|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 08/14/2015 |
Radiology |
12-290 |
Complete |
IEC |
61910-1 Edition 1.0 2014-09 |
Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy |
| 07/15/2019 |
Materials |
8-493 |
Complete |
ISO |
13779-2 Third edition 2018-12 |
Implants for surgery - Hydroxyapatite - Part 2: Thermally sprayed coatings of hydroxyapatite |
| 01/27/2015 |
Neurology |
17-13 |
Complete |
IEEE |
Std 2010-2012 |
Recommended Practice for Neurofeedback Systems |
| 05/29/2024 |
Materials |
8-611 |
Complete |
ISO |
9584 Second edition 2023-10 |
Implants for surgery - Non-destructive testing - Radiographic examination of cast metallic surgical implants |
| 07/09/2014 |
Radiology |
12-275 |
Complete |
IEC |
61161 Edition 3.0 2013-01 |
Ultrasonics -- Power measurement -- Radiation force balances and performance requirements |
| 07/15/2019 |
Materials |
8-503 |
Complete |
ASTM |
F2042-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications - Part II - Crosslinking and Fabrication |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-406 |
Complete |
ASTM |
F1862/F1862M-17 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 09/17/2018 |
Anesthesiology |
1-140 |
Complete |
ISO |
80601-2-55 Second edition 2018-02 |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| 08/06/2013 |
Software/
Informatics |
13-38 |
Complete |
IEC |
80001-1 Edition 1.0 2010-10 |
Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
| ANSI AAMI IEC |
80001-1:2010 |
Application of risk management for IT Networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
| 01/30/2014 |
Software/
Informatics |
13-63 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-4:2012 |
Application of risk management for IT-networks incorporating medical devices - Part 2-4: General implementation guidance for healthcare delivery organizations |
| IEC |
TR 80001-2-4 Edition 1.0 2012-11 |
Application of risk management for IT-networks incorporating medical devices -- Part 2-4: Application guidance - General implementation guidance for healthcare delivery organization |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-407 |
Complete |
ASTM |
F3186-17 |
Standard Specification for Adult Portable Bed Rails and Related Products |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-508 |
Complete |
IEC |
80601-2-59 Edition 2.1 2023-01 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
| 12/23/2019 |
General II (ES/
EMC) |
19-33 |
Complete |
IEC |
62133-2 Edition1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems |
| 07/06/2020 |
Tissue Engineering |
15-61 |
Complete |
ASTM |
F2150-19 |
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
| 12/23/2019 |
Materials |
8-523 |
Complete |
ASTM |
F3275-19 |
Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device |
| 12/23/2019 |
Materials |
8-524 |
Complete |
ASTM |
F3276-19 |
Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device |
| 03/16/2012 |
Radiology |
12-177 |
Complete |
UL |
122-2007 (R2011) |
Standard for Photographic Equipment - Ed. 5.0 |
| 05/26/2025 |
Radiology |
12-376 |
Complete |
IEC |
61689 Edition 4.0 2022-03 |
Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0.5 MHz to 5 MHz |
| 01/30/2014 |
Radiology |
12-266 |
Complete |
IEC |
61689 Edition 3.0 2013-02 |
Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0.5 MHz to 5 MHz |
| 07/15/2019 |
Materials |
8-509 |
Complete |
ASTM |
F702-18 |
Standard Specification for Polysulfone Resin for Medical Applications |
| 12/23/2019 |
Physical Medicine |
16-226 |
Complete |
RESNA ANSI |
WC-4:2017 Section 10 |
American National Standard for Wheelchairs - Volume 4: Wheelchairs and Transporation Section 10 Wheelchair and occupant retention systems for use in large accessible transit vehicles: systems for rearward-facing passengers. |
| 01/14/2019 |
Biocompatibility |
2-145 |
Complete |
ASTM |
F1439-03 (Reapproved 2018) |
Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials |
| 05/26/2025 |
Biocompatibility |
2-307 |
Complete |
ASTM |
F1877-24 |
Standard Practice for Characterization of Particles |
| 07/06/2020 |
Software/
Informatics |
13-115 |
Complete |
ISO IEC IEEE |
29119-1 First edition 2013-09-01 |
Software and systems engineering - Software testing - Part 1: Concepts and definitions |
| 07/15/2019 |
Materials |
8-518 |
Complete |
ASTM |
F3306-19 |
Standard Test Method for Ion Release Evaluation of Medical Implants |
| 08/21/2017 |
Biocompatibility |
2-246 |
Complete |
ASTM |
F1877-16 |
Standard Practice for Characterization of Particles |
| 12/23/2024 |
Radiology |
12-363 |
Complete |
NEMA |
PS 3.1 - 3.20 2024e |
Digital Imaging and Communications in Medicine (DICOM) Set |
| 12/23/2019 |
Materials |
8-484 |
Complete |
ASTM |
F2066-18 |
Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| 05/26/2025 |
Biocompatibility |
2-305 |
Complete |
ASTM |
E1262-24 |
Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay |
| 01/14/2019 |
Biocompatibility |
2-136 |
Complete |
ASTM |
E1262-88 (Reapproved 2018) |
Standard Guide for Performance of the Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay |
| 05/29/2023 |
Materials |
8-599 |
Complete |
ASTM |
F1295-22 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 12/21/2020 |
Sterility |
14-554 |
Complete |
ASTM |
F17-20 |
Standard Terminology Relating to Flexible Barrier Packaging |
| 12/23/2019 |
Materials |
8-521 |
Complete |
ASTM |
F2313-18 |
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide |
| 07/06/2020 |
Sterility |
14-539 |
Complete |
ASTM |
F2475-20 |
Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials |
| 07/06/2020 |
Materials |
8-529 |
Complete |
ASTM |
F2633-19 |
Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| 12/23/2024 |
Cardiovascular |
3-194 |
Complete |
ISO |
7199 Fourth edition 2024-09 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| 06/07/2018 |
Cardiovascular |
3-150 |
Complete |
ISO |
7199 Third edition 2016-11-15 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| ANSI AAMI ISO |
7199:2016 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators). |
| 07/09/2014 |
Dental/
ENT |
4-160 |
Complete |
ANSI ASA |
S3.1-1999 (Reaffirmed 2023) |
American National Standard Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms |
| 12/18/2023 |
Radiology |
12-352 |
Complete |
NEMA |
PS 3.1 - 3.20 2023e |
Digital Imaging and Communications in Medicine (DICOM) Set |
| 12/23/2024 |
Radiology |
12-364 |
Complete |
IEC |
61223-3-8 Edition 1.0 2024-03 |
Evaluation and routine testing in medical imaging departments - Part 3-8: Acceptance and constancy tests - Imaging performance of X-ray equipment for radiography and radioscopy
|
| 12/23/2016 |
General II (ES/
EMC) |
19-20 |
Complete |
IEEE ANSI |
C63.16-2016 (Revision of ANSI C63.16-1993) |
American National Standard Guide for Electrostatic Discharge Test Methodologies and Acceptance Criteria for Electronic Equipment |
| 08/06/2013 |
Software/
Informatics |
13-59 |
Complete |
ISO IEC IEEE |
15026-4 First edition 2021-10-01 |
Systems and software engineering - Systems and software assurance - Part 4: Assurance in the life cycle |
| 12/04/2017 |
Software/
Informatics |
13-99 |
Complete |
ISO IEC |
15459-2 Third edition 2015-03-01 |
Information technology - Automatic identification and data capture techniques - Unique identification - Part 2: Registration procedures |
| 12/23/2024 |
Radiology |
12-365 |
Complete |
IEC |
60627 Edition 3.0 2013-07 |
Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids |
| 12/23/2024 |
Radiology |
12-366 |
Complete |
IEC |
61223-3-6 Edition 1.0 2020-02 |
Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation |
| 12/23/2019 |
Materials |
8-508 |
Complete |
ASTM |
F2579-18 |
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants |
| 12/23/2019 |
Sterility |
14-538 |
Complete |
ASTM |
F3357-19 |
Standard Guide for Designing Reusable Medical Devices for Cleanability |
| 07/15/2019 |
Ophthalmic |
10-117 |
Complete |
ANSI |
Z80.37-2017 (R2021) |
American National Standard for Ophthalmics - Slit-Lamp Microscopes |
| 07/15/2019 |
InVitro Diagnostics |
7-287 |
Complete |
CLSI |
M44-S3 (2018) |
Zone Diameter Interpretive Standards, Corresponding Minimal Inhibitory Concentration (MIC) Interpretive Breakpoints, and Quality Control Limits for Antifungal Disk Diffusion Susceptibility Testing of Yeasts; Third Informational Supplement |
| 12/23/2024 |
General II (ES/
EMC) |
19-51 |
Complete |
UL |
1642 Sixth Edition September 29, 2020 |
Standard For Safety Lithium Batteries |
| 09/17/2018 |
Orthopedic |
11-333 |
Complete |
ASTM |
F382-17 |
Standard Specification and Test Method for Metallic Bone Plates |
| 01/14/2019 |
General I (QS/
RM) |
5-122 |
Complete |
ASME |
V&V 40-2018 |
Assessing Credibility of Computational Modeling Through Verification and Validation: Application to Medical Devices |
| 01/14/2019 |
Cardiovascular |
3-158 |
Complete |
ASTM |
F3320-18 |
Standard Guide forCoating Characterization of Drug Coated Balloons |
| 01/14/2019 |
Dental/
ENT |
4-255 |
Complete |
ANSI ADA |
Standard No. 131-2015 (R2020) |
Dental CAD/CAM Machinable Zirconia Blanks |
| 07/15/2019 |
Orthopedic |
11-355 |
Complete |
ISO |
15142-1 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails |
| 07/15/2019 |
Ophthalmic |
10-118 |
Complete |
ANSI |
Z80.38-2017 (R2021) |
American National Standard for Ophthalmics - Light Hazard from Operation Microscopes Used in Ocular Surgery |
| 03/18/2009 |
InVitro Diagnostics |
7-189 |
Complete |
CLSI |
M47-A (Replaces M47-P) |
Principles and Procedures for Blood Cultures; Approved Guideline |
| 07/15/2019 |
Radiology |
12-326 |
Complete |
NEMA |
NU 2-2018 |
Performance Measurements of Positron Emission Tomographs |
| 05/26/2025 |
Radiology |
12-383 |
Complete |
NEMA |
NU 1-2023 |
Performance Measurements of Gamma Cameras |
| 06/07/2021 |
Radiology |
12-337 |
Complete |
NEMA |
NU 1-2018 |
Performance Measurements of Gamma Cameras |
| 05/26/2025 |
General I (QS/
RM) |
5-144 |
Complete |
ISO |
80369-20 Second edition 2024-11 |
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods |
| 04/04/2016 |
Materials |
8-115 |
Complete |
ASTM |
F2256-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
| 04/04/2016 |
Materials |
8-136 |
Complete |
ASTM |
F2458-05 (Reapproved 2015) |
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
| 08/06/2013 |
Materials |
8-153 |
Complete |
ASTM |
F2119-07 (Reapproved 2013) |
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants |
| 08/06/2013 |
Materials |
8-158 |
Complete |
ASTM |
F1713-08 (Reapproved 2013) |
Standard Specification for Wrought Titanium-13 Niobium-13 Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| 04/04/2016 |
Physical Medicine |
16-195 |
Complete |
ISO |
7176-1 Third edition 2014-10-01 |
Wheelchairs - Part 1: Determination of static stability |
| 04/04/2016 |
Radiology |
12-188 |
Complete |
NEMA |
MS-1-2008 (R2020) |
Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging |
| 04/04/2016 |
Radiology |
12-187 |
Complete |
NEMA |
MS 3-2008 (R2020) |
Determination of Image Uniformity in Diagnostic Magnetic Resonance Images |
| 07/28/2025 |
General II (ES/
EMC) |
19-57 |
Complete |
IEC |
61326-2-6 Edition 4.0 2025-06 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| 12/21/2020 |
General I (QS/
RM) |
5-132 |
Complete |
IEC |
60601-1-6 Edition 3.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| 12/21/2020 |
Tissue Engineering |
15-65 |
Complete |
ISO |
22442-2 Third edition 2020-09 |
Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling |
| 12/23/2024 |
Orthopedic |
11-413 |
Complete |
ASTM |
F543-23 |
Standard Specification and Test Methods for Metallic Medical Bone Screws |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-405 |
Complete |
IEC |
80601-2-59 Edition 2.0 2017-09 |
Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
| 06/07/2021 |
Tissue Engineering |
15-66 |
Complete |
ASTM |
F2260-18 |
Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1HNMR) Spectroscopy |
| 12/21/2020 |
General II (ES/
EMC) |
19-37 |
Complete |
IEC |
60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
| 06/07/2021 |
Dental/
ENT |
4-277 |
Complete |
ANSI IEEE |
C63.19-2019 |
American National Standard Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids |
| 07/15/2019 |
Orthopedic |
11-356 |
Complete |
ISO |
15142-2 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 2: Locking components |
| 12/23/2024 |
Dental/
ENT |
4-329 |
Complete |
ISO |
6872 Fifth edition 2024-08 |
Dentistry - Ceramic materials |
| 05/29/2024 |
Dental/
ENT |
4-326 |
Complete |
ISO |
9687 Second edition 2015-02 |
Dentistry - Graphical symbols for dental equipment [Including AMENDMENT 1 (2018)] |
| 05/29/2024 |
Dental/
ENT |
4-327 |
Complete |
ISO |
21531 First edition 2009-02 |
Dentistry - Graphical symbols for dental instruments |
| 08/21/2017 |
Materials |
8-452 |
Complete |
ASTM |
F1635-16 |
Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| 12/23/2016 |
Orthopedic |
11-312 |
Complete |
ISO |
7206-4 Third edition 2010-06-15 |
Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties and performance of stemmed femoral components [Including AMENDMENT 1 (2016)] |
| 12/23/2016 |
Orthopedic |
11-314 |
Complete |
ISO |
14242-2 Second edition 2016-09-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement |
| 03/16/2012 |
Ophthalmic |
10-70 |
Complete |
ISO |
10943 Third edition 2011-08-15 |
Ophthalmic instruments - Indirect ophthalmoscopes |
| 05/29/2024 |
Anesthesiology |
1-178 |
Complete |
ISO |
23747 Second edition 2015-08 |
Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
| 12/23/2019 |
Physical Medicine |
16-228 |
Complete |
RESNA ANSI |
WC-4:2017 Section 19 |
American National Standard for Wheelchairs - Volume 4: Wheelchairs and Transportation Section 19: Wheelchairs used as seats in motor vehicles. |
| 07/15/2019 |
Materials |
8-504 |
Complete |
ASTM |
F561-19 |
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| 05/29/2023 |
Dental/
ENT |
4-307 |
Complete |
ISO |
13504 First edition 2012-07 |
Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment |
| 05/29/2023 |
Dental/
ENT |
4-308 |
Complete |
ISO |
14708-7 Second edition 2019-12 |
Implants for surgery - Active implantable medical devices - Part 7: Particular requirements for cochlear and auditory brainstem implant systems |
| 12/23/2024 |
Anesthesiology |
1-186 |
Complete |
ISO |
80601-2-80 Second edition 2024-08 |
Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency |
| 12/21/2020 |
Materials |
8-550 |
Complete |
ASTM |
F2181-20 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| 12/21/2020 |
Materials |
8-551 |
Complete |
ASTM |
F2895-20 |
Standard Practice for Digital Radiography of Cast Metallic Implants |
| 12/21/2020 |
Materials |
8-553 |
Complete |
ISO ASTM |
52903-1 First edition 2020-04 |
Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials |
| 12/21/2020 |
InVitro Diagnostics |
7-299 |
Complete |
CLSI |
POCT14 2nd Edition |
Point-of-Care Coagulation Testing and Anticoagulation Monitoring |
| 01/30/2014 |
Cardiovascular |
3-118 |
Complete |
ANSI AAMI |
EC57:2012 |
Testing and reporting performance results of cardiac rhythm and ST-segment measurement algorithms |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-506 |
Complete |
ISO |
8536-2 Fourth edition 2023-01 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles |
| 08/20/2012 |
General Plastic Surgery/
General Hospital |
6-242 |
Complete |
ISO |
8536-2 Third edition 2010-03-15 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-511 |
Complete |
ISO |
11040-4 Fourth edition 2024-06 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 01/14/2019 |
Orthopedic |
11-343 |
Complete |
ASTM |
F2346-18 |
Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs |
| 05/29/2023 |
Sterility |
14-584 |
Complete |
ASTM |
F2391-22 |
Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
| 05/29/2024 |
Materials |
8-612 |
Complete |
ASTM |
F899-23 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-356 |
Complete |
ASTM |
D5712-15(2020) |
Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
| 12/23/2016 |
Orthopedic |
11-316 |
Complete |
ASTM |
F1264-16 |
Standard Specification and Test Methods for Intramedullary Fixation Devices |
| 01/14/2019 |
Nanotechnology |
18-5 |
Complete |
ASTM |
E2859-11 (Reapproved 2017) |
Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
| 01/14/2019 |
Dental/
ENT |
4-251 |
Complete |
ISO |
6872 Fourth edition 2015-06-01 [including AMENDMENT 1 2018-04] |
Dentistry - Ceramic materials |
| ANSI ADA |
Standard No. 69-2020 |
Dental Ceramic |
| 12/23/2024 |
Dental/
ENT |
4-330 |
Complete |
ANSI ADA |
Standard No. 63-2020 |
Endodontic Instruments - Auxillary |
| 08/21/2017 |
Anesthesiology |
1-124 |
Complete |
ISO |
8835-7 First edition 2011-11-01 |
Inhalational anaesthesia systems - Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases |
| 08/21/2017 |
Materials |
8-455 |
Complete |
ASTM |
F2902-16 |
Standard Guide for Assessment of Absorbable Polymeric Implants |
| 04/04/2016 |
Materials |
8-116 |
Complete |
ASTM |
F2258-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| 12/21/2020 |
Dental/
ENT |
4-272 |
Complete |
ANSI ADA |
Standard No. 63-2013 |
Root Canal Barbed Broaches and Rasps |
| 01/27/2015 |
Dental/
ENT |
4-136 |
Complete |
ASTM |
F2504-05 (Reapproved 2022) |
Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices |
| 09/09/2024 |
Sterility |
14-604 |
Complete |
ISO |
11737-3 First Edition 2023-06 |
Sterilization of health care products - Microbiological methods - Part 3: Bacterial endotoxin testing |
| 01/30/2014 |
General I (QS/
RM) |
5-84 |
Complete |
AAMI |
TIR 49:2013/(R)2020 |
Technical Information Report Design of training and instructional materials for medical devices used in non-clinical environments |
| 01/14/2019 |
Orthopedic |
11-272 |
Complete |
ASTM |
F1714-96 (Reapproved 2018) |
Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices |
| 01/30/2014 |
Materials |
8-159 |
Complete |
ISO |
9584 First edition 1993-10-15 |
Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants |
| 12/23/2024 |
Dental/
ENT |
4-331 |
Complete |
ISO |
28399 Third edition 2021-03 |
Dentistry - External tooth bleaching products |
| ANSI ADA |
Standard No. 136-2022 |
Dentistry - External Tooth Bleaching Products |
| 12/20/2021 |
Dental/
ENT |
4-291 |
Complete |
ISO |
28399 First edition 2011-01 |
Dentistry - Products for external tooth bleaching |
| ANSI ADA |
Standard No. 136-2015 (R2020) |
Products for External Tooth Bleaching |
| 12/23/2024 |
Dental/
ENT |
4-332 |
Complete |
ANSI ADA |
Standard No. 206-2024 |
Implantable Materials for Bone Filling and Augmentation in Oral and Maxillofacial Surgery - Contents of a Technical File |
| 12/23/2016 |
Software/
Informatics |
13-86 |
Complete |
ISO IEC |
15026-1 First edition 2013-11-01 |
Systems and software engineering - Systems and software assurance - Part 1: Concepts and vocabulary |
| 08/21/2017 |
Dental/
ENT |
4-239 |
Complete |
ANSI AAMI |
CI86:2017/(R)2025 |
Cochlear implant systems: Requirements for safety, functional verification, labeling and reliability reporting |
| 01/14/2019 |
Biocompatibility |
2-141 |
Complete |
ASTM |
F1984-99 (Reapproved 2018) |
Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials |
| 08/14/2015 |
Dental/
ENT |
4-220 |
Complete |
ANSI ASA |
S3.22-2014 (Reaffirmed 2020) |
American National Standard Specification of Hearing Aid Characteristics |
| 05/29/2024 |
Anesthesiology |
1-175 |
Complete |
ISO |
18562-3 Second Edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds |
| 12/04/2017 |
Software/
Informatics |
13-101 |
Complete |
ISO IEC |
15459-6 Second edition 2014 Corrected 2016 |
Information technology - Automatic identification and data capture techniques - Unique identification - Part 6: Groupings |
| 08/21/2017 |
Software/
Informatics |
13-97 |
Complete |
IEC |
82304-1 Edition 1.0 2016-10 |
Health software - Part 1: General requirements for product safety |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-410 |
Complete |
ISO |
8536-6 Third edition 2016-12-01 |
Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles |
| 05/26/2025 |
General II (ES/
EMC) |
19-56 |
Complete |
IEC |
60086-4 Edition 6.0 2025-01 |
Primary batteries - Part 4: Safety of lithium batteries |
| 05/26/2025 |
InVitro Diagnostics |
7-337 |
Complete |
CLSI |
AUTO08-A |
Managing and Validating Laboratory Information Systems; Approved Guideline |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-489 |
Complete |
IEC |
60601-2-52 Edition 1.1 2015-03 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
|
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-321 |
Complete |
IEC |
60601-2-52 Edition 1.0 2009-12 |
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds [Including: Technical Corrigendum 1 (2010)] |
| 07/06/2020 |
Orthopedic |
11-363 |
Complete |
ASTM |
F897-19 |
Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws |
| 12/23/2024 |
Dental/
ENT |
4-334 |
Complete |
ISO |
11143 Second edition 2008-07 |
Dentistry - Amalgam separators |
| ANSI ADA |
Standard No. 108-2009, Addendum (R2022) |
Amalgam Separators |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-147 |
Complete |
ISO CIE |
11664-2 First edition 2022-08 |
Colorimetry - Part 2: CIE standard illuminants |
| 07/09/2014 |
Orthopedic |
11-276 |
Complete |
ASTM |
F1798-13 |
Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| 12/18/2023 |
Dental/
ENT |
4-309 |
Complete |
ISO |
6877 Third edition 2021-09 |
Dentistry - Endodontic obturating materials |
| ANSI ADA |
Standard No. 78-2022 |
Dentistry - Endodontic Obturating Materials |
| 01/30/2014 |
Dental/
ENT |
4-137 |
Complete |
ISO |
6877 Second edition 2006-04-01 |
Dentistry - Root-canal obturating points |
| ANSI ADA |
Standard No. 78-2013 |
Dental obturating cones |
| 08/21/2017 |
Materials |
8-449 |
Complete |
ASTM |
F1058-16 |
Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| 01/30/2014 |
Radiology |
12-59 |
Complete |
IEC |
61168:1993 |
Radiotherapy simulators - Functional performance characteristics |
| 01/30/2014 |
Radiology |
12-264 |
Complete |
NEMA |
MS 11-2010 |
Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance Imaging |
| 06/07/2018 |
Radiology |
12-312 |
Complete |
IEC |
61391-1 Edition 1.1 2017-07 CONSOLIDATED VERSION |
Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response |
| 06/07/2018 |
Radiology |
12-313 |
Complete |
IEC |
TS 62462 Edition 2.0 2017-07 |
Ultrasonics - Output test - Guide for the maintenance of ultrasound physiotherapy systems |
| 01/30/2014 |
InVitro Diagnostics |
7-239 |
Complete |
CLSI |
EP32-R (Formerly X05-R) |
Metrological Traceability and Its Implementation; A Report |
| 06/07/2018 |
Nanotechnology |
18-10 |
Complete |
ISO |
29701 First edition 2010-09-15 |
Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test. |
| 10/07/2024 |
Anesthesiology |
1-180 |
Complete |
NFPA |
99:2024 |
Health Care Facilities Code |
| 12/19/2022 |
Anesthesiology |
1-153 |
Complete |
NFPA |
99:2021 |
Health Care Facilities Code |
| 05/29/2023 |
Dental/
ENT |
4-303 |
Complete |
ISO |
9333 Third edition 2022-08 |
Dentistry - Brazing materials |
| 09/17/2018 |
Tissue Engineering |
15-55 |
Complete |
ASTM |
F3259-17 |
Standard Guide for Micro-computed Tomography of Tissue Engineered Scaffolds |
| 06/07/2018 |
ObGyn/
Gastroenterology/
Urology |
9-116 |
Complete |
ISO |
29943-2 First edition 2017-07 |
Condoms -- Guidance on clinical studies -- Part 2: Female condoms, clinical function studies based on self-reports. |
| 06/07/2018 |
Dental/
ENT |
4-241 |
Complete |
ISO |
7491 Second edition 2000-09-01 |
Dental materials - Determination of colour stability |
| ANSI ADA |
Standard No. 80-2001 (R2020) |
Dental Materials-Determination of Color Stability |
| 09/17/2018 |
Biocompatibility |
2-255 |
Complete |
ISO |
10993-11 Third edition 2017-09 |
Biological evaluation of medical devices - Part 11: Tests for systemic toxicity |
| ANSI AAMI ISO |
10993-11: 2017 |
Biological evaluation of medical devices - Part 11: Tests for systemic toxicity |
| 09/17/2018 |
Biocompatibility |
2-256 |
Complete |
ASTM |
F720-17 |
Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test |
| 12/23/2024 |
Orthopedic |
11-415 |
Complete |
ASTM |
F2554-22 |
Standard Practice for Measurement of Positional Accuracy of Computer-Assisted Surgical Systems |
| 07/09/2014 |
General II (ES/
EMC) |
19-10 |
Complete |
UL |
1642 5th Edition |
Lithium Batteries |
| 12/23/2019 |
Radiology |
12-309 |
Complete |
IEC |
60601-2-28 Edition 3.0 2017-06 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
| 12/23/2019 |
Radiology |
12-327 |
Complete |
ISO |
11551 Third eidtion 2019-10 |
Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components |
| 07/06/2020 |
Tissue Engineering |
15-62 |
Complete |
ASTM |
F2602-18 |
Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) |
| 07/06/2020 |
Dental/
ENT |
4-263 |
Complete |
ISO |
9693 Third edition 2019-10 |
Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems |
| ANSI ADA |
Standard No. 38-2020 |
Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems |
| 12/23/2019 |
General II (ES/
EMC) |
19-32 |
Complete |
IEC |
62133-1 Edition 1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-439 |
Complete |
ISO |
7886-2 Second edition 2020-04 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps |
| 05/29/2024 |
Cardiovascular |
3-191 |
Complete |
ISO |
18242 First edition 2016-09-01 [Including AMD1:2023] |
Cardiovascular implants and extracorporeal systems - Centrifugal blood pumps [Including AMENDMENT 1 (2023)] |
| 05/29/2024 |
Anesthesiology |
1-172 |
Complete |
ISO |
11712 Second edition 2023-11 |
Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors |
| 08/21/2017 |
Ophthalmic |
10-103 |
Complete |
ANSI |
Z80.18-2016 (R2021) |
American National Standard for Ophthalmics - Contact Lens Care Products - Vocabulary, Performance Specifications, and Test Methodology |
| 08/21/2017 |
General II (ES/
EMC) |
19-26 |
Complete |
IEC |
62485-2 Edition 1.0 2010-06 |
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries. |
| 08/21/2017 |
General II (ES/
EMC) |
19-28 |
Complete |
IEC |
62485-4 Edition 1.0 2015-01 |
Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use in portable appliances |
| 08/21/2017 |
Radiology |
12-306 |
Complete |
NEMA |
MS 12-2016 |
Quantification and Mapping of Geometric Distortion for Special Applications |
| 08/21/2017 |
InVitro Diagnostics |
7-270 |
Complete |
CLSI |
I/LA-20 3rd Edition (Replaces I/LA20-A3) |
Analytical Performance Characteristics, Quality Assurance, and Clinical Utility of Immunological Assays for Human Immunoglobulin E Antibodies of Defined Allergen Specificities |
| 09/17/2018 |
Materials |
8-465 |
Complete |
ISO |
5832-2 Fourth edition 2018-03 |
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium |
| 07/15/2019 |
Anesthesiology |
1-143 |
Complete |
ISO |
80601-2-79 First edition 2018-07 |
Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment |
| 09/09/2008 |
Sterility |
14-239 |
Complete |
ISO |
13408-3 First edition 2006-09-15 |
Aseptic processing of health care products - Part 3: Lyophilization |
| ANSI AAMI ISO |
13408-3:2006/(R)2015 |
Aseptic processing of health care products - Part 3: Lyophilization |
| 06/07/2018 |
Neurology |
17-15 |
Complete |
ISO |
14708-3 Second edition 2017-04 |
Implants for surgery - Active implantable medical devices - Part 3: Implantable neurostimulators |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-401 |
Complete |
ASTM |
D7160-16 (Reapproved 2023) |
Standard Practice for Determination of Expiration Dating for Medical Gloves |
| 12/23/2024 |
Anesthesiology |
1-183 |
Complete |
ASTM |
G175-24 |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 05/29/2023 |
Biocompatibility |
2-301 |
Complete |
ASTM |
F1983-23 |
Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications |
| 09/17/2018 |
Materials |
8-112 |
Complete |
ASTM |
F1044-05 (Reapproved 2017)e1 |
Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| 09/17/2018 |
Materials |
8-466 |
Complete |
ASTM |
F2213-17 |
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
| 06/07/2018 |
Software/
Informatics |
13-104 |
Complete |
UL ANSI |
2900-2-1 First Edition 2017 |
Standard for Safety, Software Cybersecurity for Network-Connectable Products, Part 2-1: Particular Requirements for Network Connectable Components of Healthcare and Wellness Systems |
| 06/07/2018 |
Radiology |
12-316 |
Complete |
IEC |
62359 Edition 2.1 2017-09 CONSOLIDATED VERSION |
Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-502 |
Complete |
ISO |
23217 First Edition 2024-02 |
Injection systems for self-administration by paediatric patients - Requirements and guidelines for design |
| 12/23/2024 |
Anesthesiology |
1-184 |
Complete |
ISO |
80601-2-55 Second edition 2018-02 [Including AMD1:2023] |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitor [Including Amendment 1 (2023)]. |
| 12/23/2024 |
Anesthesiology |
1-190 |
Complete |
ISO |
9360-1 First edition 2000-03 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| 12/23/2024 |
Anesthesiology |
1-191 |
Complete |
ISO |
9360-2 First edition 2001-07 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| 01/14/2019 |
Tissue Engineering |
15-56 |
Complete |
ASTM |
F3224-17 |
Standard Test Method for Evaluating Growth of Engineered Cartilage Tissue using Magnetic Resonance Imaging |
| 08/21/2017 |
General II (ES/
EMC) |
19-25 |
Complete |
IEC |
62485-1 Edition 1.0 2015-04 |
Safety requirements for secondary batteries and battery installations - Part 1: General safety information. |
| 08/21/2017 |
General II (ES/
EMC) |
19-27 |
Complete |
IEC |
62485-3 Edition 2.0 2014-07 |
Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
| 04/04/2016 |
Nanotechnology |
18-1 |
Complete |
ASTM |
E2490-09 (Reapproved 2021) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
| 12/23/2024 |
Orthopedic |
11-412 |
Complete |
ASTM |
F3129-24 |
Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses |
| 12/23/2016 |
Orthopedic |
11-317 |
Complete |
ASTM |
F3129-16 |
Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-134 |
Complete |
ISO |
23500-2 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies |
| ANSI AAMI ISO |
23500-2:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies |
| 12/23/2019 |
InVitro Diagnostics |
7-295 |
Complete |
CLSI |
M52, 1st ed. August 2015 (Reaffirmed: January 2020) |
Verification of Commercial Microbial Identification and Antimicrobial Susceptibility Testing Systems. |
| 12/23/2019 |
Physical Medicine |
16-208 |
Complete |
RESNA ANSI |
WC-2:2019 Section 2 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 2: Determination of dynamic stability of electrically powered wheelchairs |
| 12/23/2019 |
Physical Medicine |
16-212 |
Complete |
RESNA ANSI |
WC-2:2019 Section 6 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 6: Determination of maximum speed of electrically powered wheelchairs. |
| 05/29/2023 |
Dental/
ENT |
4-304 |
Complete |
ISO |
21606 Second edition 2022-08 |
Dentistry - Elastomeric auxiliaries for use in orthodontics |
| 09/17/2018 |
Materials |
8-468 |
Complete |
ASTM |
F2459-18 |
Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis |
| 09/17/2018 |
Materials |
8-380 |
Complete |
ASTM |
F1160-14 (Reapproved 2017)e1 |
Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| 09/17/2018 |
Materials |
8-470 |
Complete |
ASTM |
F2102-17 |
Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants |
| 06/07/2018 |
Tissue Engineering |
15-51 |
Complete |
ASTM |
F2347-15 |
Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| 12/23/2024 |
Anesthesiology |
1-192 |
Complete |
ISO |
23371 First edition 2022-05 |
Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices |
| 12/23/2024 |
Dental/
ENT |
4-328 |
Complete |
ANSI ADA |
Standard No. 57-2021 |
Endodontic Sealing Materials |
| 12/23/2024 |
Dental/
ENT |
4-333 |
Complete |
ISO |
3630-4 Second edition 2023-08 |
Dentistry - Endodontic instruments - Part 4: Auxiliary instruments |
| 09/17/2018 |
Cardiovascular |
3-153 |
Complete |
ASTM |
F2743-11 |
Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems |
| 09/17/2018 |
InVitro Diagnostics |
7-284 |
Complete |
CLSI |
EP37 1st Edition |
Supplemental Tables for Interference Testing in Clinical Chemistry |
| 09/17/2018 |
InVitro Diagnostics |
7-277 |
Complete |
CLSI |
GP41 7th Edition |
Collection of Diagnostic Venous Blood Specimens |
| 09/17/2018 |
InVitro Diagnostics |
7-278 |
Complete |
CLSI |
M27 4th Edition |
Reference Method for Broth Dilution Antifungal Susceptibility Testing of Yeasts |
| 09/17/2018 |
Orthopedic |
11-336 |
Complete |
ISO |
17853 Third edition 2011-03-01 |
Wear of implant materials - Polymer and metal wear particles - Isolation and characterization |
| 09/17/2018 |
Orthopedic |
11-338 |
Complete |
ISO |
11491 First edition 2017-07 |
Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses |
| 04/04/2016 |
Materials |
8-406 |
Complete |
ISO |
5832-11 Second edition 2014-09-15 |
Implants for surgery -- Metallic materials -- Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-126 |
Complete |
ISO CIE |
11664-3 First edition 2019-06 |
Colorimetry - Part 3: CIE tristimulus values |
| 07/15/2019 |
General II (ES/
EMC) |
19-35 |
Complete |
UL |
Standard for Standby Batteries |
1989 Edition 5, 2013-10-02, ANSI November 2018 |
| 01/14/2019 |
Software/
Informatics |
13-105 |
Complete |
ANSI AAMI |
SW91:2018 |
Classification of defects in health software |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-138 |
Complete |
ISO |
20695 First edition 2020-03 |
Enteral feeding systems - Design and testing |
| 01/14/2019 |
Anesthesiology |
1-138 |
Complete |
ISO |
80601-2-74 First edition 2017-05 |
Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
| 07/09/2014 |
Materials |
8-378 |
Complete |
ASTM |
D792-13 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| 07/09/2014 |
Materials |
8-379 |
Complete |
ISO |
11542-2 First edition 1998-11-15 |
Plastics - Ultra-high-molecular-weight polyethyelene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties [Including: Technical Corrigendum 1 (2007)] |
| 08/21/2017 |
Orthopedic |
11-280 |
Complete |
ASTM |
F2624-12 (Reapproved 2020) |
Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-485 |
Complete |
ISO |
7886-4 Second Edition 2018-11 |
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature |
| 06/07/2018 |
Anesthesiology |
1-135 |
Complete |
ISO |
18562-2 First edition 2017-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |
| 09/17/2018 |
Cardiovascular |
3-154 |
Complete |
ASTM |
F3211-17 |
Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices |
| 06/27/2016 |
Materials |
8-426 |
Complete |
ASTM |
F3087-15 |
Standard Specification for Acrylic Molding Resins for Medical Implant Applications |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-470 |
Complete |
USP-NF |
M99660_03_01 |
<871> Sutures - Needle Attachment |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-472 |
Complete |
USP-NF |
M36660_04_01 |
Heparin Lock Flush Solution |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-473 |
Complete |
USP-NF |
M80190_04_01 |
Absorbable Surgical Suture |
| 12/18/2023 |
Biocompatibility |
2-302 |
Complete |
ASTM |
F981-23 |
Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices |
| 12/23/2016 |
Biocompatibility |
2-94 |
Complete |
ASTM |
F981-04 (Reapproved 2016) |
Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-498 |
Complete |
ISO |
10555-4 Third edition 2023-11 |
Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-322 |
Complete |
ISO |
10555-4 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 4: Balloon dilatation catheters |
| 06/27/2016 |
Materials |
8-430 |
Complete |
ISO |
13356:2015 Third Edition 2015-09-15 |
Implants for surgery -- Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| 06/27/2016 |
Materials |
8-432 |
Complete |
ISO ASTM |
52921 First Edition 2013-06-01 |
Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies. |
| 06/27/2016 |
Materials |
8-434 |
Complete |
ISO ASTM |
52900 First Edition 2015-12-15 |
Additive manufacturing -- General principles - Terminology |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-380 |
Complete |
ISO |
9626 Second edition 2016-08-01 |
Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods |
| 12/20/2021 |
Dental/
ENT |
4-284 |
Complete |
ISO |
10873 Second edition 2021-07 |
Dentistry - Denture adhesives |
| 12/19/2022 |
Dental/
ENT |
4-296 |
Complete |
ISO |
9873 Fourth edition 2019-03 |
Dentistry - Intra-oral mirrors |
| ANSI ADA |
Standard No. 191-2020 |
Intra-Oral Mirrors |
| 07/06/2020 |
Materials |
8-527 |
Complete |
ASTM |
F899-20 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| 05/29/2024 |
Materials |
8-613 |
Complete |
ASTM |
F2527-24 |
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants |
| 05/29/2024 |
Materials |
8-614 |
Complete |
ASTM |
F3456-22 |
Standard Guide for Powder Reuse Schema in Powder Bed Fusion Processes for Medical Applications for Additive Manufacturing Feedstock Materials |
| 05/29/2024 |
Materials |
8-615 |
Complete |
ISO ASTM |
52926-1 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 1: General qualification of operators |
| 01/25/2013 |
Cardiovascular |
3-89 |
Complete |
ISO |
27186 First edition 2010-03-15 |
Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements |
| ANSI AAMI ISO |
27186:2010 |
Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements |
| 09/17/2018 |
ObGyn/
Gastroenterology/
Urology |
9-117 |
Complete |
ISO |
16038 Second edition 2017-11 |
Male condoms - Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-382 |
Complete |
ISO |
11608-7 First edition 2016-08-01 |
Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment |
| 12/23/2019 |
Physical Medicine |
16-209 |
Complete |
RESNA ANSI |
WC-1:2019 Section 3 |
American National Standard for Wheelchairs - Volume 1: Additional Requirements for Wheelchairs (including Scooters) Section 3: Determination of effectiveness of brakes |
| 12/18/2023 |
Cardiovascular |
3-189 |
Complete |
ASTM |
F2942-19 |
Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents |
| 01/14/2019 |
Cardiovascular |
3-138 |
Complete |
ASTM |
F2942-13 |
Standard Guide for the In Vitro Axial, Bending, and Rotational Durability Test of Vascular Stents |
| 12/18/2023 |
Cardiovascular |
3-190 |
Complete |
ISO |
PAS 7020 First edition 2023-05 |
Sizing parameters of surgical valve prostheses: Requirements regarding the application of ISO 5840-2 |
| 12/18/2023 |
Dental/
ENT |
4-310 |
Complete |
ISO |
22112 Second edition 2017-08 |
Dentistry - Artificial teeth for dental prostheses |
| ANSI ADA |
Standard No. 15-2021 |
Artificial Teeth for Dental Prostheses |
| 03/31/2006 |
Radiology |
12-138 |
Complete |
ISO |
5799 Second edition 1991-08-01 |
Photography -- Direct-exposing medical and dental radiographic film/process systems -- Determination of ISO speed and ISO average gradient |
| 01/30/2014 |
General I (QS/
RM) |
5-47 |
Complete |
ISO |
10012 First edition 2003-01-15 |
Measurement management systems - Requirements for measurement processes and measuring equipment |
| 11/08/2005 |
InVitro Diagnostics |
7-113 |
Complete |
CLSI |
I/LA23-A (Replaces I/LA23-P) |
Assessing the Quality of Immunoassay Systems: Radioimmunoassays, and Enzyme, Fluorescence, and Luminescence Immunoassays; Approved Guideline |
| 12/19/2007 |
Ophthalmic |
10-39 |
Complete |
ISO |
12865 Second edition 2006-07-01 |
Ophthalmic instruments - Retinoscopes |
| 06/07/2018 |
Nanotechnology |
18-9 |
Complete |
ISO |
TR 13014 First edition 2012-05-15 |
Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment [Including CORRIGENDUM 1 (2012)]. |
| 09/09/2008 |
Sterility |
14-142 |
Complete |
ISO |
14698-1:2003 |
Cleanrooms and Associated Controlled Environments - Biocontamination Control - Part 1: General Principles and Methods |
| 03/18/2009 |
InVitro Diagnostics |
7-170 |
Complete |
CLSI |
I/LA21-A2 |
Clinical Evaluation of Immunoassays; Approved Guideline - Second Edition |
| 03/18/2009 |
InVitro Diagnostics |
7-176 |
Complete |
CLSI |
I/LA30-A (Replaces I/LA30-P) |
Immunoassay Interference by Endogenous Antibodies; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-180 |
Complete |
CLSI |
M34-A (Replaces M24-P) |
Western Blot Assay for Antibodies to Borrelia burgdorferi; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-182 |
Complete |
CLSI |
M36-A |
Clinical Use and Interpretation of Serologic Tests for Toxoplasma gondii; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-185 |
Complete |
CLSI |
M41-A |
Viral Culture; Approved Guideline. |
| 03/18/2009 |
General Plastic Surgery/
General Hospital |
6-215 |
Complete |
ASTM |
F2132-01 (Reapproved 2008)e1 |
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps |
| 03/18/2009 |
InVitro Diagnostics |
7-190 |
Complete |
CLSI |
M50-A (Replaces M50-P) |
Quality Control for Commercial Microbial Identification Systems; Approved Guideline |
| 03/16/2012 |
Radiology |
12-232 |
Complete |
NEMA |
MS 4-2010 |
Acoustic Noise Measurement Procedure for Diagnosing Magnetic Resonance Imaging Devices |
| 05/29/2024 |
Radiology |
12-355 |
Complete |
IEC |
60601-2-57 Edition 2.0 2023-07 |
Medical Electrical Equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring, cosmetic and aesthetic use |
| 03/16/2012 |
Radiology |
12-242 |
Complete |
IEC |
60601-2-57 Edition 1.0 2011-01 |
Medical Electrical Equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
| 12/23/2024 |
Materials |
8-619 |
Complete |
ISO |
5832-4 Fourth edition 2024-04 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
| 06/07/2018 |
Ophthalmic |
10-109 |
Complete |
ISO |
18369-1 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| 07/09/2014 |
Radiology |
12-194 |
Complete |
ANSI HPS |
N43.6-2007 (R2013) |
Sealed Radioactive Sources - Classification |
| 07/09/2014 |
Sterility |
14-433 |
Complete |
ASTM |
F2227-13 (Reapproved 2021) |
Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method |
| 08/14/2015 |
Software/
Informatics |
13-74 |
Complete |
IEEE |
Std 11073-10424-2014 |
Health informatics - Personal health device communication, Part 10424: Device Specialization - Sleep Apnoea Breathing Therapy Equipment (SABTE) |
| 12/23/2016 |
Anesthesiology |
1-119 |
Complete |
ISO |
14408 Third edition 2016-02-15 |
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information |
| 01/30/2014 |
Materials |
8-157 |
Complete |
ISO |
9583 First edition 1993-10-15 |
Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants |
| 08/20/2012 |
InVitro Diagnostics |
7-197 |
Complete |
CLSI |
M35-A2 (Replaces M35-A) |
Abbreviated Identification of Bacteria and Yeast; Approved Guideline - Second Edition. |
| 07/09/2014 |
Dental/
ENT |
4-177 |
Complete |
ANSI ASA |
S12.65-2006 (Reaffirmed 2025) |
American National Standard For Rating Noise with Respect to Speech Interference |
| 03/16/2012 |
InVitro Diagnostics |
7-150 |
Complete |
CLSI |
H43-A2 |
Clinical Flow Cytometry Analysis of Neoplastic Hematolymphoid Cells; Approved Guideline - Second Edition |
| 03/16/2012 |
Radiology |
12-106 |
Complete |
ISO |
17526 First edition 2003-06-15 |
Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers |
| 03/16/2012 |
Radiology |
12-246 |
Complete |
ISO |
21254-2 First edition 2011-07-15 |
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2: Threshold determination |
| 03/16/2012 |
Radiology |
12-245 |
Complete |
ISO |
21254-1 First edition 2011-07-15 |
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles |
| 01/15/2013 |
Sterility |
14-359 |
Complete |
ASTM |
F2096-11 (Reapproved 2019) |
Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test) |
| 05/29/2024 |
Software/
Informatics |
13-138 |
Complete |
ISO IEEE |
11073-10700 First Edition 2024-09 |
Health informatics - Device interoperability Part 10700: Point-of-care medical device communication - Standard for base requirements for participants in a Service-oriented Device Connectivity (SDC) system |
| IEEE |
Std 11073-10700-2022 |
Health Informatics - Device Interoperability Part 10700: Point-of-Care Medical Device Communication - Standard for Base Requirements for Participants in a Service-Oriented Device Connectivity (SDC) System |
| 05/29/2024 |
Ophthalmic |
10-136 |
Complete |
IEC |
80601-2-58 Edition 3.0 2024-03 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery |
| ANSI AAMI IEC |
80601-2-58:2024 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery |
| 03/14/2011 |
Radiology |
12-217 |
Complete |
IEC |
62083 Edition 2.0 2009-09 |
Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems |
| 10/04/2010 |
InVitro Diagnostics |
7-212 |
Complete |
CLSI |
EP18-A2 |
Risk Management Techniques to Identify and Control Laboratory Error Sources; Approved Guideline - Second Edition |
| 03/14/2011 |
Radiology |
12-221 |
Complete |
IEC |
61223-3-4 First edition 2000-03 |
Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests - Imaging performance of dental X-ray |
| 03/16/2012 |
Radiology |
12-143 |
Complete |
ISO |
15367-2 First edition 2005-03-15 |
Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartman sensors |
| 03/16/2012 |
Radiology |
12-248 |
Complete |
ISO |
21254-3 First edition 2011-07-15 |
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities |
| 03/16/2012 |
Radiology |
12-174 |
Complete |
ISO |
13697 First edition 2006-05-15 |
Optics and photonics -- Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components |
| 08/06/2013 |
Ophthalmic |
10-78 |
Complete |
ISO |
11979-3 Third edition 2012-12-01 |
Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods |
| 12/23/2019 |
General II (ES/
EMC) |
19-13 |
Complete |
IEC |
62133 Edition 2.0 2012-12 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications [Including: Corrigendum 1 (2013)] |
| 08/06/2013 |
Radiology |
12-211 |
Complete |
IEC |
60601-2-29 Edition 3.0 2008-06 |
Medical electrical equipment - Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators |
| 08/06/2013 |
Dental/
ENT |
4-167 |
Complete |
ANSI ASA |
S3.21-2004 (Reaffirmed 2023) |
American National Standard Methods for Manual Pure-Tone Threshold Audiometry |
| 08/06/2013 |
ObGyn/
Gastroenterology/
Urology |
9-31 |
Complete |
ANSI AAMI |
ID54:1996/(R)2012 |
Enteral feeding set adapters and connectors |
| 08/14/2015 |
Orthopedic |
11-290 |
Complete |
ISO |
8828 Second edition 2014-11-15 |
Implants for surgery -- Guidance on care and handling of orthopaedic implants |
| 01/15/2013 |
InVitro Diagnostics |
7-237 |
Complete |
CLSI |
MM01-A3 (Replaces MM01-A2) |
Molecular Methods for Clinical Genetics and Oncology Testing; Approved Guideline - Third Edition |
| 01/15/2013 |
InVitro Diagnostics |
7-238 |
Complete |
CLSI |
MM06-A2 (Replaces MM06-A) |
Quantitative Molecular Methods for Infectious Diseases; Approved Guideline - Second Edition |
| 01/15/2013 |
Software/
Informatics |
13-35 |
Complete |
ANSI AAMI |
SW87:2012 |
Application of quality management system concepts to medical device data systems |
| 01/15/2013 |
Sterility |
14-213 |
Complete |
AOAC |
6.2.03:2006 |
Official Method 991.48, Testing Disinfectants Against Staphylococcus aureus, Hard Surface Carrier Test Method |
| 01/15/2013 |
Sterility |
14-215 |
Complete |
AOAC |
6.2.05:2006 |
Official Method 991.49, Testing Disinfectants Against Pseudomonas aeruginosa,Hard Surface Carrier Test Method |
| 01/15/2013 |
Sterility |
14-217 |
Complete |
AOAC |
6.3.02:2006 |
Official Method 955.17, Fungicidal Activity of Disinfectants Using Trichophyton mentagrophytes |
| 03/16/2012 |
Anesthesiology |
1-72 |
Complete |
ISO |
10651-5 First edition 2006-02-01 |
Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators |
| 07/09/2014 |
Radiology |
12-272 |
Complete |
IEC |
60601-2-17 Edition 3.0 2013-11 |
Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-354 |
Complete |
ASTM |
D7907-14 (Reapproved 2019) |
Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves |
| 08/14/2015 |
Materials |
8-389 |
Complete |
ISO |
15309 First edition 2013-12-01 |
Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
| 08/14/2015 |
Radiology |
12-292 |
Complete |
IEEE |
Std 3333.2.1-2015 |
IEEE Recommended Practice for Three-Dimensional (3D) Medical Modeling |
| 12/23/2024 |
Sterility |
14-608 |
Complete |
AAMI |
TIR106:2024 |
Microbiological methods - Understanding and use of product bioburden data |
| 12/23/2019 |
Radiology |
12-329 |
Complete |
IEC |
60601-2-43 Edition 2.2 2019-10 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
| 12/23/2016 |
Physical Medicine |
16-199 |
Complete |
ISO |
7176-28 First edition 2012-10-1 |
Wheelchairs Part 28: Requirements and test methods for stairclimbing devices |
| 08/21/2017 |
Materials |
8-458 |
Complete |
ASTM |
G5-14 |
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| 06/27/2016 |
General I (QS/
RM) |
5-108 |
Complete |
ISO |
80369-6 First Edition 2016-03-15 |
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications. |
| 08/21/2017 |
Tissue Engineering |
15-49 |
Complete |
ASTM |
F2027-16 |
Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| 08/21/2017 |
Orthopedic |
11-175 |
Complete |
ASTM |
F1582-98 (Reapproved 2016) |
Standard Terminology Relating to Spinal Implants |
| 07/09/2014 |
Sterility |
14-437 |
Complete |
ISO ASTM |
52701 First edition 2013-11-15 (R2020) |
Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing |
| 07/09/2014 |
Sterility |
14-256 |
Complete |
ASTM |
F2095-07 (Reapproved 2021) |
Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates |
| 06/07/2018 |
Tissue Engineering |
15-52 |
Complete |
ASTM |
F2064-17 |
Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| 05/29/2024 |
Anesthesiology |
1-167 |
Complete |
CGA |
V-5:2019 |
Diameter-Index Safety System (Noninterchangeable Low Pressure Connections for Medical Gas Applications) |
| 10/07/2024 |
Anesthesiology |
1-181 |
Complete |
ASME |
PVHO-1-2023 |
Safety Standard for Pressure Vessels for Human Occupancy |
| 08/06/2013 |
Software/
Informatics |
13-40 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-1 2012 |
Application of risk management for IT-networks incorporating medical devices - Part 2-1: Step-by-step risk management of medical IT-networks; Practical applications and examples |
| IEC |
TR 80001-2-1 Edition 1.0 2012-07 |
Application of risk management for IT- networks incorporating medical devices - Part 2-1: Step-by-step risk management of medical IT-networks - Practical applications and examples |
| 08/06/2013 |
Software/
Informatics |
13-44 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-3:2012 |
Application of risk management for IT Networks incorporating medical devices - Part 2-3: Guidance for wireless networks |
| IEC |
TR 80001-2-3 Edition 1.0 2012-07 |
Application of risk management for IT Networks incorporating medical devices - Part 2-3: Guidance for wireless networks |
| 06/07/2018 |
Ophthalmic |
10-105 |
Complete |
ISO |
11979-8 Third edition 2017-04 |
Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements |
| 06/07/2018 |
Ophthalmic |
10-106 |
Complete |
ISO |
18369-3 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 3: Measurement Methods |
| 06/07/2018 |
Ophthalmic |
10-107 |
Complete |
ISO |
18369-4 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials |
| 07/15/2019 |
Tissue Engineering |
15-58 |
Complete |
ASTM |
F2103-18 |
Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications |
| 07/09/2014 |
Sterility |
14-435 |
Complete |
ASTM |
F2251-13 (Reapproved 2023) |
Standard Test Method for Thickness Measurement of Flexible Packaging Material |
| 07/09/2014 |
Tissue Engineering |
15-40 |
Complete |
ASTM |
F2211-13 |
Standard Classification for Tissue Engineered Medical Products (TEMPs) |
| 08/14/2015 |
InVitro Diagnostics |
7-253 |
Complete |
CLSI |
EP15-A3 (Reaffirmed: September 2019) |
User Verification of Precision and Estimation of Bias; Approved Guideline - Third Edition |
| 06/27/2016 |
Radiology |
12-297 |
Complete |
ANSI IES |
RP-27.1-2015 |
Recommended Practice for Photobiological Safety for Lamps and Lamp Systems - General Requirements |
| 06/27/2016 |
Radiology |
12-298 |
Complete |
NEMA |
MS 10-2010 |
Determination of Local Specific Absorption Rate (SAR) in Diagnostic Magnetic Resonance Imaging |
| 12/23/2024 |
Materials |
8-627 |
Complete |
ASTM |
F3604-23 |
Standard Practice for Validating the Additive Manufacturing (AM) Production Process for Medical Devices Produced Using Laser Powder Bed Fusion. |
| 12/23/2024 |
Materials |
8-626 |
Complete |
ASTM |
E2948-24 |
Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-149 |
Complete |
IEC |
60601-2-39 Edition 3.0 2018-04 |
Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
|
| 09/17/2018 |
ObGyn/
Gastroenterology/
Urology |
9-120 |
Complete |
ASTM |
D3492-16 |
Standard Specification for Rubber Contraceptives (Male Condoms) |
| 09/17/2018 |
Physical Medicine |
16-202 |
Complete |
ISO |
7176-2 Third edition 2017-10 |
Wheelchairs - Part 2:Determination of dynamic stability of electrically powered wheelchairs |
| 09/17/2018 |
Physical Medicine |
16-203 |
Complete |
ASME |
A18.1-2017 |
Safety Standard for Platform Lifts and Stairway Chairlifts |
| 09/17/2018 |
Cardiovascular |
3-156 |
Complete |
ISO |
14708-1 Second edition 2014-08-15 |
Implants for surgery -- Active implantable medical devices -- Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| ANSI AAMI ISO |
14708-1:2014 |
Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| 08/21/2017 |
InVitro Diagnostics |
7-273 |
Complete |
CLSI |
M58 1st Edition |
Methods for Identification of Cultured Microorganisms Using Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry |
| 08/21/2017 |
Software/
Informatics |
13-93 |
Complete |
ISO IEEE |
11073-10422:2017 |
Health informatics - Personal health device communication, Part 10422: Device Specialization - Urine Analyzer |
| IEEE |
Std 11073-10422-2016 |
Health informatics - Personal health device communication, Part 10422: Device Specialization - Urine Analyzer |
| 08/21/2017 |
Dental/
ENT |
4-233 |
Complete |
ISO |
20795-2 Second edition 2013-03-01 |
Dentistry - Base polymers - Part 2: Orthodontic base polymers |
| 08/21/2017 |
Sterility |
14-501 |
Complete |
ASTM |
F1886/F1886M-16 |
Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection |
| 12/21/2020 |
Dental/
ENT |
4-270 |
Complete |
ANSI ADA |
Technical Report No. 146-2018 |
CAD/CAM Abutments in Dentistry |
| 09/09/2024 |
Sterility |
14-460 |
Complete |
ISO |
11140-1 Third edition 2014-11-01 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| ANSI AAMI ISO |
11140-1:2014 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| 09/09/2024 |
Sterility |
14-605 |
Complete |
ISO |
13004 First edition 2022-10 |
Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD |
| ANSI AAMI ISO |
13004:2022 |
Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD |
| 01/30/2014 |
Anesthesiology |
1-81 |
Complete |
CGA |
V-5:2008 (Reaffirmed 2013) |
Diameter-Index Safety System (Noninterchangeable Low Pressure Connections for Medical Gas Applications) |
| 01/30/2014 |
Anesthesiology |
1-97 |
Complete |
CGA |
V-7.1:2011 |
Standard Method of Determining Cylinder Valve Outlet Connections for Medical Gases |
| 06/27/2016 |
Dental/
ENT |
4-202 |
Complete |
ANSI ADA |
Standard No. 58-2010 (R2015) |
Root Canal Files, Type H (Hedstrom) |
| 01/30/2014 |
Physical Medicine |
16-167 |
Complete |
ISO |
7176-9 Third edition 2009-11-15 |
Wheelchairs - Part 9: Climatic tests for electric wheelchairs |
| 01/30/2014 |
Radiology |
12-262 |
Complete |
ISO |
11670 Second edition 2003-04-01 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability [Including: Technical Corrigendum 1 (2004)] |
| 07/09/2014 |
InVitro Diagnostics |
7-48 |
Complete |
CLSI |
C60-A |
Blood Alcohol Testing in the Clinical Laboratory; Approved Guideline |
| 07/09/2014 |
InVitro Diagnostics |
7-221 |
Complete |
CLSI |
GP39-A6 (Formerly H01-A6) |
Tubes and Additives for Venous Blood Specimen Collection; Approved Standard-Sixth Edition |
| 01/27/2015 |
Sterility |
14-166 |
Complete |
ISO |
14644-7 First edition 2004-10-01 |
Cleanrooms and associated controlled environments - Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) |
| 12/23/2016 |
Cardiovascular |
3-144 |
Complete |
ISO |
7198 Second edition 2016-08-01 |
Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches |
| ANSI AAMI ISO |
7198:2016 |
Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2023) |
Standard Terminology for Surgical Suture Needles |
| 09/17/2018 |
Materials |
8-472 |
Complete |
ASTM |
F2847-17 |
Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments |
| 09/17/2018 |
Materials |
8-474 |
Complete |
ASTM |
F2886-17 |
Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| 06/07/2018 |
Materials |
8-113 |
Complete |
ASTM |
F1147-05 (Reapproved 2017)e1 |
Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| 07/15/2019 |
Orthopedic |
11-350 |
Complete |
ASTM |
F2554-18 |
Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems |
| 12/23/2024 |
Orthopedic |
11-416 |
Complete |
ASTM |
F2996-24 |
Standard Test Method for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems |
| 12/23/2024 |
Sterility |
14-607 |
Complete |
ANSI AAMI |
ST58:2024 |
Chemical sterilization and high-level disinfection in health care facilities |
| 05/29/2024 |
Anesthesiology |
1-168 |
Complete |
CGA |
V-7.1:2021 |
Standard Method of Determining Cylinder Valve Outlet Connections for Medical Gases |
| 05/29/2024 |
Anesthesiology |
1-169 |
Complete |
CGA |
V-1:2021 |
Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connection |
| 12/19/2022 |
Anesthesiology |
1-154 |
Complete |
ASME |
PVHO-1-2019 |
Safety Standard for Pressure Vessels for Human Occupancy |
| 07/26/2016 |
Biocompatibility |
2-227 |
Complete |
ASTM |
F1983-14 |
Standard Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-148 |
Complete |
ISO CIE |
11664-6 Second edition 2022-08 |
Colorimetry - Part 6: CIEDE2000 colour-difference formula |
| 12/18/2023 |
Dental/
ENT |
4-311 |
Complete |
ISO |
9917-2 Third edition 2017-09 |
Dentistry - Water-based cements - Part 2: Resin-modified cements |
| 05/29/2023 |
Radiology |
12-351 |
Complete |
IEC |
60601-2-43 Edition 3.0 2022-12 |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
| 12/18/2023 |
Dental/
ENT |
4-313 |
Complete |
ISO |
27020 Second edition 2019-06 |
Dentistry - Brackets and tubes for use in orthodontics |
| ANSI ADA |
Standard No.100-2020 |
Orthodontic Brackets and Tubes |
| 01/27/2015 |
Dental/
ENT |
4-218 |
Complete |
ISO |
27020 First edition 2010-12-15 |
Dentistry - Brackets and tubes for use in orthodontics |
| ANSI ADA |
Standard No.100-2012 |
Orthodontic Brackets and Tubes |
| 05/29/2024 |
Sterility |
14-603 |
Complete |
AAMI |
TIR28:2016/(R)2020 |
Product adoption and process equivalence for ethylene oxide sterilization |
| 12/23/2016 |
Materials |
8-435 |
Complete |
ISO |
5832-1 Fifth edition 2016-07-15 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel |
| 05/29/2024 |
Anesthesiology |
1-170 |
Complete |
CGA |
C-9:2019 |
Standard Color Marking of Compressed Gas Containers for Medical Use |
| 07/09/2014 |
Anesthesiology |
1-101 |
Complete |
CGA |
C-9:2013 |
Standard Color Marking of Compressed Gas Containers for Medical Use |
| 05/29/2024 |
Anesthesiology |
1-171 |
Complete |
ISO |
5367 Sixth edition 2023-07 |
Anaesthetic and respiratory equipment - Breathing sets and connectors |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-464 |
Complete |
ISO |
11040-4 Third edition 2015-04-01 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling [Including AMENDMENT 1 (2020)] |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-507 |
Complete |
ISO |
23908 Second Edition 2024-12 |
Sharps injury protection - Sharps protection mechanisms for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration - Requirements and test methods |
| 05/29/2023 |
Sterility |
14-585 |
Complete |
AAMI ISO |
TIR16775:2023 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| ISO |
TS 16775 Second edition 2021-11 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| 12/18/2023 |
Anesthesiology |
1-163 |
Complete |
ISO |
80601-2-72 Second edition 2023-06 |
Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 12/23/2024 |
Materials |
8-620 |
Complete |
ISO |
5832-11 Third edition 2024-03 |
Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 12/18/2023 |
Orthopedic |
11-406 |
Complete |
ASTM |
F3141-23 |
Standard Guide for Total Knee Replacement Loading Profiles |
| 08/14/2015 |
Anesthesiology |
1-105 |
Complete |
ISO |
80601-2-72 First edition 2015-04-11 |
Medical electrical equipment - Part 2-72: Particular requirements for basic safely and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 09/11/2023 |
Orthopedic |
11-401 |
Complete |
ISO |
21535 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants |
| 04/04/2016 |
Orthopedic |
11-299 |
Complete |
ASTM |
F2068-15 |
Standard Specification for Femoral Prostheses - Metallic Implants |
| 05/29/2024 |
Materials |
8-616 |
Complete |
ISO ASTM |
52926-2 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 2: Qualification of operators for PBF-LB |
| 05/29/2024 |
Materials |
8-617 |
Complete |
ISO ASTM |
52926-3 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 3: Qualification of operators for PBF-EB |
| 05/29/2024 |
General I (QS/
RM) |
5-142 |
Complete |
ISO |
780 Fifth edition 2015-12-01 |
Packaging - Distribution packaging - Graphical symbols for handling and storage of packages |
| 12/23/2024 |
Dental/
ENT |
4-338 |
Complete |
ISO |
22683 First edition 2022-05 |
Dentistry - Rotational adaptability test between implant body and implant abutment in dental implant systems |
| 12/23/2024 |
General Plastic Surgery/
General Hospital |
6-503 |
Complete |
ISO |
16571 Second edition 2024-03 |
Systems for evacuation of plume generated by medical device |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-491 |
Complete |
ASTM |
F1670/F1670M-17a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 05/29/2024 |
Radiology |
12-356 |
Complete |
IEC |
60601-2-22 Edition 4.0 2019-11 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| 01/14/2014 |
Radiology |
12-268 |
Complete |
IEC |
60601-2-22 Edition 3.1 2012-10 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| 05/29/2024 |
Radiology |
12-354 |
Complete |
NEMA |
MS 4-2023 |
Acoustic Noise Measurement Procedure for Diagnosing Magnetic Resonance Imaging Devices |
| 12/23/2024 |
Materials |
8-618 |
Complete |
ASTM |
F1350-24 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| 04/04/2016 |
Materials |
8-393 |
Complete |
ASTM |
F1350-15 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| 12/23/2024 |
Materials |
8-625 |
Complete |
ASTM |
F1295-24 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 12/23/2024 |
Materials |
8-622 |
Complete |
ASTM |
F2004-24 |
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| 09/17/2018 |
Materials |
8-476 |
Complete |
ASTM |
F2004-17 |
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| 12/23/2024 |
Materials |
8-624 |
Complete |
ASTM |
F2129-24 |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| 01/30/2014 |
Dental/
ENT |
4-151 |
Complete |
ISO |
22112 First edition 2005-11-01 |
Dentistry - Artificial teeth for dental prostheses |
| ANSI ADA |
Standard No. 15-2008 (R2013) |
Artificial Teeth for Dental Prostheses |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-273 |
Complete |
ISO |
23908 First edition 2011-06-11 |
Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling |
| 05/26/2025 |
Biocompatibility |
2-306 |
Complete |
ASTM |
F1439-24 |
Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials |
| 06/27/2016 |
Software/
Informatics |
13-83 |
Complete |
AAMI |
TIR57:2016 |
Principles for medical device security - Risk management. |
| 08/14/2015 |
Anesthesiology |
1-103 |
Complete |
ISO |
5367 Fifth edition 2014-10-15 |
Anaesthetic and respiratory equipment - Breathing sets and connectors |
| 05/29/2024 |
Software/
Informatics |
13-139 |
Complete |
ISO IEEE |
11073-10206:2024 |
Health informatics - Device interoperability Part 10206: Personal health device communication - Abstract content information model |
| IEEE |
Std 11073-10206-2022 |
Health informatics - Device interoperability - Part 10206: Personal health device communication - Abstract Content Information Model |
| 07/15/2019 |
Anesthesiology |
1-126 |
Complete |
ISO |
11712 First edition 2009-05-15 |
Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors |
| 05/29/2023 |
Radiology |
12-347 |
Complete |
IEC |
60601-2-33 Edition 4.0 2022-08 |
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis |
| 12/18/2023 |
Dental/
ENT |
4-320 |
Complete |
ISO |
13402 First edition 1995-08-01 |
Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure |
| 01/30/2014 |
Dental/
ENT |
4-188 |
Complete |
ISO |
9917-2 Second edition 2010-04-15 |
Dentistry - Water-based cements - Part 2: Resin-modified cements |
| 05/29/2024 |
Neurology |
17-18 |
Complete |
IEEE |
Std 2010-2023 |
Recommended Practice for Electroencephalography (EEG) Neurofeedback Systems |
| 04/04/2016 |
Sterility |
14-277 |
Complete |
ANSI AAMI ISO |
TIR 17665-2:2009 |
Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO ANSI/AAMI/ISO 17665-1 |
| ISO |
TS 17665-2 First edition 2009-01-15 |
Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 |
| 12/18/2023 |
Orthopedic |
11-404 |
Complete |
ASTM |
F2887-23 |
Standard Specification for Total Elbow Prostheses |
| 08/21/2017 |
Orthopedic |
11-321 |
Complete |
ASTM |
F2887-17 |
Standard Specification for Total Elbow Prostheses |
| 05/29/2024 |
Software/
Informatics |
13-136 |
Complete |
ISO IEEE |
11073-20601 Third Edition 2022-12 |
Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol |
| 12/18/2023 |
Orthopedic |
11-405 |
Complete |
ASTM |
F1829-23 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
| 06/07/2018 |
Anesthesiology |
1-136 |
Complete |
ISO |
18562-3 First edition 2017-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds |
| 07/06/2020 |
Software/
Informatics |
13-113 |
Complete |
IEEE |
Std 11073-20601-2019 |
Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol. |
| 07/06/2020 |
Software/
Informatics |
13-114 |
Complete |
IEEE |
Std 11073-10101-2019 |
Health informatics - Point-of-care medical device communication. Part 10101: Nomenclature |
| 05/29/2024 |
Sterility |
14-600 |
Complete |
ASTM |
F1929-23 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| 06/27/2015 |
Sterility |
14-484 |
Complete |
ASTM |
F1929-15 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| 05/29/2024 |
Anesthesiology |
1-176 |
Complete |
ISO |
18562-4 Second Edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate |
| 05/29/2024 |
Sterility |
14-601 |
Complete |
ISO |
17665 First edition 2024-03 |
Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 05/29/2023 |
InVitro Diagnostics |
7-315 |
Complete |
CLSI |
EP12 3rd Edition |
Evaluation of Qualitative, Binary Output Examination Performance |
| 04/04/2016 |
Cardiovascular |
3-125 |
Complete |
ISO |
5841-3 Third edition 2013-04-15 |
Implants for surgery - Cardiac pacemakers - Part 3: Low-profile connectors [IS-I] for implantable pacemakers |
| 05/29/2024 |
Radiology |
12-360 |
Complete |
IEC |
63145-10 Edition 1.0 2023-09 |
Eyewear display - Part 10: Specifications |
| 05/29/2024 |
Radiology |
12-361 |
Complete |
ICDM |
IDMS Version 1.2 May 2023 |
Information Display Measurements Standard |
| 08/21/2017 |
Dental/
ENT |
4-215 |
Complete |
ANSI ADA |
Standard No. 96-2012 |
Dental Water-based Cements |
| 05/29/2024 |
Sterility |
14-602 |
Complete |
AAMI |
TIR12:2020/(R)2023 |
Designing, testing, and labeling medical devices intended for processing by health care facilities: A guide for device manufacturers |
| 05/29/2023 |
InVitro Diagnostics |
7-316 |
Complete |
CLSI |
NBS01 7th Edition |
Dried Blood Spot Specimen Collection for Newborn Screening |
| 04/04/2016 |
Materials |
8-405 |
Complete |
ISO |
5832-4 Third edition 2014-09-15 |
Implants for surgery -- Metallic materials -- Part 4: Cobalt-chromium-molybdenum casting alloy |
| 09/17/2018 |
Orthopedic |
11-335 |
Complete |
ASTM |
F3141-17a |
Standard Guide for Total Knee Replacement Loading Profiles |
| 05/29/2024 |
Cardiovascular |
3-192 |
Complete |
ISO |
22679 First edition 2021-11 |
Cardiovascular implants - Transcatheter cardiac occluders
|
| 07/09/2014 |
Anesthesiology |
1-99 |
Complete |
ASTM |
G175-13 (Reapproved 2021) |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 05/29/2024 |
Software/
Informatics |
13-134 |
Complete |
ISO IEEE |
11073-10404 Second edition 2022-12 |
Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter |
| IEEE |
Std 11073-10404-2020 |
Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter |
| 05/29/2023 |
Anesthesiology |
1-161 |
Complete |
ISO |
16628 Second edition 2022-06 |
Anaesthetic and respiratory equipment - Tracheobronchial tubes |
| 12/18/2023 |
Dental/
ENT |
4-315 |
Complete |
ISO |
24234 Third edition 2021-08 |
Dentistry - Dental Amalgam |
| 12/18/2023 |
Materials |
8-610 |
Complete |
ASTM |
F601-23 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 01/14/2019 |
Materials |
8-483 |
Complete |
ASTM |
F601-18 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 12/18/2023 |
InVitro Diagnostics |
7-318 |
Complete |
CLSI |
EP25 2nd Edition |
Evaluation of Stability of In Vitro Medical Laboratory Test Reagents |
| 05/29/2023 |
Nanotechnology |
18-23 |
Complete |
ASTM |
E3025-22 |
Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
| 12/18/2023 |
Sterility |
14-594 |
Complete |
ISO |
11607-1 Second edition 2019-02 [Including AMD1:2023] |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems [Including Amendment 1 (2023)] |
| 07/15/2019 |
Sterility |
14-530 |
Complete |
ISO |
11607-1 Second edition 2019-02 |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ANSI AAMI ISO |
11607-1:2019 |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| 04/04/2016 |
Dental/
ENT |
4-224 |
Complete |
ISO |
24234 Second edition 2015-05-01 |
Dentistry - Dental Amalgam |
| 12/18/2023 |
Dental/
ENT |
4-316 |
Complete |
ISO |
20127 Second edition 2020-08 |
Dentistry - Physical properties of powered toothbrushes |
| ANSI ADA |
Standard No.120-2022 |
Dentistry - Physical Properties of Powered Toothbrushes |
| 09/17/2018 |
Dental/
ENT |
4-244 |
Complete |
ISO |
8325 Second edition 2004-09-15 |
Dentistry - Test methods for rotary instruments |
| 12/18/2023 |
Dental/
ENT |
4-318 |
Complete |
ISO |
20749 Second edition 2023-06 |
Dentistry - Pre-capsulated dental amalgam |
| 09/17/2018 |
Dental/
ENT |
4-246 |
Complete |
ISO |
20749 First edition 2017-03 |
Dentistry - Pre-capsulated dental amalgam |
| ANSI ADA |
Standard No. 144-2018 |
Alloy for Dental Amalgam |
| 12/18/2023 |
Sterility |
14-597 |
Complete |
AAMI ANSI |
ST108:2023 |
Water for the processing of medical devices |
| 05/29/2023 |
Physical Medicine |
16-234 |
Complete |
ISO |
7176-14 Third Edition 2022 |
Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
| 05/29/2023 |
Biocompatibility |
2-300 |
Complete |
ISO |
10993-2 Third edition 2022-11 |
Biological Evaluation of medical devices - Part 2: Animal welfare requirements |
| 10/09/2023 |
Software/
Informatics |
13-129 |
Complete |
ISO IEC IEEE |
29119-1 Second edition 2022-01 |
Software and systems engineering - Software testing - Part 1: General concepts |
| 12/18/2023 |
Dental/
ENT |
4-312 |
Complete |
ANSI ASA |
S3.35-2021 |
American National Standard Method for Measurement of Performance Characteristics of Hearing Aids Under Simulated Real-Ear Working Conditions |
| 04/04/2016 |
Dental/
ENT |
4-190 |
Complete |
ANSI ASA |
S3.35-2010 (Reaffirmed 2020) |
American National Standard Method for Measurement of Performance Characteristics of Hearing Aids under Simulated Real-Ear Working Conditions |
| 05/29/2023 |
Physical Medicine |
16-235 |
Complete |
ISO |
7176-25 Second Edition 2022 |
Wheelchairs - Part 25: Lead-acid batteries and chargers for powered wheelchairs - Requirements and test methods |
| 10/09/2023 |
Software/
Informatics |
13-130 |
Complete |
ANSI AAMI |
2700-2-1:2022 |
Medical devices and medical systems - Essential safety and performance requirements for equipment comprising the patient-centric integrated clinical environment (ICE): Part 2-1: Particular requirements for forensic data logging |
| 01/27/2015 |
Sterility |
14-242 |
Complete |
ISO |
14644-3 First edition 2005-12-15 |
Cleanrooms and associated controlled environments - Part 3: Test methods |
| 05/29/2024 |
Sterility |
14-599 |
Complete |
ISO |
14644-9 Second edition 2022-05 |
Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration |
| 01/27/2015 |
Sterility |
14-389 |
Complete |
ISO |
14644-9 First edition 2012-08-15 |
Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration |
| 12/18/2023 |
Orthopedic |
11-407 |
Complete |
ASTM |
F3140-23 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
| 09/11/2023 |
Orthopedic |
11-400 |
Complete |
ISO |
21536 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants |
| 08/06/2013 |
Software/
Informatics |
13-52 |
Complete |
ISO IEEE |
11073-10408 First edition 2010-05-01 |
Health informatics - Point-of-care medical device communication - Part 10408: Device specialization - Thermometer |
| 05/29/2024 |
Software/
Informatics |
13-133 |
Complete |
ISO IEEE |
11073-10415 Second edition 2022-12 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| 01/27/2015 |
Orthopedic |
11-281 |
Complete |
ASTM |
F1672-14 (Reapproved 2019) |
Standard Specification for Resurfacing Patellar Prosthesis |
| 06/07/2021 |
Orthopedic |
11-377 |
Complete |
ASTM |
F2083-21 |
Standard Specification for Knee Replacement Prosthesis |
| 07/15/2019 |
Orthopedic |
11-352 |
Complete |
ISO |
14242-1 Third edition 2014-10-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test [Including AMENDMENT 1 (2018)] |
| 01/14/2019 |
Dental/
ENT |
4-217 |
Complete |
ANSI ASA |
S3.36-2012 (Reaffirmed 2022) |
American National Standard Specification for a Manikin for Simulated in-situ Airborne Acoustic Measurements |
| 12/20/2021 |
Orthopedic |
11-393 |
Complete |
ASTM |
F2724-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
| 12/20/2021 |
Orthopedic |
11-390 |
Complete |
ISO |
23089-2 First edition 2021-05 |
Implants for surgery - Preclinical mechanical assessment of spinal implants and particular requirements - Part 2: Spinal intervertebral body fusion devices |
| 12/20/2021 |
Orthopedic |
11-385 |
Complete |
ASTM |
F2345-21 |
Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads |
| 12/20/2021 |
Orthopedic |
11-386 |
Complete |
ASTM |
F2665-21 |
Standard Specification for Total Ankle Replacement Prosthesis |
| 05/29/2024 |
Anesthesiology |
1-174 |
Complete |
ISO |
18562-2 Second edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-499 |
Complete |
ISO |
10555-1 Third edition 2023-11 |
Intravascular catheters - Sterile and single-use intravascular catheters - Part 1: General requirements |
| 12/19/2022 |
Physical Medicine |
16-233 |
Complete |
ISO |
16840-10 Second edition 2021-06 Corrected version 2022-01 |
Wheelchair seating - Part 10: Resistance to ignition of postural support devices - Requirements and test method |
| 05/29/2023 |
Materials |
8-600 |
Complete |
ASTM |
F1978-22 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 08/21/2017 |
Dental/
ENT |
4-238 |
Complete |
ISO |
20127 First edition 2005-03-15 |
Dentistry - Powered toothbrushes - General requirements and test methods |
| ANSI ADA |
Standard No.120-2009 (R2014) |
Powered Toothbrushes |
| 07/15/2019 |
Sterility |
14-531 |
Complete |
ISO |
11607-2 Second edition 2019-02 |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| ANSI AAMI ISO |
11607-2:2019 |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| 12/18/2023 |
Sterility |
14-596 |
Complete |
ASTM |
F88/F88M-23 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
| 01/27/2015 |
Materials |
8-171 |
Complete |
ASTM |
F1609-08 (Reapproved 2014) |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 12/18/2023 |
Materials |
8-606 |
Complete |
ASTM |
F2537-23 |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 12/18/2023 |
Sterility |
14-590 |
Complete |
ISO |
14644-8 Third edition 2022-06 |
Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) |
| 01/27/2015 |
Sterility |
14-379 |
Complete |
ISO |
14644-8 Second edition 2013-02-15 |
Cleanrooms and associated controlled environments - Part 8: Classification of air cleanliness by chemical concentration (ACC) |
| 12/18/2023 |
Dental/
ENT |
4-317 |
Complete |
ISO |
8325 Third edition 2023-03 |
Dentistry - Test methods for rotary instruments |
| 12/18/2023 |
InVitro Diagnostics |
7-319 |
Complete |
CLSI |
M23 6th Edition |
Development of In Vitro Susceptibility Test Methods, Breakpoints, and Quality Control Parameters |
| 12/21/2020 |
InVitro Diagnostics |
7-304 |
Complete |
CLSI |
M23 5th Edition |
Development of In Vitro Susceptibility Testing Criteria and Quality Control Parameters |
| 09/17/2018 |
Materials |
8-412 |
Complete |
ASTM |
F2537-06 (Reapproved 2017) |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 12/18/2023 |
Materials |
8-607 |
Complete |
ASTM |
F2082/F2082M-23 |
Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 01/27/2015 |
Sterility |
14-390 |
Complete |
ISO |
14644-10 First edition 2013-03-01 |
Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration |
| 12/18/2023 |
Sterility |
14-592 |
Complete |
ISO |
13408-1 Third edition 2023-08 |
Aseptic processing of health care products - Part 1: General requirements |
| 08/06/2013 |
Software/
Informatics |
13-57 |
Complete |
ISO IEEE |
11073-10407 First edition 2010-05-01 |
Health informatics - Personal health device communication - Part 10407: Device Specialization - Blood pressure monitor |
| IEEE |
Std 11073-10407-2008 |
Health informatics - Personal health device communication - Part 10407: Device Specialization - Blood pressure monitor |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-145 |
Complete |
ASTM |
D7661-18 |
Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| 03/18/2009 |
InVitro Diagnostics |
7-192 |
Complete |
CLSI |
MM18-A (Replaces MM18-P) |
Interpretive Criteria for Indentification of Bacteria and Fungi by DNA Target Sequencing; Approved Guideline |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-269 |
Complete |
ASTM |
F1078-10 (Reapproved 2024) |
Standard Terminology for Surgical Scissors-Inserted and Non-Inserted Blades |
| 01/30/2014 |
Dental/
ENT |
4-153 |
Complete |
ISO |
9917-1 Second edition 2007-10-01 |
Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements |
| 04/04/2016 |
Materials |
8-401 |
Complete |
ASTM |
F2118-14 (Reapproved 2020) |
Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
| 06/15/2016 |
Cardiovascular |
3-132 |
Complete |
ISO |
27185 First edition 2012-02-15 |
Cardiac Rhythm Management Devices - Symbols to be Used With Cardiac Rhythm Management Device Labels, and Information to be Supplied - General Requirements |
| ANSI AAMI ISO |
27185:2012 |
Cardiac Rhythm Management Devices -- Symbols to be Used With Cardiac Rhythm Managment Device Labels, and Information to be Supplied -- General Requirements |
| 07/15/2019 |
Anesthesiology |
1-122 |
Complete |
ISO |
5364 Fifth edition 2016-09-01 |
Anaesthetic and respiratory equipment-Oropharyngeal airways |
| 03/16/2012 |
Cardiovascular |
3-96 |
Complete |
ISO |
81060-1 First edition 2007-12-01 |
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type |
| ANSI AAMI ISO |
81060-1:2007/(R)2013 |
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type |
| 12/19/2007 |
Radiology |
12-176 |
Complete |
IEC |
61223-3-2 Second eidtion 2007-07 |
Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment |
| 03/16/2012 |
InVitro Diagnostics |
7-165 |
Complete |
CLSI |
H20-A2 (Replaces H20-A) |
Reference Leukocyte (WBC) Differential Count (Proportional) and Evaluation of Instrumental Methods; Approved Standard - Second Edition |
| 12/23/2016 |
Orthopedic |
11-311 |
Complete |
ISO |
14243-2 Third edition 2016-09-01 |
Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement |
| 03/31/2006 |
Radiology |
12-141 |
Complete |
IEEE |
N42.13-2004 |
Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-494 |
Complete |
ASTM |
F3352/F3352M-23a |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| 12/23/2016 |
Materials |
8-437 |
Complete |
ASTM |
F2082/F2082M-16 |
Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 05/29/2023 |
Physical Medicine |
16-236 |
Complete |
ISO |
7176-19 Third Edition 2022 |
Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles |
| 01/27/2015 |
Software/
Informatics |
13-70 |
Complete |
ANSI AAMI IEC |
TIR80001-2-5:2014 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
| IEC |
TR 80001-2-5 Edition 1.0 2014-12 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
| 04/04/2016 |
Physical Medicine |
16-196 |
Complete |
ISO |
7176-7 First Edition 1998-05-15 |
Wheelchairs - Part 7: Measurement of seating and wheel dimensions |
| 08/21/2017 |
Sterility |
14-502 |
Complete |
ISO |
11138-1 Third edition 2017-03 |
Sterilization of health care products - Biological indicators - Part 1: General requirements |
| ANSI AAMI ISO |
11138-1:2017 |
Sterilization of health care products - Biological indicators - Part 1: General requirements |
| 12/23/2019 |
Materials |
8-500 |
Complete |
ISO |
5832-12 Third edition 2019-02 |
Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-214 |
Complete |
ASTM |
D6355-07(2022) |
Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
