchairs - Part 1: Determination of static stability |
| 03/16/2012 |
Anesthesiology |
1-73 |
Complete |
ISO |
10651-4 First edition 2002-03-01 |
Lung ventilators - Part 4: Particular requirements for operator powered resuscitators |
| 12/23/2016 |
Anesthesiology |
1-118 |
Complete |
ISO |
5361 Third edition 2016-09-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| 12/18/2023 |
Sterility |
14-589 |
Complete |
ISO |
14644-4 Second edition 2022-11 |
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-145 |
Complete |
ASTM |
D7661-18 |
Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-146 |
Complete |
ISO |
8600-4 Third Edition 2023-01 |
Endoscopes - Medical endoscopes and certain accessories - Part 4: Determination of maximum width of insertion portion |
| 08/21/2017 |
Materials |
8-451 |
Complete |
ASTM |
F2214-16 |
Standard Test Methods for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 01/27/2015 |
Software/
Informatics |
13-70 |
Complete |
ANSI AAMI IEC |
TIR80001-2-5:2014 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
| IEC |
TR 80001-2-5 Edition 1.0 2014-12 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
| 08/06/2013 |
Sterility |
14-381 |
Complete |
ISO ASTM |
51261 Second edition 2013-04-15 |
Practice for calibration of routine dosimetry systems for radiation processing |
| 07/09/2014 |
Tissue Engineering |
15-40 |
Complete |
ASTM |
F2211-13 |
Standard Classification for Tissue Engineered Medical Products (TEMPs) |
| 08/06/2013 |
Software/
Informatics |
13-40 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-1 2012 |
Application of risk management for IT-networks incorporating medical devices - Part 2-1: Step-by-step risk management of medical IT-networks; Practical applications and examples |
| IEC |
TR 80001-2-1 Edition 1.0 2012-07 |
Application of risk management for IT- networks incorporating medical devices - Part 2-1: Step-by-step risk management of medical IT-networks - Practical applications and examples |
| 05/30/2022 |
Cardiovascular |
3-182 |
Complete |
ASTM |
F3036-21 |
Standard Guide for Testing Absorbable Stents |
| 01/27/2015 |
Dental/
ENT |
4-219 |
Complete |
ISO |
29022 First edition 2013-06-01 |
Dentistry - Adhesive - Notched-edge sheer bond strength test |
| 01/30/2014 |
Materials |
8-344 |
Complete |
ISO |
7153-1 Second edition 1991-04-01 |
Surgical instruments -- Metallic materials -- Part 1: Stainless steel [Including: Amendment 1 (1999)] |
| 04/04/2016 |
Materials |
8-415 |
Complete |
ASTM |
F2778-09 (Reapproved 2020) |
Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR) |
| 04/04/2016 |
Materials |
8-404 |
Complete |
ASTM |
E647-15 |
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
| 03/16/2012 |
Anesthesiology |
1-62 |
Complete |
ISO |
5356-1 Third edition 2004-05-15 |
Anaesthetic and respiratory equipment - Conical connectors: Part 1: Cones and sockets |
| ANSI AAMI ISO |
5356-1:2004 |
Anaesthetic and Respiratory Equipment - Conical Connectors - Part 1: Cones and Sockets |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-200 |
Complete |
ASTM |
E1061-01(2022) |
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
| 08/06/2013 |
Software/
Informatics |
13-57 |
Complete |
ISO IEEE |
11073-10407 First edition 2010-05-01 |
Health informatics - Personal health device communication - Part 10407: Device Specialization - Blood pressure monitor |
| IEEE |
Std 11073-10407-2008 |
Health informatics - Personal health device communication - Part 10407: Device Specialization - Blood pressure monitor |
| 12/20/2021 |
Sterility |
14-571 |
Complete |
ISO |
11138-8 First edition 2021-07 |
Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator |
| 05/30/2022 |
Materials |
8-589 |
Complete |
ASTM |
F1925-22 |
Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-404 |
Complete |
ISO |
7886-1 Second edition 2017-05 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use |
| 07/15/2019 |
Tissue Engineering |
15-57 |
Complete |
ASTM |
F2315-18 |
Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels |
| 09/17/2018 |
Materials |
8-475 |
Complete |
ASTM |
F2026-17 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 04/04/2016 |
Dental/
ENT |
4-221 |
Complete |
ISO |
7494-2 Second edition 2015-04-01 |
Dentistry - Dental units - Part 2: Air, water, suction and waste water systems |
| 12/19/2022 |
General II (ES/
EMC) |
19-48 |
Complete |
IEEE ANSI |
USEMCSC C63.27-2021 |
American National Standard for Evaluation of Wireless Coexistence |
| 12/19/2022 |
InVitro Diagnostics |
7-313 |
Complete |
CLSI |
EP27 2nd Edition |
Constructing and Interpreting an Error Grid for Quantitative Measurement Procedures |
| 12/19/2022 |
ObGyn/
Gastroenterology/
Urology |
9-142 |
Complete |
ASTM |
D1894-14 |
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| 09/17/2018 |
Materials |
8-112 |
Complete |
ASTM |
F1044-05 (Reapproved 2017)e1 |
Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| 09/17/2018 |
Orthopedic |
11-322 |
Complete |
ASTM |
F1541-17 |
Standard Specification and Test Methods for External Skeletal Fixation Devices |
| 06/07/2018 |
Biocompatibility |
2-249 |
Complete |
ISO |
10993-16 Third edition 2017-05 |
Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables |
| 12/23/2019 |
Materials |
8-484 |
Complete |
ASTM |
F2066-18 |
Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| 06/07/2021 |
Radiology |
12-335 |
Complete |
IEC |
60336 Edition 5.0 2020-12 |
Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics [Including: Corrigendum 1 (2022)] |
| 05/29/2024 |
Software/
Informatics |
13-132 |
Complete |
ISO IEEE |
11073-10408 Second edition 2022-12 |
Health informatics - Point-of-care medical device communication - Part 10408: Device specialization - Thermometer |
| IEEE |
Std 11073-10408-2019 |
Health informatics - Point-of-care medical device communication - Part 10408: Device specialization - Thermometer |
| 05/30/2022 |
Radiology |
12-343 |
Complete |
IEC |
62127-1 Edition 2.0 2022-03 |
Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields |
| 01/14/2019 |
Dental/
ENT |
4-171 |
Complete |
ANSI ASA |
S3.37-1987 (Reaffirmed 2025) |
American National Standard Preferred Earhook Nozzle Thread for Postauricular Hearing Aids |
| 07/15/2019 |
Orthopedic |
11-352 |
Complete |
ISO |
14242-1 Third edition 2014-10-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test [Including AMENDMENT 1 (2018)] |
| 01/14/2019 |
Dental/
ENT |
4-217 |
Complete |
ANSI ASA |
S3.36-2012 (Reaffirmed 2022) |
American National Standard Specification for a Manikin for Simulated in-situ Airborne Acoustic Measurements |
| 12/20/2021 |
Orthopedic |
11-393 |
Complete |
ASTM |
F2724-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
| 09/17/2018 |
Orthopedic |
11-340 |
Complete |
ASTM |
F3018-17 |
Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices |
| 09/17/2018 |
Orthopedic |
11-336 |
Complete |
ISO |
17853 Third edition 2011-03-01 |
Wear of implant materials - Polymer and metal wear particles - Isolation and characterization |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-147 |
Complete |
ASTM |
D6978-05(2023) |
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
| 12/18/2023 |
InVitro Diagnostics |
7-319 |
Complete |
CLSI |
M23 6th Edition |
Development of In Vitro Susceptibility Test Methods, Breakpoints, and Quality Control Parameters |
| 10/09/2023 |
Software/
Informatics |
13-129 |
Complete |
ISO IEC IEEE |
29119-1 Second edition 2022-01 |
Software and systems engineering - Software testing - Part 1: General concepts |
| 07/26/2016 |
Biocompatibility |
2-222 |
Complete |
ISO |
10993-2 Second edition 2006-07-15 |
Biological Evaluation of medical devices - Part 2: Animal welfare requirements |
| ANSI AAMI ISO |
10993-2:2006/(R)2014 |
Biological Evaluation of medical devices - Part 2: Animal welfare requirements |
| 06/07/2021 |
Ophthalmic |
10-126 |
Complete |
IEC |
80601-2-58 Edition 2.0 2014-09 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
| ANSI AAMI IEC |
80601-2-58:2014 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
| 05/29/2024 |
Radiology |
12-357 |
Complete |
IEC |
63145-20-10 Edition 1.0 2019-08 |
Eyewear display - Part 20-10: Fundamental measurement methods - Optical properties |
| 05/29/2024 |
Radiology |
12-358 |
Complete |
IEC |
63145-20-20 Edition 1.0 2019-09 |
Eyewear display - Part 20-20: Fundamental measurement methods - Image quality |
| 05/29/2024 |
Radiology |
12-359 |
Complete |
IEC |
63145-22-10 Edition 1.0 2020-01 |
Eyewear display - Part 22-10: Specific measurement methods for AR type - Optical properties |
| 05/29/2024 |
Dental/
ENT |
4-325 |
Complete |
ANSI ADA |
Standard No. 96-2020 |
Dental Water-based Cements |
| 08/21/2017 |
Orthopedic |
11-269 |
Complete |
ASTM |
F2423-11 (Reapproved 2020) |
Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses |
| 05/30/2022 |
InVitro Diagnostics |
7-312 |
Complete |
CLSI |
M39 5th Edition |
Analysis and Presentation of Cumulative Antimicrobial Susceptibility Test Data |
| 05/29/2024 |
Software/
Informatics |
13-133 |
Complete |
ISO IEEE |
11073-10415 Second edition 2022-12 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| IEEE |
Std 11073-10415-2019 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| 08/06/2013 |
Software/
Informatics |
13-53 |
Complete |
ISO IEEE |
11073-10415 First edition 2010-05-01 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-382 |
Complete |
ISO |
11608-7 First edition 2016-08-01 |
Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment |
| 08/21/2017 |
Materials |
8-195 |
Complete |
ASTM |
F2024-10 (Reapproved 2016) |
Standard Practice for X-Ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings |
| 12/20/2021 |
Orthopedic |
11-387 |
Complete |
ASTM |
F1781-21 |
Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants |
| 01/30/2014 |
Sterility |
14-401 |
Complete |
ASTM |
F2217/F2217M-13 (Reapproved 2023) |
Standard Practice for Coating/Adhesive Weight Determination |
| 12/18/2023 |
Anesthesiology |
1-166 |
Complete |
ISO |
11195 Second edition 2018-01 |
Gas mixers for medical use - Stand-alone gas mixers |
| 07/06/2020 |
Software/
Informatics |
13-113 |
Complete |
IEEE |
Std 11073-20601-2019 |
Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol. |
| 05/29/2024 |
Sterility |
14-602 |
Complete |
AAMI |
TIR12:2020/(R)2023 |
Designing, testing, and labeling medical devices intended for processing by health care facilities: A guide for device manufacturers |
| 12/18/2023 |
Dental/
ENT |
4-314 |
Complete |
ISO |
7494-2 Third edition 2022-07 |
Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems |
| 12/18/2023 |
Sterility |
14-595 |
Complete |
ISO |
11607-2 Second edition 2019-02 [Including AMD1:2023] |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes [Including Amendment 1 (2023)]. |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-272 |
Complete |
ASTM |
F2062-00 (Reapproved 2018) |
Standard Specification for Square Drive Interconnections on Surgical Instruments |
| 01/30/2014 |
Neurology |
17-12 |
Complete |
ISO |
7197 Third edition 2006-06-01 |
Neurosurgical Implants - Sterile, single-use hydrocephalus shunts and components [Including: Technical Corrigendum 1 (2007)] |
| 09/17/2018 |
Dental/
ENT |
4-247 |
Complete |
ISO |
28319 Second edition 2018-04 |
Dentistry - Laser welding and filler materials |
| ANSI ADA |
Standard No. 84-2020 |
Laser Welding and Filler Materials in Dentistry |
| 12/23/2024 |
Dental/
ENT |
4-338 |
Complete |
ISO |
22683 First edition 2022-05 |
Dentistry - Rotational adaptability test between implant body and implant abutment in dental implant systems |
| 05/29/2024 |
Materials |
8-611 |
Complete |
ISO |
9584 Second edition 2023-10 |
Implants for surgery - Non-destructive testing - Radiographic examination of cast metallic surgical implants |
| 12/18/2023 |
Orthopedic |
11-406 |
Complete |
ASTM |
F3141-23 |
Standard Guide for Total Knee Replacement Loading Profiles |
| 12/19/2022 |
Cardiovascular |
3-183 |
Complete |
ISO |
11658 First edition 2012-05-15 |
Cardiovascular implants and extracorporeal systems - Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| ANSI AAMI ISO |
11658: 2012 |
Cardiovascular implants and extracorporeal systems - Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| 12/19/2022 |
Orthopedic |
11-394 |
Complete |
ASTM |
F1820-22 |
Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices |
| 05/30/2022 |
Radiology |
12-345 |
Complete |
IEC |
61223-3-7 Edition 1.0 2021-12 |
Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-185 |
Complete |
ASTM |
F881-94 (Reapproved 2022) |
Standard Specification for Silicone Elastomer Facial Implants |
| 01/30/2014 |
General I (QS/
RM) |
5-84 |
Complete |
AAMI |
TIR 49:2013/(R)2020 |
Technical Information Report Design of training and instructional materials for medical devices used in non-clinical environments |
| 04/04/2016 |
Materials |
8-403 |
Complete |
ASTM |
D638-14 |
Standard Test Method for Tensile Properties of Plastics |
| 05/26/2025 |
Radiology |
12-374 |
Complete |
ISO |
24013 Second edition 2023-06 |
Optics and photonics -- Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation |
| 09/17/2018 |
Orthopedic |
11-335 |
Complete |
ASTM |
F3141-17a |
Standard Guide for Total Knee Replacement Loading Profiles |
| 05/29/2023 |
Materials |
8-602 |
Complete |
ASTM |
F2503-23 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 07/06/2020 |
Materials |
8-528 |
Complete |
ASTM |
F2503-20 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 09/17/2018 |
Dental/
ENT |
4-244 |
Complete |
ISO |
8325 Second edition 2004-09-15 |
Dentistry - Test methods for rotary instruments |
| 01/14/2019 |
Nanotechnology |
18-5 |
Complete |
ASTM |
E2859-11 (Reapproved 2017) |
Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
| 05/26/2025 |
InVitro Diagnostics |
7-340 |
Complete |
CLSI |
LIS01-A2 |
Standard Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems - Second Edition. |
| 05/26/2025 |
Radiology |
12-369 |
Complete |
ISO |
11146-1 Second edition 2021-07 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| 12/18/2023 |
Orthopedic |
11-407 |
Complete |
ASTM |
F3140-23 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
| 12/18/2023 |
Anesthesiology |
1-163 |
Complete |
ISO |
80601-2-72 Second edition 2023-06 |
Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 12/19/2022 |
Orthopedic |
11-395 |
Complete |
ASTM |
F1814-22 |
Standard Guide for Evaluating Modular Hip and Knee Joint Components |
| 12/19/2022 |
Orthopedic |
11-396 |
Complete |
ISO |
7206-13 First edition 2016-07-01 [Including AMD1:2022] |
Implants for surgery - Partial and total hip joint prostheses - Part 13: Determination of resistance to torque of head fixation of stemmed femoral components [Including AMENDMENT 1 (2022)] |
| 12/20/2021 |
Dental/
ENT |
4-292 |
Complete |
ISO |
28888 First edition 2013-10 |
Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues |
| ANSI ADA |
Standard No. 151-2015 (R2020) |
Screening Method for Erosion Potential of Oral Rinses on Dental Hard Tissues |
| 12/20/2021 |
Cardiovascular |
3-180 |
Complete |
ASTM |
F3505-21 |
Standard Test Method for Stent and Endovascular Prosthesis Kink Resistance |
| 07/09/2014 |
Dental/
ENT |
4-160 |
Complete |
ANSI ASA |
S3.1-1999 (Reaffirmed 2023) |
American National Standard Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms |
| 08/06/2013 |
Dental/
ENT |
4-204 |
Complete |
ANSI ASA |
S3.42-2012/Part 2/ IEC 60118-15:2012 (R2025) |
American National Standard Testing Hearing Aids - Part 2: Methods for characterizing signal processing in hearing aids with a speech-like signal (a nationally adopted international standard) |
| 05/26/2025 |
InVitro Diagnostics |
7-345 |
Complete |
CLSI |
AUTO13-A2 (Formerly GP19-A2) |
Laboratory Instruments and Data Management Systems: Design of Software User Interfaces and End-User Software Systems Validation, Operation, and Monitoring; Approved Guideline - Second Edition |
| 12/19/2022 |
General I (QS/
RM) |
5-135 |
Complete |
ISO |
20417 First edition 2021-04 Corrected version 2021-12 |
Medical devices - Information to be supplied by the manufacturer |
| 12/19/2022 |
General I (QS/
RM) |
5-138 |
Complete |
AAMI |
TIR66: 2017/(R)2025 |
Guidance for the creation of physiologic data and waveform databases to demonstrate reasonable assurance of the safety and effectiveness of alarm system algorithms |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-480 |
Complete |
ISO |
11608-6:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 6: On-body delivery |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-481 |
Complete |
ANSI AAMI |
CN27:2021 |
General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications |
| 01/14/2019 |
Orthopedic |
11-346 |
Complete |
ASTM |
F2706-18 |
Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model |
| 04/04/2016 |
Tissue Engineering |
15-24 |
Complete |
ASTM |
F2721-09 (Reapproved 2014) |
Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-491 |
Complete |
ASTM |
F1670/F1670M-17a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 12/18/2023 |
Dental/
ENT |
4-309 |
Complete |
ISO |
6877 Third edition 2021-09 |
Dentistry - Endodontic obturating materials |
| ANSI ADA |
Standard No. 78-2022 |
Dentistry - Endodontic Obturating Materials |
| 07/26/2016 |
Biocompatibility |
2-213 |
Complete |
ASTM |
F1904-14 |
Standard Practice for Testing the Biological Responses to Particles In Vivo |
| 05/29/2024 |
Sterility |
14-598 |
Complete |
ISO |
14644-3 Second edition 2020-06 |
Cleanrooms and associated controlled environments - Part 3: Test methods |
| 05/29/2023 |
Orthopedic |
11-399 |
Complete |
ASTM |
F1357-23 |
Standard Specification for Articulating Total Wrist Implants |
| 12/23/2016 |
General II (ES/
EMC) |
19-20 |
Complete |
IEEE ANSI |
C63.16-2016 (Revision of ANSI C63.16-1993) |
American National Standard Guide for Electrostatic Discharge Test Methodologies and Acceptance Criteria for Electronic Equipment |
| 08/06/2013 |
Software/
Informatics |
13-59 |
Complete |
ISO IEC IEEE |
15026-4 First edition 2021-10-01 |
Systems and software engineering - Systems and software assurance - Part 4: Assurance in the life cycle |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-148 |
Complete |
ISO CIE |
11664-6 Second edition 2022-08 |
Colorimetry - Part 6: CIEDE2000 colour-difference formula |
| 12/18/2023 |
Dental/
ENT |
4-318 |
Complete |
ISO |
20749 Second edition 2023-06 |
Dentistry - Pre-capsulated dental amalgam |
| 09/17/2018 |
Dental/
ENT |
4-246 |
Complete |
ISO |
20749 First edition 2017-03 |
Dentistry - Pre-capsulated dental amalgam |
| ANSI ADA |
Standard No. 144-2018 |
Alloy for Dental Amalgam |
| 01/14/2019 |
Tissue Engineering |
15-47 |
Complete |
ISO |
22442-3 First edition 2007-12-15 |
Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) Agents. |
| 08/21/2017 |
General II (ES/
EMC) |
19-25 |
Complete |
IEC |
62485-1 Edition 1.0 2015-04 |
Safety requirements for secondary batteries and battery installations - Part 1: General safety information. |
| 12/23/2019 |
Radiology |
12-329 |
Complete |
IEC |
60601-2-43 Edition 2.2 2019-10 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
| 12/23/2024 |
Anesthesiology |
1-183 |
Complete |
ASTM |
G175-24 |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 12/18/2023 |
Orthopedic |
11-408 |
Complete |
ASTM |
F2777-23 |
Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
| 12/18/2023 |
Orthopedic |
11-409 |
Complete |
ASTM |
F3495-23 |
Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components |
| 01/14/2019 |
Tissue Engineering |
15-56 |
Complete |
ASTM |
F3224-17 |
Standard Test Method for Evaluating Growth of Engineered Cartilage Tissue using Magnetic Resonance Imaging |
| 08/21/2017 |
Biocompatibility |
2-247 |
Complete |
ISO |
10993-6 Third edition 2016-12-01 |
Biological evaluation of medical devices -- Part 6: Tests for local effects after implantation |
| 07/15/2019 |
Anesthesiology |
1-126 |
Complete |
ISO |
11712 First edition 2009-05-15 |
Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors |
| 12/20/2021 |
Radiology |
12-341 |
Complete |
IEC |
62563-1 Edition 1.2 2021-07 CONSOLIDATED VERSION |
Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods |
| 12/19/2022 |
General I (QS/
RM) |
5-139 |
Complete |
ISO |
18250-3 First edition 2018-06 |
Medical devices - Connectors for reservoir delivery systems for healthcare applications - Part 3: Enteral application |
| 12/20/2021 |
Physical Medicine |
16-232 |
Complete |
IEC |
80601-2-78 Edition 1.0 2019-07 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation |
| 05/30/2022 |
Materials |
8-588 |
Complete |
ASTM |
F560-22 |
Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
| 08/06/2013 |
Software/
Informatics |
13-61 |
Complete |
IEC |
62443-2-1 Edition 1.0 2010-11 |
Industrial communication networks - Network and system security - Part 2-1: Establishing an industrial automation and control system security program |
| 01/14/2019 |
Anesthesiology |
1-117 |
Complete |
ISO |
5366 First edition 2016-10-01 |
Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors |
| 01/14/2019 |
Anesthesiology |
1-138 |
Complete |
ISO |
80601-2-74 First edition 2017-05 |
Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
| 12/20/2021 |
Cardiovascular |
3-173 |
Complete |
ISO |
5840-3 Second edition 2021-01 |
Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-477 |
Complete |
ISO |
11608-3:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-475 |
Complete |
ISO |
11608-4:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics |
| 01/14/2019 |
Dental/
ENT |
4-254 |
Complete |
ANSI ADA |
Standard No. 99-2001 (R2023) |
Athletic Mouth Protectors and Materials |
| 01/30/2014 |
Software/
Informatics |
13-63 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-4:2012 |
Application of risk management for IT-networks incorporating medical devices - Part 2-4: General implementation guidance for healthcare delivery organizations |
| IEC |
TR 80001-2-4 Edition 1.0 2012-11 |
Application of risk management for IT-networks incorporating medical devices -- Part 2-4: Application guidance - General implementation guidance for healthcare delivery organization |
| 08/21/2017 |
Software/
Informatics |
13-97 |
Complete |
IEC |
82304-1 Edition 1.0 2016-10 |
Health software - Part 1: General requirements for product safety |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-410 |
Complete |
ISO |
8536-6 Third edition 2016-12-01 |
Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles |
| 05/29/2024 |
Anesthesiology |
1-174 |
Complete |
ISO |
18562-2 Second edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |
| 12/23/2016 |
Biocompatibility |
2-94 |
Complete |
ASTM |
F981-04 (Reapproved 2016) |
Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone |
| 12/20/2021 |
Orthopedic |
11-389 |
Complete |
ISO |
7206-10 Second edition 2018-08 |
Implants for surgery - Partial and total hip-joint prostheses - Part 10: Determination of resistance to static load of modular femoral heads [Including AMENDMENT 1 (2021)] |
| 05/29/2023 |
Materials |
8-597 |
Complete |
ASTM |
F2003-02(2022) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
| 12/20/2021 |
Orthopedic |
11-390 |
Complete |
ISO |
23089-2 First edition 2021-05 |
Implants for surgery - Preclinical mechanical assessment of spinal implants and particular requirements - Part 2: Spinal intervertebral body fusion devices |
| 08/06/2013 |
Physical Medicine |
16-190 |
Complete |
ISO |
7176-11 Second edition 2012-12-01 |
Wheelchairs - Part 11: Test dummies |
| 08/06/2013 |
Physical Medicine |
16-192 |
Complete |
ISO |
7176-3 Third edition 2012-12-15 |
Wheelchairs - Part 3: Determination of effectiveness of brakes |
| 04/04/2016 |
Radiology |
12-288 |
Complete |
NEMA |
MS 9-2008 (R2020) |
Standards Publication Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images |
| 07/09/2014 |
InVitro Diagnostics |
7-175 |
Complete |
CLSI |
C59-A |
Apoplipoprotein Immunoassays: Development and Recommended Performance Characteristics; Approved Guideline |
| 01/30/2014 |
ObGyn/
Gastroenterology/
Urology |
9-85 |
Complete |
ASTM |
D6976-13R18 |
Standard Specification for Rubber Contraceptives - Vaginal Diaphragms |
| 07/09/2014 |
Materials |
8-377 |
Complete |
ASTM |
F136-13 |
Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| 07/09/2014 |
Orthopedic |
11-277 |
Complete |
ISO |
7206-6 Second edition 2013-11-15 |
Implants for surgery - Partial and total hip joint prostheses - Part 6: Determination of endurance properties of head and neck region of stemmed femoral components |
| 05/30/2022 |
Materials |
8-583 |
Complete |
ASTM |
F562-22 |
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| 12/20/2021 |
Materials |
8-566 |
Complete |
ASTM |
F1813-21 |
Standard Specification for Wrought Titanium - 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical Implant (UNS R58120) |
| 12/20/2021 |
Materials |
8-567 |
Complete |
ASTM |
F86-21 |
Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
| 12/20/2021 |
Materials |
8-568 |
Complete |
ASTM |
F1586-21 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium-10 Nickel-3 Manganese-2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
| 12/20/2021 |
Materials |
8-569 |
Complete |
ASTM |
F648-21 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-471 |
Complete |
USP-NF |
M88880_05_01 |
Sterile Water for Irrigation |
| 12/23/2016 |
InVitro Diagnostics |
7-267 |
Complete |
CLSI |
C24 4th Edition (Replaces C24-A3) |
Statistical Quality Control for Quantitative Measurement Procedures: Principles and Definitions |
| 05/30/2022 |
Materials |
8-584 |
Complete |
ASTM |
F2146-22 |
Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| 01/14/2019 |
InVitro Diagnostics |
7-139 |
Complete |
CLSI |
QMS24, 3rd Edition September 2016 Replaces GP27-A2 and GP29-A2 |
Using Proficiency Testing to Improve the Clinical Laboratory; Approved Guideline - Second Edition |
| 07/06/2020 |
Materials |
8-532 |
Complete |
ASTM |
F3335-20 |
Standard Guide for Assessing the Removal of Additive Manufacturing Residues in Medical Devices Fabricated by Powder Bed Fusion |
| 07/06/2020 |
Materials |
8-533 |
Complete |
ISO ASTM |
52907: First Edition 2019-11 |
Additive Manufacturing - Feedstock materials - Methods to characterize metal powders |
| 05/29/2024 |
Materials |
8-614 |
Complete |
ASTM |
F3456-22 |
Standard Guide for Powder Reuse Schema in Powder Bed Fusion Processes for Medical Applications for Additive Manufacturing Feedstock Materials |
| 12/18/2023 |
Anesthesiology |
1-164 |
Complete |
ISO |
5361 Fourth edition 2023-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| 05/29/2023 |
Sterility |
14-587 |
Complete |
AAMI |
TIR104:2022 |
Guidance on transferring health care products between radiation sterilization sources |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-493 |
Complete |
ASTM |
F2101-23 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
| 04/04/2016 |
Radiology |
12-188 |
Complete |
NEMA |
MS-1-2008 (R2020) |
Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging |
| 04/04/2016 |
Radiology |
12-187 |
Complete |
NEMA |
MS 3-2008 (R2020) |
Determination of Image Uniformity in Diagnostic Magnetic Resonance Images |
| 12/23/2016 |
Materials |
8-440 |
Complete |
ASTM |
F3091/F3091M-14 |
Standard Specification for Powder Bed Fusion of Plastic Materials |
| 08/21/2017 |
Materials |
8-226 |
Complete |
ASTM |
F603-12 (Reapproved 2020) |
Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application |
| 12/04/2017 |
Radiology |
12-307 |
Complete |
AAMI |
RT2:2017 |
Radiation therapy readiness check |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-464 |
Complete |
ISO |
11040-4 Third edition 2015-04-01 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling [Including AMENDMENT 1 (2020)] |
| 01/14/2019 |
Biocompatibility |
2-145 |
Complete |
ASTM |
F1439-03 (Reapproved 2018) |
Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-486 |
Complete |
ISO |
10535 Third edition 2021-10 |
Assistive products - Hoists for the transfer of disabled persons - Requirements and test methods |
| 12/18/2023 |
Dental/
ENT |
4-321 |
Complete |
ISO |
23450 First edition 2021-03 |
Dentistry - Intraoral camera |
| 12/18/2023 |
Dental/
ENT |
4-322 |
Complete |
ISO |
18675 First edition 2022-05 |
Dentistry - Machinable ceramic blanks |
| 12/18/2023 |
Dental/
ENT |
4-323 |
Complete |
ISO |
5139 First edition 2023-05 |
Dentistry - Polymer-based composite machinable blanks |
| 12/18/2023 |
Dental/
ENT |
4-324 |
Complete |
ISO |
TS 16506 First edition 2017-07 Corrected version 2018-03 |
Dentistry - Polymer-based luting materials containing adhesive components |
| 07/06/2020 |
Orthopedic |
11-363 |
Complete |
ASTM |
F897-19 |
Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws |
| 12/23/2019 |
Radiology |
12-309 |
Complete |
IEC |
60601-2-28 Edition 3.0 2017-06 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
| 12/23/2019 |
Radiology |
12-327 |
Complete |
ISO |
11551 Third eidtion 2019-10 |
Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components |
| 07/06/2020 |
Tissue Engineering |
15-62 |
Complete |
ASTM |
F2602-18 |
Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) |
| 12/23/2024 |
Cardiovascular |
3-194 |
Complete |
ISO |
7199 Fourth edition 2024-09 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| 07/09/2014 |
General II (ES/
EMC) |
19-10 |
Complete |
UL |
1642 5th Edition |
Lithium Batteries |
| 07/06/2020 |
Radiology |
12-330 |
Complete |
NEMA |
Standards Publication XR 28-2018 (R2023) |
Supplemental Requirements for User Information and System Function Related to Dose in CT |
| 12/23/2019 |
Physical Medicine |
16-222 |
Complete |
RESNA ANSI |
WC-1:2019 Section 20 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 20: Determination of the Performance of Stand-up Type Wheelchairs |
| 12/23/2019 |
Physical Medicine |
16-223 |
Complete |
RESNA ANSI |
WC-1:2019 Section 22 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheels chairs (including Scooters) Section 22: Set-up Procedures |
| 12/23/2019 |
Physical Medicine |
16-224 |
Complete |
RESNA ANSI |
WC-2:2019 Section 21 |
American National Standard for Wheelchairs - Volume 2, Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
| 12/19/2022 |
Software/
Informatics |
13-126 |
Complete |
ANSI AAMI UL |
2800-1-2:2022 |
Standard for Interoperable Item Development Life Cycle |
| 01/14/2019 |
Nanotechnology |
18-8 |
Complete |
ASTM |
E2578-07 (Reapproved 2022) |
Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions |
| 01/14/2019 |
Nanotechnology |
18-11 |
Complete |
ISO |
TR 13121 First edition 2011-05-15 |
Nanotechnologies - Nanomaterial risk evaluation |
| 01/14/2019 |
Radiology |
12-322 |
Complete |
NEMA |
MS 5-2018 |
Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging |
| 08/06/2013 |
Software/
Informatics |
13-44 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-3:2012 |
Application of risk management for IT Networks incorporating medical devices - Part 2-3: Guidance for wireless networks |
| IEC |
TR 80001-2-3 Edition 1.0 2012-07 |
Application of risk management for IT Networks incorporating medical devices - Part 2-3: Guidance for wireless networks |
| 06/07/2018 |
Ophthalmic |
10-105 |
Complete |
ISO |
11979-8 Third edition 2017-04 |
Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements |
| 06/07/2018 |
Ophthalmic |
10-106 |
Complete |
ISO |
18369-3 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 3: Measurement Methods |
| 06/07/2018 |
Ophthalmic |
10-107 |
Complete |
ISO |
18369-4 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials |
| 01/14/2019 |
Materials |
8-488 |
Complete |
ASTM |
F3301-18a |
Standard for Additive Manufacturing - Post Processing Methods - Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion |
| 12/21/2020 |
Orthopedic |
11-372 |
Complete |
ASTM |
F2996-20 |
Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems |
| 12/23/2024 |
Software/
Informatics |
13-141 |
Complete |
ISO IEEE |
11073-10701 First Edition, 2024-09 |
Health Informatics - Device Interoperability - Part 10701: Point-of-Care Medical Device Communication - Metric Provisioning by Participants in a Service-Oriented Device Connectivity (SDC) System |
| IEEE |
Std 11073-10701-2022 |
Health informatics - Device interoperability Part 10701: Point-of-care medical device communication - Metric provisioning by participants in a Service-oriented Device Connectivity (SDC) system |
| 01/14/2019 |
General I (QS/
RM) |
5-120 |
Complete |
IEC |
60812 Edition 3.0 2018-08 |
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| 07/09/2014 |
Sterility |
14-290 |
Complete |
ANSI AAMI |
ST24:1999/(R)2018 |
Automatic, general purpose ethylene oxide sterilizers and ethylene oxide sterilant sources intended for use in health care facilities, 3ed. |
| 12/23/2024 |
InVitro Diagnostics |
7-324 |
Complete |
CLSI |
M07 12th Edition |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically |
| 01/14/2019 |
General I (QS/
RM) |
5-121 |
Complete |
ISO |
80369-1 Second edition 2018-11 |
Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-447 |
Complete |
ISO |
8536-4 Sixth edition 2019-09 |
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
| 12/23/2019 |
Materials |
8-519 |
Complete |
ISO |
13782 Second edition 2019-04 |
Implants for surgery - Metallic materials - Unalloyed tantalum for surgical implant applications |
| 12/23/2019 |
Materials |
8-520 |
Complete |
ASTM |
F799-19 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| 12/23/2024 |
Anesthesiology |
1-188 |
Complete |
ISO |
80601-2-84 Second edition 2023-11 |
Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment |
| 05/26/2025 |
Dental/
ENT |
4-343 |
Complete |
ANSI ADA |
Standard No. 105-2024 |
Elastomeric Auxiliaries for Use in Orthodontics |
| 07/09/2014 |
Materials |
8-378 |
Complete |
ASTM |
D792-13 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| 07/09/2014 |
Materials |
8-379 |
Complete |
ISO |
11542-2 First edition 1998-11-15 |
Plastics - Ultra-high-molecular-weight polyethyelene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties [Including: Technical Corrigendum 1 (2007)] |
| 08/21/2017 |
Orthopedic |
11-280 |
Complete |
ASTM |
F2624-12 (Reapproved 2020) |
Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-356 |
Complete |
ASTM |
D5712-15(2020) |
Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
| 04/04/2016 |
Orthopedic |
11-247 |
Complete |
ASTM |
F2789-10 (Reapproved 2020) |
Standard Guide for Mechanical and Functional Characterization of Nucleus Devices |
| 07/06/2020 |
Anesthesiology |
1-146 |
Complete |
ISO |
80601-2-12 Second edition 2020-02 |
Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| 07/15/2019 |
Tissue Engineering |
15-58 |
Complete |
ASTM |
F2103-18 |
Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications |
| 07/06/2020 |
Software/
Informatics |
13-115 |
Complete |
ISO IEC IEEE |
29119-1 First edition 2013-09-01 |
Software and systems engineering - Software testing - Part 1: Concepts and definitions |
| 07/15/2019 |
Biocompatibility |
2-263 |
Complete |
ASTM |
F1903-18 |
Standard Practice for Testing for Cellular Responses to Particles in vitro |
| 07/06/2020 |
Materials |
8-531 |
Complete |
ASTM |
F3321-19 |
Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices |
| 05/26/2025 |
Radiology |
12-382 |
Complete |
NEMA |
NU 2-2024 |
Performance Measurements of Positron Emission Tomographs |
| 08/14/2015 |
General I (QS/
RM) |
5-97 |
Complete |
ISO |
80369-20 First edition 2015-05-15 |
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods |
| ANSI AAMI ISO |
80369-20:2015 |
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods |
| 05/26/2025 |
Anesthesiology |
1-195 |
Complete |
ISO |
80369-2 First edition 2024-09 |
Small-bore connectors for liquids and gases in healthcare applications - Part 2: Connectors for respiratory applications |
| 07/15/2019 |
General I (QS/
RM) |
5-123 |
Complete |
ISO |
80369-3 First Edition 2016-07-01 |
Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications [Including AMENDMENT 1 (2019)]. |
| 07/15/2019 |
Biocompatibility |
2-264 |
Complete |
ASTM |
F2148-18 |
Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA). |
| 05/26/2025 |
Dental/
ENT |
4-344 |
Complete |
ANSI ADA |
Standard No. 186-2024 |
Dentistry - Polymer-based Machinable Blanks |
| 05/26/2025 |
Dental/
ENT |
4-345 |
Complete |
ANSI ADA |
Standard No. 187-2024 |
Dentistry - Dental CAD/CAM Machinable Ceramic Blanks |
| 05/26/2025 |
Dental/
ENT |
4-346 |
Complete |
ISO |
9680 Fourth edition 2021-11 |
Dentistry - Operating lights |
| ANSI ADA |
Standard No. 89-2023 |
Dentistry - Dental Operating Lights |
| 05/26/2025 |
Dental/
ENT |
4-347 |
Complete |
ISO |
22254 First edition 2005-08 |
Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection |
| 05/26/2025 |
Anesthesiology |
1-193 |
Complete |
ISO |
18190 Second edition 2025-02 |
Anaesthetic and respiratory equipment - General requirements for airways and related equipment |
| 01/14/2019 |
Anesthesiology |
1-120 |
Complete |
ISO |
18190 First edition 2016-11-01 |
Anaesthetic and respiratory equipment - General requirements for airways and related equipment |
| 08/21/2017 |
Materials |
8-428 |
Complete |
ASTM |
F1581-08 (Reapproved 2020) |
Standard Specification for Composition of Anorganic Bone for Surgical Implants |
| 08/21/2017 |
Materials |
8-452 |
Complete |
ASTM |
F1635-16 |
Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| 12/23/2016 |
Orthopedic |
11-312 |
Complete |
ISO |
7206-4 Third edition 2010-06-15 |
Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties and performance of stemmed femoral components [Including AMENDMENT 1 (2016)] |
| 12/23/2016 |
Orthopedic |
11-314 |
Complete |
ISO |
14242-2 Second edition 2016-09-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement |
| 12/19/2022 |
Software/
Informatics |
13-127 |
Complete |
ANSI AAMI UL |
2800-1-3:2022 |
Standard for Interoperable Item Integration Life Cycle |
| 12/19/2022 |
Software/
Informatics |
13-121 |
Complete |
ANSI AAMI UL |
2800-1:2022 |
Standard for Medical Device Interoperability |
| 05/30/2022 |
ObGyn/
Gastroenterology/
Urology |
9-139 |
Complete |
CIE ISO |
11664-5:2016 |
Colorimetry - Part 5: CIE 1976 L*u*v* colour space and u',v' uniform chromaticity scale diagram |
| 05/30/2022 |
Materials |
8-585 |
Complete |
ASTM |
F1377-21 |
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
| 04/04/2016 |
Materials |
8-116 |
Complete |
ASTM |
F2258-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| 01/27/2015 |
Orthopedic |
11-283 |
Complete |
ASTM |
F2943-14 (Reapproved 2019) |
Standard Guide for Presentation of End User Labeling Information for Orthopedic Implants Used in Joint Arthroplasty |
| 12/21/2020 |
Dental/
ENT |
4-268 |
Complete |
ISO |
15841 Second edition 2014-08 |
Dentistry - Wires for use in orthodontics [Including AMENDMENT 1 (2020)] |
| ANSI ADA |
Standard No. 32-2017 |
Orthodontic Wires |
| 12/20/2021 |
Software/
Informatics |
13-120 |
Complete |
ANSI AAMI |
2700-1:2019 |
Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model |
| 12/20/2021 |
Materials |
8-563 |
Complete |
ASTM |
F1801-20 |
Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
| 12/23/2019 |
Anesthesiology |
1-145 |
Complete |
ISO |
19223 First edition 2019-07 |
Lung ventilators and related equipment - Vocabulary and semantics. |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-437 |
Complete |
ISO |
23907-2 First edition 2019-11 |
Sharps injury protection - Requirements and test methods - Part 2: Reusable sharps containers. |
| 07/09/2014 |
Sterility |
14-286 |
Complete |
ANSI AAMI |
ST65:2008/(R)2018 |
Processing of reusable surgical textiles for use in health care facilities |
| 03/16/2012 |
Tissue Engineering |
15-31 |
Complete |
ASTM |
F2312-11 (Reapproved 2020) |
Standard Terminology Relating to Tissue Engineered Medical Products |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-177 |
Complete |
ASTM |
E1112-00 (Reapproved 2018) |
Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature |
| 03/16/2012 |
InVitro Diagnostics |
7-165 |
Complete |
CLSI |
H20-A2 (Replaces H20-A) |
Reference Leukocyte (WBC) Differential Count (Proportional) and Evaluation of Instrumental Methods; Approved Standard - Second Edition |
| 03/16/2012 |
InVitro Diagnostics |
7-166 |
Complete |
CLSI |
GP20-A2 (Replaces GP20-A) |
Fine Needle Aspiration Biopsy (FNAB) Techniques; Approved Guideline - Second Edition |
| 03/16/2012 |
InVitro Diagnostics |
7-225 |
Complete |
CLSI |
GP34-A (Replaces GP34-P) |
Validation and Verfication of Tubes for Venous and Capillary Blood Specimen Collection; Approved Guidance |
| 05/30/2022 |
Materials |
8-586 |
Complete |
ASTM |
F2989-21 |
Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| 12/20/2021 |
Materials |
8-570 |
Complete |
ASTM |
F1108-21 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| 12/20/2021 |
Materials |
8-571 |
Complete |
ASTM |
F2052-21 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
| 12/19/2022 |
Anesthesiology |
1-155 |
Complete |
ISO |
10079-2 Fourth edition 2022-03 |
Medical suction equipment - Part 2: Manually powered suction equipment |
| 12/19/2022 |
Anesthesiology |
1-156 |
Complete |
ISO |
10079-3 Fourth edition 2022-03 |
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
| 01/14/2019 |
InVitro Diagnostics |
7-285 |
Complete |
CLSI |
M48-A 2nd Edition |
Laboratory Detection and Identification of Mycobacteria |
| 01/30/2014 |
Dental/
ENT |
4-199 |
Complete |
ISO |
6876 Third edition 2012-06-01 |
Dentistry -- Root canal sealing materials |
| 01/30/2014 |
Physical Medicine |
16-27 |
Complete |
ISO |
7176-15 First edition 1996-11-15 |
Wheelchairs - Part 15: Requirements for information disclosure, documentation and labeling |
| 01/30/2014 |
Physical Medicine |
16-163 |
Complete |
ISO |
7176-5 Second edition 2008-06-01 |
Wheelchairs - Part 5: Determination of overall dimensions, mass and manoeuvring space |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-216 |
Complete |
ISO |
8536-7 Third edition 2009-01-15 |
Infusion equipment for medical use - Part 7: Caps made of aluminum-plastics combinations for infusion bottles |
| 01/30/2014 |
Cardiovascular |
3-63 |
Complete |
ISO |
11318:2002 |
Cardiac Defibrillators -- Connector assembly DF-1 for implantable defibrillators - Dimensions and test requirements. |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-240 |
Complete |
ISO |
8536-3 Third edition 2009-06-01 |
Infusion equipment for medical use - Part 3: Aluminum caps for infusion bottles |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-276 |
Complete |
ISO |
8536-1 Fourth edition 2011-09-01 |
Infusion equipment for medical use - Part 1: Infusion glass bottles |
| 12/20/2021 |
Materials |
8-578 |
Complete |
ASTM |
F2848-21 |
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
| 12/20/2021 |
Materials |
8-579 |
Complete |
ISO |
13779-3 Second Edition 2018-12 |
Implants for surgery -- Hydroxyapatite -- Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity [Including AMENDMENT 1 (2021)] |
| 05/30/2022 |
Sterility |
14-577 |
Complete |
ISO |
11737-1 Third edition 2018-01 [Including AMD1:2021] |
Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on product [Including Amendment 1 (2021)] |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-381 |
Complete |
ISO |
6009 Fourth edition 2016-08-01 |
Hypodermic needles for single use - Colour coding for identification. |
| 12/21/2020 |
Dental/
ENT |
4-270 |
Complete |
ANSI ADA |
Technical Report No. 146-2018 |
CAD/CAM Abutments in Dentistry |
| 01/14/2019 |
Software/
Informatics |
13-79 |
Complete |
IEC |
62304 Edition 1.1 2015-06 CONSOLIDATED VERSION |
Medical device software - Software life cycle processes |
| ANSI AAMI IEC |
62304:2006/A1:2016 |
Medical device software - Software life cycle processes [Including Amendment 1 (2016)] |
| 12/18/2023 |
Materials |
8-605 |
Complete |
ASTM |
F1609-23 |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 01/27/2015 |
Materials |
8-171 |
Complete |
ASTM |
F1609-08 (Reapproved 2014) |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 01/30/2014 |
Sterility |
14-395 |
Complete |
ISO |
14698-2 First edition 2003-09-15 |
Cleanrooms and Associated Controlled Environments - Biocontamination Control - Part 2: Evaluation and Interpretation of Biocontamination Data [Including: Technical Corrigendum 1 (2004)] |
| 01/30/2014 |
Sterility |
14-397 |
Complete |
AOAC |
6.2.04:2013 |
Official Method 955.15, Testing Disinfectants Against Staphylococcus aureus,Use-Dilution Method |
| 01/30/2014 |
Sterility |
14-398 |
Complete |
AOAC |
6.3.05:2013 |
Official Method 966.04, Sporicidal Activity of Disinfectants Method I |
| 01/30/2014 |
Sterility |
14-399 |
Complete |
AOAC |
6.3.06:2012 |
Official Method 965.12 Tuberculocidal Activity of Disinfectants |
| 01/30/2014 |
Sterility |
14-400 |
Complete |
ASTM |
F2203-13 (Reapproved 2022) |
Standard Test Method for Linear Measurement Using Precision Steel Rule |
| 07/09/2014 |
General I (QS/
RM) |
5-88 |
Complete |
ISO |
2859-1 Second edition 1999-11-15 |
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection [Including: Technical Corrigendum 1 (2001), Amendment 1 (2011)] |
| 08/21/2017 |
Materials |
8-459 |
Complete |
SAE |
AMS2750 Rev. E 2012-07 |
Pyrometry |
| 06/07/2018 |
Tissue Engineering |
15-52 |
Complete |
ASTM |
F2064-17 |
Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
| 04/04/2016 |
Materials |
8-408 |
Complete |
ASTM |
F3122-14 |
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| 08/21/2017 |
Materials |
8-457 |
Complete |
ISO |
13175-3 First edition 2012-10-01 |
Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| 12/21/2020 |
Dental/
ENT |
4-265 |
Complete |
ISO |
10271 Third edition 2020-08 |
Dentistry - Corrosion test methods for metallic materials |
| ANSI ADA |
Standard No. 97-2020 |
Corrosion Test Methods for Metallic Materials |
| 12/20/2021 |
Cardiovascular |
3-177 |
Complete |
ASTM |
F2606-08 (Reapproved 2021) |
Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems |
| 12/20/2021 |
Nanotechnology |
18-19 |
Complete |
ISO |
19749 First edition 2021-07 |
Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy |
| 12/20/2021 |
Nanotechnology |
18-20 |
Complete |
ASTM |
E3275-21 |
Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis |
| 12/20/2021 |
Dental/
ENT |
4-285 |
Complete |
ANSI ADA |
Standard No. 37-1986 (R2020) |
Dental Abrasive Powders |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-482 |
Complete |
AAMI |
TIR101:2021 |
Fluid delivery performance testing for infusion pumps |
| 07/06/2020 |
InVitro Diagnostics |
7-297 |
Complete |
ISO |
TS 20914 First edition 2019-07 |
Medical laboratories - Practical guidance for the estimation of measurement uncertainty |
| 01/14/2019 |
Materials |
8-489 |
Complete |
ASTM |
F3302-18 |
Standard for Additive Manufacturing - Finished Part Properties - Standard Specification for Titanium Alloys via Powder Bed Fusion |
| 12/23/2016 |
Biocompatibility |
2-189 |
Complete |
ASTM |
F895-11 (Reapproved 2016) |
Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-68 |
Complete |
ISO |
23409 First edition 2011-02-15 |
Male Condoms - Requirements and test methods for condoms made from synthetic materials |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-111 |
Complete |
ISO |
4074 Third edition 2015-10-15 |
Natural latex rubber condoms - Requirements and test methods |
| 05/30/2022 |
Materials |
8-591 |
Complete |
ASTM |
F2229-21 |
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| 12/20/2021 |
Orthopedic |
11-391 |
Complete |
ASTM |
F2722-21 |
Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
| 12/19/2022 |
Biocompatibility |
2-297 |
Complete |
ASTM |
F763-22 |
Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials |
| 05/30/2022 |
Materials |
8-587 |
Complete |
ISO |
5832-3 Fifth Edition 2021-11 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| 08/21/2017 |
Materials |
8-453 |
Complete |
ASTM |
F1295-16 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 07/06/2020 |
Sterility |
14-542 |
Complete |
ISO ASTM |
52628 Second edition 2020-04 |
Standard practice for dosimetry in radiation processing |
| 07/15/2019 |
Orthopedic |
11-357 |
Complete |
ISO |
15142-3 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 3: Connection devices and reamer diameter instruments |
| 07/06/2020 |
Sterility |
14-545 |
Complete |
ISO ASTM |
51276 Fourth edition 2019-08 |
Practice for use of a polymethylmethacrylate dosimetry system |
| 07/06/2020 |
Sterility |
14-549 |
Complete |
ASTM |
F3004-13 (Reapproved 2020) |
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
| 12/23/2019 |
General I (QS/
RM) |
5-125 |
Complete |
ISO |
14971 Third Edition 2019-12 |
Medical devices - Application of risk management to medical devices |
| ANSI AAMI ISO |
14971: 2019 |
Medical devices - Applications of risk management to medical devices |
| 07/15/2019 |
Anesthesiology |
1-143 |
Complete |
ISO |
80601-2-79 First edition 2018-07 |
Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment |
| 12/20/2021 |
Dental/
ENT |
4-287 |
Complete |
ANSI ADA |
Standard No. 116-2020 |
Oral Rinses (Modified adoption of ISO 16408:2015, Dentistry Oral Care Products -Oral Rinses) |
| 12/20/2021 |
InVitro Diagnostics |
7-309 |
Complete |
ISO |
17099 First edition 2014-11-15 |
Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry |
| 12/20/2021 |
Dental/
ENT |
4-288 |
Complete |
ISO |
7488 Second edition 2018-04 |
Dentistry - Mixing machines for dental amalgam |
| ANSI ADA |
Standard No. 43-2020 |
Electrically Powered Dental Amalgamators |
| 12/20/2021 |
Dental/
ENT |
4-289 |
Complete |
ISO |
18556 Frist edition 2016-04 |
Dentistry - Intraoral spatulas |
| 12/20/2021 |
Dental/
ENT |
4-290 |
Complete |
ISO |
28158 Second edition 2018-09 |
Dentistry - Integrated dental floss and handles |
| ANSI ADA |
Standard No. 185-2020 |
Integrated Dental Floss and Handles |
| 01/14/2019 |
Orthopedic |
11-347 |
Complete |
ASTM |
F2077-18 |
Test Methods for Intervertebral Body Fusion Devices |
| 05/26/2025 |
Orthopedic |
11-422 |
Complete |
ASTM |
F1798-24 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-510 |
Complete |
IEC |
80601-2-77 Edition 1.1 2023-11 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-77: Particular requirements for the BASIC SAFETY and essential performance of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-438 |
Complete |
IEC |
80601-2-77 Edition 1.0 2019-07 |
Medical electrical equipment - Part 2-77: Particular requirements for the BASIC SAFETY and essential performance of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT |
| ANSI AAMI IEC |
80601-2-77:2020 |
Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment |
| 12/23/2024 |
InVitro Diagnostics |
7-323 |
Complete |
CLSI |
EP19 3rd Edition |
A Framework for Using CLSI Documents to Evaluate Clinical Laboratory Measurement Procedures |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-478 |
Complete |
ISO |
11608-1:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems |
| 02/07/2022 |
General II (ES/
EMC) |
19-45 |
Complete |
AIM |
Standard 7351731 Rev. 3.00 2021-06-04 |
Medical Electrical Equipment and System Electromagnetic Immunity Test for Exposure to Radio Frequency Identification Readers - An AIM Standard |
| 12/20/2021 |
Orthopedic |
11-392 |
Complete |
ASTM |
F2723-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
| 12/20/2021 |
Biocompatibility |
2-292 |
Complete |
USP-NF |
M98833_01_01 |
<87> Biological Reactivity Test, In Vitro - Direct Contact Test |
| 12/23/2024 |
Sterility |
14-606 |
Complete |
ANSI AAMI |
ST24:2024 |
General-purpose ethylene oxide sterilizers with automated process control and ethylene oxide sterilant sources intended for use in health care facilities
|
| 12/18/2023 |
Orthopedic |
11-402 |
Complete |
ASTM |
F1798-21 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| 05/26/2025 |
Sterility |
14-610 |
Complete |
ISO |
11138-7 First edition 2019-03 |
Sterilization of health care products - Biological indicators - Part 7: Guidance for the selection, use and interpretation of results |
| 03/31/2006 |
Radiology |
12-136 |
Complete |
ISO |
9236-1 Second edition 2004-02-01 |
Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient |
| 08/02/2011 |
Ophthalmic |
10-66 |
Complete |
ISO |
10936-2 Second edition 2010-01-15 |
Optics and photonics - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery |
| 01/30/2014 |
Sterility |
14-429 |
Complete |
ISO ASTM |
51275 Third edition 2013-06-01 |
Practice for use of a radiochromic film dosimetry system |
| 01/30/2014 |
Sterility |
14-336 |
Complete |
ISO |
14161 Second edition 2009-09-15 |
Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results |
| ANSI AAMI ISO |
14161-2009/(R)2014 |
Sterilization of health care products - Biological indicators: Guidance for the selection, use and interpretation of results |
| 07/15/2019 |
Sterility |
14-528 |
Complete |
ISO |
11137-1 First edition 2006-04-15 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2018)] |
| ANSI AAMI ISO |
11137-1:2006/(R)2015 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation, and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2019)] |
| 05/26/2025 |
Neurology |
17-22 |
Complete |
IEC |
60601-2-10 Edition 2.2 2023-01 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
| 01/15/2013 |
Software/
Informatics |
13-36 |
Complete |
AAMI |
TIR 45:2012 |
Guidance on the use of AGILE practices in the development of medical device software |
| 06/07/2018 |
Neurology |
17-16 |
Complete |
IEC |
60601-2-10 Edition 2.1 2016-04 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
| 12/20/2021 |
Orthopedic |
11-388 |
Complete |
ASTM |
F1717-21 |
Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model |
| 05/29/2023 |
Materials |
8-598 |
Complete |
ASTM |
F3109-22 |
Standard Test Method for Verification of Multi-Axis Force Measuring Platforms |
| 05/26/2025 |
Sterility |
14-611 |
Complete |
ISO |
11137-1 Second edition 2025-04 |
Sterilization of health care products - Radiation - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 05/26/2025 |
Software/
Informatics |
13-148 |
Complete |
IEEE |
Std 11073-10417-2023 |
Health informatics - Device Interoperability Part 10417: Personal health device communication - Device Specialization - Glucose Meter |
| 05/26/2025 |
Software/
Informatics |
13-146 |
Complete |
IEEE |
11073-10103 Second edition 2023 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 05/29/2023 |
Dental/
ENT |
4-301 |
Complete |
ISO |
21563 Second edition 2021-08 |
Dentistry - Hydrocolloid impression materials |
| ANSI ADA |
Standard No. 128-2022 |
Hydrocolloid Impression Materials |
| 05/29/2023 |
Dental/
ENT |
4-302 |
Complete |
ISO |
10477 Fourth edition 2020-10 |
Dentistry - Polymer-based crown and veneering materials |
| ANSI ADA |
Standard No. 53-2022 |
Polymer-Based Crown and Veneering Materials |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-122 |
Complete |
ISO |
25841 Third edition 2017-08 |
Female condoms -- Requirements and test methods |
| 06/27/2016 |
Software/
Informatics |
13-84 |
Complete |
ISO IEEE |
11073-10103 First edition 2014-03-01 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 01/27/2015 |
Software/
Informatics |
13-72 |
Complete |
ISO IEEE |
11073-10425 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) |
| IEEE |
Std 11073-10425-2014 |
Health informatics - Personal health device communication, Part 10425: Device Specialization - Continuous Glucose Monitor (CGM) |
| 01/14/2019 |
Anesthesiology |
1-141 |
Complete |
ISO |
80601-2-13 First edition 2011-08-11 |
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation [Including: Amendment 1 (2015) and Amendment 2 (2018)] |
| 12/18/2023 |
Materials |
8-606 |
Complete |
ASTM |
F2537-23 |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 05/26/2025 |
Neurology |
17-20 |
Complete |
IEC |
60601-2-40 Third edition 2024-12 |
Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment |
| 05/26/2025 |
InVitro Diagnostics |
7-342 |
Complete |
CLSI |
AUTO12-A |
Specimen Labels: Content and Location, Fonts, and Label Orientation; Approved Standard |
| 05/26/2025 |
Software/
Informatics |
13-147 |
Complete |
IEEE |
Std 11073-10406-2023 |
Health informatics - Device Interoperability Part 10406: Personal health device communication - Device Specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) |
| 12/21/2020 |
Nanotechnology |
18-17 |
Complete |
ISO |
21363 First edition 2020-06 |
Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy |
| 12/21/2020 |
Biocompatibility |
2-278 |
Complete |
ASTM |
F719-20 e1 |
Standard Practice for Testing Materials in Rabbits for Primary Skin Irritation |
| 12/21/2020 |
Materials |
8-549 |
Complete |
ASTM |
F3208-20 |
Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
| 07/15/2019 |
Sterility |
14-533 |
Complete |
ISO |
TS 19930 First edition 2017-12 |
Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
| 12/23/2019 |
Physical Medicine |
16-213 |
Complete |
RESNA ANSI |
WC-1:2019 Section 7 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 7: Method of measurement of seating and wheel dimensions |
| 12/23/2019 |
Physical Medicine |
16-225 |
Complete |
RESNA ANSI |
WC-1:2019 Section 26 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 26: Vocabulary |
| 12/23/2019 |
Physical Medicine |
16-214 |
Complete |
RESNA ANSI |
WC-1:2019 Section 8 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 8: Requirements and test methods for static, Iipact and fatigue strengths |
| 07/06/2020 |
Radiology |
12-331 |
Complete |
NEMA |
Standards Publication MS 14-2019 |
Characterization of Radiofrequency (RF) Coil Heating in Magnetic Resonance Imaging Systems |
| 07/15/2019 |
Orthopedic |
11-358 |
Complete |
ISO |
14242-4 First edition 2018-05 |
Implants for surgery - Wear of total hip-joint prostheses - Part 4: Testing hip prostheses under variations in component positioning which results in direct edge loading |
| 01/27/2015 |
Dental/
ENT |
4-136 |
Complete |
ASTM |
F2504-05 (Reapproved 2022) |
Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices |
| 07/15/2019 |
InVitro Diagnostics |
7-288 |
Complete |
CLSI |
M24 3rd Edition |
Susceptibility Testing of Mycobacteria, Nocardiae and other Aerobic Actinomycetes |
| 05/29/2023 |
Sterility |
14-586 |
Complete |
ISO |
22441 First edition 2022-08 |
Sterilization of health care products - Low temperature vaporized hydrogen peroxide - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 06/07/2018 |
Materials |
8-464 |
Complete |
ISO |
TS 10974 Second edition 2018 |
Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device |
| 12/20/2021 |
Materials |
8-573 |
Complete |
ASTM |
F2695-12(2025) |
Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
| 12/19/2022 |
General I (QS/
RM) |
5-137 |
Complete |
IEC |
TR 60878 Ed. 4.0 2022-11 |
Graphical symbols for electrical equipment in medical practice [Including: Corrigendum 1 (2023)] |
| 12/19/2022 |
General I (QS/
RM) |
5-136 |
Complete |
ASTM |
D4332-22 |
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-485 |
Complete |
ISO |
7886-4 Second Edition 2018-11 |
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature |
| 06/07/2018 |
Neurology |
17-15 |
Complete |
ISO |
14708-3 Second edition 2017-04 |
Implants for surgery - Active implantable medical devices - Part 3: Implantable neurostimulators |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-401 |
Complete |
ASTM |
D7160-16 (Reapproved 2023) |
Standard Practice for Determination of Expiration Dating for Medical Gloves |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2023) |
Standard Terminology for Surgical Suture Needles |
| 05/26/2025 |
InVitro Diagnostics |
7-337 |
Complete |
CLSI |
AUTO08-A |
Managing and Validating Laboratory Information Systems; Approved Guideline |
| 07/06/2020 |
General I (QS/
RM) |
5-130 |
Complete |
ISO |
7010 Third edition 2019-07 |
Graphical symbols - Safety colours and safety signs - Registered safety signs |
| 07/06/2020 |
Radiology |
12-333 |
Complete |
IEC |
TR 63183 Edition 1.0 2019-12 |
Guidance on error and warning messages for software used in radiotherapy |
| 06/07/2021 |
Dental/
ENT |
4-278 |
Complete |
ISO |
4823 Fifth edition 2021-02 |
Dentistry - Elastomeric impression and bite registration materials |
| ANSI ADA |
Standard No. 19-2022 |
Elastomeric Impression and Bite Registration |
| 08/14/2015 |
Dental/
ENT |
4-220 |
Complete |
ANSI ASA |
S3.22-2014 (Reaffirmed 2020) |
American National Standard Specification of Hearing Aid Characteristics |
| 08/14/2015 |
Dental/
ENT |
4-184 |
Complete |
ANSI ASA |
S3.25-2009 (Reaffirmed 2024) |
American National Standard For an Occluded Ear Simulator |
| 09/09/2008 |
Dental/
ENT |
4-145 |
Complete |
ISO |
22803 First edition 2004-09-01 |
Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file |
| 08/14/2015 |
Ophthalmic |
10-97 |
Complete |
ISO |
13212 Third edition 2014-09-01 |
Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life |
| 03/16/2012 |
Radiology |
12-134 |
Complete |
ISO |
11146-1 First edition 2005-01-15 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| 05/29/2023 |
Dental/
ENT |
4-298 |
Complete |
ISO |
4049 Fifth edition 2019-05 |
Dentistry - Polymer-based restorative materials |
| ANSI ADA |
Standard No. 27-2022 |
Polymer-based Restorative Materials |
| 12/19/2022 |
General I (QS/
RM) |
5-140 |
Complete |
ASME |
V&V 10-2019 |
Standard for Verification and Validation in Computational Solid Mechanics |
| 12/20/2021 |
Sterility |
14-564 |
Complete |
USP-NF |
M98910_01_01 |
<161> Medical Devices-Bacterial Endotoxin and Pyrogen Tests |
| 12/20/2021 |
Sterility |
14-565 |
Complete |
USP-NF |
M98802_01_01 |
<62> Microbiological Examination of Nonsterile Products: Tests for Specified Microorganisms |
| 12/20/2021 |
Sterility |
14-566 |
Complete |
USP-NF |
M98795_02_01 |
<55> Biological Indicators -- Resistance Performance Tests |
| 09/17/2018 |
Materials |
8-479 |
Complete |
ISO |
13781 Second edition 2017-07 |
Implants for surgery - Homopolymers, copolymers and blends on poly(lactide) - In vitro degradation testing |
| 09/17/2018 |
Orthopedic |
11-324 |
Complete |
ASTM |
F366-17 |
Standard Specification for Fixation Pins and Wires |
| 09/17/2018 |
Orthopedic |
11-325 |
Complete |
ASTM |
F564-17 |
Standard Specification and Test Methods for Metallic Bone Staples |
| 06/07/2018 |
Radiology |
12-315 |
Complete |
NEMA |
MS 8-2016 (R2003) |
Characterization of the Specific Absorption Rate (SAR) for Magnetic Resonance Imaging Systems |
| 05/26/2025 |
InVitro Diagnostics |
7-338 |
Complete |
CLSI |
AUTO10-A |
Autoverification of Clinical Laboratory Test Results; Approved Guideline |
| 05/26/2025 |
InVitro Diagnostics |
7-339 |
Complete |
CLSI |
AUTO09-A |
Remote Access to Clinical Laboratory Diagnostic Devices via the Internet; Approved Standard |
| 01/27/2015 |
Sterility |
14-141 |
Complete |
ISO |
14644-4 First edition 2001-04-01 |
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up |
| 12/18/2023 |
Sterility |
14-590 |
Complete |
ISO |
14644-8 Third edition 2022-06 |
Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) |
| 09/17/2018 |
Materials |
8-466 |
Complete |
ASTM |
F2213-17 |
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
| 06/07/2018 |
Software/
Informatics |
13-104 |
Complete |
UL ANSI |
2900-2-1 First Edition 2017 |
Standard for Safety, Software Cybersecurity for Network-Connectable Products, Part 2-1: Particular Requirements for Network Connectable Components of Healthcare and Wellness Systems |
| 06/07/2018 |
Radiology |
12-316 |
Complete |
IEC |
62359 Edition 2.1 2017-09 CONSOLIDATED VERSION |
Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
| 06/07/2018 |
Nanotechnology |
18-9 |
Complete |
ISO |
TR 13014 First edition 2012-05-15 |
Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment [Including CORRIGENDUM 1 (2012)]. |
| 05/30/2022 |
Radiology |
12-344 |
Complete |
IEC |
62563-2 Edition 1.0 2021-11 |
Medical electrical equipment - Medical image display systems - Part 2: Acceptance and constancy tests for medical image displays |
| 12/20/2021 |
Cardiovascular |
3-171 |
Complete |
ASTM |
F2514-21 |
Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading |
| 12/20/2021 |
Cardiovascular |
3-172 |
Complete |
AAMI |
TIR42:2021 |
Evaluation of Particulates Associated with Vascular Medical Devices |
| 01/30/2014 |
Sterility |
14-413 |
Complete |
AOAC |
6.2.06:2013 |
Official Method 964.02, Testing Disinfectants Against Pseudomonas aeruginosa, Use-Dilution Method |
| 01/14/2019 |
Nanotechnology |
18-7 |
Complete |
ASTM |
E2834-12 (Reapproved 2022) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA) |
| 12/23/2019 |
Orthopedic |
11-362 |
Complete |
ISO |
22622 First edition 2019-07 |
Implants for surgery - Wear of total ankle-joint prostheses - Loading and displacement parameters for wear-testing machines with load or displacement control and corresponding environmental conditions for test |
| 01/27/2015 |
Dental/
ENT |
4-185 |
Complete |
ANSI ASA |
S3.45-2009 (Reaffirmed 2024) |
American National Standard Procedures for Testing Basic Vestibular Function |
| 07/09/2014 |
Dental/
ENT |
4-211 |
Complete |
ANSI ASA |
S3.46-2013 (Reaffirmed 2023) |
American National Standard Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids |
| 01/30/2014 |
Sterility |
14-403 |
Complete |
ASTM |
F2054/F2054M-13 (Reapproved 2020) |
Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates |
| 01/30/2014 |
Sterility |
14-430 |
Complete |
ISO ASTM |
51607 Third edition 2013-06-01 |
Practice for use of an alanine-EPR dosimery system |
| 01/14/2019 |
Materials |
8-487 |
Complete |
ISO ASTM |
52910-18 |
Additive manufacturing - Design - Requirements, guidelines and recommendations |
| 12/19/2022 |
Dental/
ENT |
4-294 |
Complete |
ANSI ADA |
Standard No. 139-2020 |
Dental Base Polymers |
| 12/20/2021 |
Ophthalmic |
10-129 |
Complete |
ASTM |
D790-17 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| 12/19/2022 |
Sterility |
14-580 |
Complete |
ISO |
11137-2 Third edition 2013-06 [Including AMD1:2022] |
Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose [Including Amendment 1 (2022)] |
| 09/17/2018 |
Materials |
8-468 |
Complete |
ASTM |
F2459-18 |
Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis |
| 09/17/2018 |
Materials |
8-380 |
Complete |
ASTM |
F1160-14 (Reapproved 2017)e1 |
Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| 09/17/2018 |
Materials |
8-470 |
Complete |
ASTM |
F2102-17 |
Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants |
| 06/07/2018 |
Tissue Engineering |
15-51 |
Complete |
ASTM |
F2347-15 |
Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| 05/26/2025 |
Radiology |
12-370 |
Complete |
ISO |
11146-2 Second edition 2021-07 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams |
| 05/26/2025 |
Software/
Informatics |
13-140 |
Complete |
FIRST |
CVSS v4.0 |
Common Vulnerability Scoring System version 4.0 |
| 12/19/2022 |
Materials |
8-596 |
Complete |
ASTM |
D412-16(2021) |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension |
| 12/19/2022 |
Anesthesiology |
1-159 |
Complete |
ISO |
18778 Second edition 2022-06 |
Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors |
| 03/18/2009 |
InVitro Diagnostics |
7-145 |
Complete |
CLSI |
H42-A2 (Replaces H42-A) |
Enumeration of Immunologically Defined Cell Populations by Flow Cytometry; Approved Guideline - Second Edition. |
| 09/09/2008 |
Radiology |
12-165 |
Complete |
NEMA |
XR 22-2006 (R2020) |
"Quality Control Manual" Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in Full-field Digital Mammography |
| 05/05/2010 |
InVitro Diagnostics |
7-205 |
Complete |
CLSI |
H47-A2 |
One-Stage Prothrombin Time (PT) Test and Activated Partial Thromboplastin Time (APTT) Test; Approved Guideline - Second Edition. |
| 05/05/2010 |
InVitro Diagnostics |
7-207 |
Complete |
CLSI |
GP16-A3 (Replaces GP16-A2) |
Urinalysis; Approved Guideline - Third Edition |
| 08/02/2011 |
InVitro Diagnostics |
7-219 |
Complete |
CLSI |
I/LA28-A2 |
Quality Assurance for Design Control and Implementation of Immunohistochemistry Assays; Approved Guidelines-Second Edition. |
| 12/20/2021 |
Ophthalmic |
10-130 |
Complete |
ANSI |
Z80.36-2021 |
American National Standard for Ophthalmics - Light Hazard Protection for Ophthalmic Instruments |
| 12/20/2021 |
Dental/
ENT |
4-284 |
Complete |
ISO |
10873 Second edition 2021-07 |
Dentistry - Denture adhesives |
| 12/19/2022 |
Dental/
ENT |
4-296 |
Complete |
ISO |
9873 Fourth edition 2019-03 |
Dentistry - Intra-oral mirrors |
| ANSI ADA |
Standard No. 191-2020 |
Intra-Oral Mirrors |
| 12/19/2022 |
Dental/
ENT |
4-297 |
Complete |
ISO |
20126 Third edition 2022-03 |
Dentistry - Manual toothbrushes - General requirements and test methods |
| 06/07/2018 |
Tissue Engineering |
15-54 |
Complete |
ASTM |
F3207-17 |
Standard Guide for in vivo Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
| 06/07/2018 |
Biocompatibility |
2-250 |
Complete |
ASTM |
F756-17 |
Standard Practice for Assessment of Hemolytic Properties of Materials |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-424 |
Complete |
ASTM |
D5151-19(2023) |
Standard Test Method for Detection of Holes in Medical Gloves |
| 03/16/2012 |
Radiology |
12-175 |
Complete |
ISO |
24013 First edition 2006-11-15 |
Optics and photonics -- Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation |
| 05/26/2025 |
Ophthalmic |
10-137 |
Complete |
ISO |
11979-2 Third edition 2024-10 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-483 |
Complete |
IEC |
60601-2-35 Edition 2.0 2020-09 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
| 05/26/2025 |
InVitro Diagnostics |
7-329 |
Complete |
CLSI |
EP06-EG 2nd Edition |
Developer Validation of Linearity, Establishment Guide |
| 12/19/2022 |
Ophthalmic |
10-133 |
Complete |
ISO |
11979-10 Second edition 2018-03 |
Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes. |
| 12/19/2022 |
Orthopedic |
11-397 |
Complete |
ASTM |
F3210-22e1 |
Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions |
| 04/03/2023 |
General II (ES/
EMC) |
19-49 |
Complete |
IEC |
60601-1 Edition 3.2 2020-08 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
- Note: This standard is recognized with relevant US national differences applied, see references #1 and #2 in the Relevant FDA Guidance and/or Supportive Publication section below. |
| 09/17/2018 |
Ophthalmic |
10-112 |
Complete |
ISO |
11986 Third edition 2017-11 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-123 |
Complete |
ASTM |
E667-98 (Reapproved 2017) |
Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-409 |
Complete |
ASTM |
F703-18 (Reapproved 2022) |
Standard Specification for Implantable Breast Prostheses |
| 05/30/2022 |
Materials |
8-593 |
Complete |
ISO |
13779-6 First Edition 2015-01-15 Corrected Version 2016-09-15 |
Implants for surgery - Hydroxyapatite - Part 6: Powders |
| 07/09/2014 |
InVitro Diagnostics |
7-213 |
Complete |
CLSI |
GP44-A4 (Formerly H18-A4) |
Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests; Approved Guideline-Fourth Edition |
| 03/16/2012 |
Radiology |
12-142 |
Complete |
ISO |
11146-2 First edition 2005-02-15 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams |
| 10/19/2020 |
Software/
Informatics |
13-116 |
Complete |
FIRST |
CVSS v3.0 |
Common Vulnerability Scoring System version 3.0 |
| 05/26/2025 |
Software/
Informatics |
13-145 |
Complete |
IEEE |
Std 11073-10419:2023 |
Health informatics - Device Interoperability Part 10419: Personal health device communication - Device Specialization - Insulin Pump |
| 12/20/2021 |
Cardiovascular |
3-178 |
Complete |
ASTM |
F3067-14 (Reapproved 2021) |
Standard Guide for Radial Loading of Balloon-Expandable and Self-Expanding Vascular Stents |
| 12/19/2022 |
Materials |
8-594 |
Complete |
ISO |
5832-6 Third Edition 2022-03 |
Implants for surgery -- Metallic materials -- Part 6:Wrought cobalt-nickel-chromium-molybdenum alloy |
| 06/27/2016 |
Materials |
8-427 |
Complete |
ASTM |
F1185-03 (Reapproved 2014) |
Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
| 12/23/2016 |
Physical Medicine |
16-199 |
Complete |
ISO |
7176-28 First edition 2012-10-1 |
Wheelchairs Part 28: Requirements and test methods for stairclimbing devices |
| 08/21/2017 |
Materials |
8-458 |
Complete |
ASTM |
G5-14 |
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| 06/27/2016 |
General I (QS/
RM) |
5-108 |
Complete |
ISO |
80369-6 First Edition 2016-03-15 |
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications. |
| 01/30/2014 |
Sterility |
14-402 |
Complete |
ASTM |
F1140/F1140M-13 (Reapproved 2020)e1 |
Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages |
| 05/26/2025 |
Anesthesiology |
1-194 |
Complete |
ISO |
27427 Fourth edition 2023-07 |
Anaesthetic and respiratory equipment - Nebulizing systems and components |
| 12/19/2022 |
Orthopedic |
11-398 |
Complete |
ASTM |
F3574-22 |
Standard Test Methods for Sacroiliac Joint Fusion Devices |
| 12/20/2021 |
General II (ES/
EMC) |
19-44 |
Complete |
IEEE ANSI |
C63.24-2021 |
American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems |
| 12/20/2021 |
General I (QS/
RM) |
5-134 |
Complete |
ISO |
15223-1 Fourth edition 2021-07 |
Medical devices - Symbols to be used with information to be supplied by the manufacturer - Part 1: General requirements |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-472 |
Complete |
USP-NF |
M36660_04_01 |
Heparin Lock Flush Solution |
| 12/04/2017 |
Software/
Informatics |
13-102 |
Complete |
IEC |
TR 80001-2-8 Edition 1.0 2016-05 |
Application of risk management for IT-networks incorporating medical devices - Part 2-8: Application guidance - Guidance on standards for establishing the security capabilities identified in IEC TR 80001-2-2 |
| 04/04/2016 |
General II (ES/
EMC) |
19-17 |
Complete |
IEEE ANSI |
C63.18-2014 |
American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF Transmitters |
| 06/07/2021 |
Dental/
ENT |
4-281 |
Complete |
ISO |
1797 Third Edition 2017-05 |
Dentistry - Shanks for rotary and oscillating instruments |
| ANSI ADA |
Standard No. 179-2020 |
Shanks for Rotary and Oscillating Instruments |
| 09/17/2018 |
InVitro Diagnostics |
7-279 |
Complete |
CLSI |
M07 11th Edition |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically |
| 09/17/2018 |
InVitro Diagnostics |
7-280 |
Complete |
CLSI |
M02 13th Edition |
Performance Standards for Antimicrobial Disk Susceptibility Tests |
| 12/23/2024 |
General Plastic Surgery/
General Hospital |
6-504 |
Complete |
ASTM |
F1862/F1862M-24 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 08/14/2015 |
Ophthalmic |
10-98 |
Complete |
ISO |
11979-2 Second edition 2014-08-15 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods |
| 07/15/2019 |
Materials |
8-516 |
Complete |
ISO |
13779-4 Second edition 2018-12 |
Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength |
| 12/21/2020 |
Biocompatibility |
2-279 |
Complete |
ASTM |
F750-20 |
Standard Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse |
| 06/07/2021 |
Sterility |
14-562 |
Complete |
ANSI AAMI |
ST79:2017 & 2020 Amendments A1, A2, A3, A4 |
(Consolidated Text) Comprehensive guide to steam sterilization and sterility assurance in health care facilities |
| 06/07/2021 |
Materials |
8-556 |
Complete |
ASTM |
F640-20 |
Standard Test Methods for Determining Radiopacity for Medical Use |
| 08/21/2017 |
Orthopedic |
11-175 |
Complete |
ASTM |
F1582-98 (Reapproved 2016) |
Standard Terminology Relating to Spinal Implants |
| 08/21/2017 |
Orthopedic |
11-309 |
Complete |
ASTM |
F116-12 (Reapproved 2016) |
Standard Specification for Medical Screwdriver Bits |
| 08/21/2017 |
Materials |
8-449 |
Complete |
ASTM |
F1058-16 |
Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| 01/30/2014 |
Radiology |
12-59 |
Complete |
IEC |
61168:1993 |
Radiotherapy simulators - Functional performance characteristics |
| 01/30/2014 |
Radiology |
12-264 |
Complete |
NEMA |
MS 11-2010 |
Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance Imaging |
| 06/07/2018 |
Radiology |
12-312 |
Complete |
IEC |
61391-1 Edition 1.1 2017-07 CONSOLIDATED VERSION |
Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response |
| 05/26/2025 |
Radiology |
12-371 |
Complete |
ISO |
14880-2 Second edition 2024-11 |
Optics and photonics -- Microlens arrays -- Part 2: Test methods for wavefront aberrations |
| 12/19/2007 |
Radiology |
12-171 |
Complete |
ISO |
14880-2:2006 |
Optics and photonics -- Microlens arrays -- Part 2: Test methods for wavefront aberrations |
| 12/23/2024 |
Cardiovascular |
3-193 |
Complete |
ISO |
12417-1 Second edition 2024-02 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements |
| 12/21/2020 |
Biocompatibility |
2-281 |
Complete |
ISO |
TS 10993-19 Second edition 2020-03 |
Biological evaluation of medical devices - Part 19: Physico-chemical, morphological and topographical characterization of materials |
| 12/21/2020 |
Dental/
ENT |
4-269 |
Complete |
ISO |
3964 Third edition 11-2016 |
Dentistry - Coupling dimensions for handpiece connectors [Including AMENDMENT 1 (2018)] |
| ANSI ADA |
Standard No. 158-2020 |
Coupling Dimensions for Dental Handpiece Connectors |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
