|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 12/21/2020 |
Sterility |
14-554 |
Complete |
ASTM |
F17-20 |
Standard Terminology Relating to Flexible Barrier Packaging |
| 12/21/2020 |
Tissue Engineering |
15-64 |
Partial |
ISO |
22442-1 Third edition 2020-09 |
Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management |
| 12/21/2020 |
Tissue Engineering |
15-65 |
Complete |
ISO |
22442-2 Third edition 2020-09 |
Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling |
| 06/07/2021 |
Anesthesiology |
1-151 |
Complete |
ISO |
80601-2-70 Second edition 2020-11 |
Medical electrical equipment - Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment |
| 06/07/2021 |
Biocompatibility |
2-290 |
Partial |
ISO |
TS 37137-1 First edition 2021-03 |
Biological evaluation of absorbable medical devices - Part 1: General requirements. |
| 06/07/2021 |
Biocompatibility |
2-291 |
Partial |
ISO |
10993-23 First edition 2021-01 |
Biological evaluation of medical devices - Part 23: Tests for irritation |
| 06/07/2021 |
Cardiovascular |
3-129 |
Partial |
ANSI AAMI |
EC53:2013/(R)2020 |
ECG trunk cables and patient leadwires |
| 06/07/2021 |
Cardiovascular |
3-166 |
Partial |
ISO |
81060-2 Third edition 2018-11 |
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type [Including: Amendment 1 (2020)] |
| 06/07/2021 |
Cardiovascular |
3-168 |
Partial |
IEEE |
Std 1708-2014 |
Standard for Wearable, Cuffless Blood Pressure Measuring Devices [Including: Amendment 1 (2019)] |
| 06/07/2021 |
Cardiovascular |
3-170 |
Complete |
ISO |
14708-5 Second edition 2020-05 |
Implants for surgery - Active implantable medical devices - Part 5: Circulatory support devices |
| 06/07/2021 |
Dental/
ENT |
4-273 |
Complete |
ANSI ASA |
S3.7-2016 (Reaffirmed 2023) |
American National Standard Method for Coupler Calibration of Earphones |
| 06/07/2021 |
Dental/
ENT |
4-274 |
Complete |
ANSI ASA |
S3.2-2020 |
American National Standard Method for Measuring the Intelligibility of Speech over Communication Systems |
| 06/07/2021 |
Dental/
ENT |
4-275 |
Complete |
ANSI ASA |
S3.6-2018 (Reaffirmed 2023) |
American National Standard for Specification for Audiometers |
| 06/07/2021 |
Dental/
ENT |
4-276 |
Partial |
ISO |
14457 Second edition 2017-10 |
Dentistry - Handpieces and motors |
| ANSI ADA |
Standard No. 35-2019 |
Dental Handpieces and Motors |
| 06/07/2021 |
Dental/
ENT |
4-277 |
Complete |
ANSI IEEE |
C63.19-2019 |
American National Standard Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids |
| 06/07/2021 |
Dental/
ENT |
4-278 |
Complete |
ISO |
4823 Fifth edition 2021-02 |
Dentistry - Elastomeric impression and bite registration materials |
| ANSI ADA |
Standard No. 19-2022 |
Elastomeric Impression and Bite Registration |
| 06/07/2021 |
Dental/
ENT |
4-279 |
Complete |
ANSI ADA |
Standard No. 85-2004 (R2009) |
Part 1: Disposable Prophy Angles |
| 06/07/2021 |
Dental/
ENT |
4-280 |
Partial |
ANSI ADA |
Standard No. 117-2018 |
Fluoride varnishes |
| 06/07/2021 |
Dental/
ENT |
4-281 |
Complete |
ISO |
1797 Third Edition 2017-05 |
Dentistry - Shanks for rotary and oscillating instruments |
| ANSI ADA |
Standard No. 179-2020 |
Shanks for Rotary and Oscillating Instruments |
| 06/07/2021 |
Dental/
ENT |
4-283 |
Complete |
ISO |
16409 Second edition 2016-10 |
Dentistry - Oral care products - Manual interdental brushes |
| ANSI ADA |
Standard No. 125-2018 |
Manual Interdental Brushes |
| 06/07/2021 |
General II (ES/
EMC) |
19-40 |
Complete |
IEC |
60086-4 Edition 5.0 2019-04 |
Primary batteries - Part 4: Safety of lithium batteries [Including: Corrigendum 1 (2019) and Corrigendum 2 (2020)] |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-389 |
Partial |
IEC |
60601-2-2 Edition 6.0 2017-03 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
| ANSI AAMI IEC |
60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-461 |
Complete |
IEC |
60601-2-19 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-462 |
Complete |
IEC |
60601-2-20 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-463 |
Complete |
IEC |
60601-2-21 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers |
| 06/07/2021 |
InVitro Diagnostics |
7-236 |
Partial |
CLSI |
M43-A October 2011 |
Methods for Antimicrobial Susceptibility Testing for Human Mycoplasmas; Approved Guideline |
| 06/07/2021 |
InVitro Diagnostics |
7-262 |
Partial |
CLSI |
M45 3rd Edition |
Methods for Antimicrobial Dilution and Disk Susceptibility Testing of Infrequently Isolated or Fastidious Bacteria |
| 06/07/2021 |
InVitro Diagnostics |
7-292 |
Partial |
CLSI |
M62 1st Edition |
Performance Standards for Susceptibility Testing of Mycobacteria, Nocardia spp., and other Aerobic Actinomycetes |
| 06/07/2021 |
InVitro Diagnostics |
7-306 |
Complete |
CLSI |
EP06 2nd Edition |
Evaluation of the Linearity of Quantitative Measurement Procedures |
| 06/07/2021 |
InVitro Diagnostics |
7-307 |
Complete |
CLSI |
POCT05 2nd Edition |
Performance Metrics for Continuous Interstitial Glucose Monitoring |
| 06/07/2021 |
Materials |
8-555 |
Complete |
ASTM |
F1472-20a |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| 06/07/2021 |
Materials |
8-556 |
Complete |
ASTM |
F640-20 |
Standard Test Methods for Determining Radiopacity for Medical Use |
| 06/07/2021 |
Materials |
8-557 |
Complete |
ASTM |
F3268-18a |
Standard Guide for in vitro Degradation Testing of Absorbable Metals |
| 06/07/2021 |
Materials |
8-558 |
Complete |
ASTM |
F3333-20 |
Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 06/07/2021 |
Materials |
8-560 |
Complete |
ASTM |
D1415-18 |
Standard Test Method for Rubber Property - International Hardness |
| 06/07/2021 |
Materials |
8-561 |
Complete |
ASTM ISO |
52950 First edition 2021-01 |
Additive manufacturing - General principles - Overview of data processing |
| 06/07/2021 |
Materials |
8-562 |
Complete |
ISO ASTM |
52904 First edition 2019-08 |
Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-131 |
Complete |
ISO |
8600-5 Second Edition 2020-10 |
Optics and photonics - Medical endoscopes and endotherapy devices - Part 5: Determination of optical resolution of rigid endoscopes with optics |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-132 |
Complete |
ASTM |
F623-19 |
Standard Performance Specification for Foley Catheter |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-133 |
Partial |
ISO |
23500-1 First edition 2019-02 |
Preparation and Quality Management of Fluids for Haemodialysis and Related Therapies - Part 1: General Requirements |
| ANSI AAMI ISO |
23500-1:2019 |
Preparation and Quality Management of Fluids for Haemodialysis and Related Therapies - Part 1: General Requirements |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-134 |
Complete |
ISO |
23500-2 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies |
| ANSI AAMI ISO |
23500-2:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-135 |
Complete |
ISO |
23500-3 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies |
| ANSI AAMI ISO |
23500-3:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-136 |
Complete |
ISO |
23500-4 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies |
| ANSI AAMI ISO |
23500-4:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-137 |
Complete |
ISO |
23500-5 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
| ANSI AAMI ISO |
23500-5:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-138 |
Complete |
ISO |
20695 First edition 2020-03 |
Enteral feeding systems - Design and testing |
| 06/07/2021 |
Ophthalmic |
10-122 |
Partial |
ISO |
10939 Third edition 2017-05 |
Ophthalmic instruments - Slit-lamp microscopes |
| 06/07/2021 |
Ophthalmic |
10-123 |
Partial |
ISO |
15004-1 Second edition 2020-5 |
Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments |
| 06/07/2021 |
Ophthalmic |
10-124 |
Complete |
ISO |
11979-1 Fourth edition 2018-11 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary |
| 06/07/2021 |
Ophthalmic |
10-125 |
Partial |
ISO |
11979-7 Fourth edition 2018-03 |
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia |
| 06/07/2021 |
Ophthalmic |
10-126 |
Complete |
IEC |
80601-2-58 Edition 2.0 2014-09 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
| ANSI AAMI IEC |
80601-2-58:2014 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
| 06/07/2021 |
Orthopedic |
11-376 |
Complete |
ASTM |
F2033-20 |
Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
| 06/07/2021 |
Orthopedic |
11-377 |
Complete |
ASTM |
F2083-21 |
Standard Specification for Knee Replacement Prosthesis |
| 06/07/2021 |
Orthopedic |
11-378 |
Complete |
ASTM |
F2502-17 |
Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
| 06/07/2021 |
Orthopedic |
11-379 |
Complete |
ASTM |
F2978-20 |
Standards Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging |
| 06/07/2021 |
Orthopedic |
11-380 |
Complete |
ASTM |
F2979-20 |
Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses |
| 06/07/2021 |
Orthopedic |
11-381 |
Complete |
ASTM |
F2582-20 |
Standard Test Method for Dynamic Impingement Between Femoral and Acetabular Hip Components |
| 06/07/2021 |
Orthopedic |
11-382 |
Complete |
ASTM |
F3090-20 |
Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement |
| 06/07/2021 |
Orthopedic |
11-383 |
Complete |
ASTM |
F3143-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
| 06/07/2021 |
Orthopedic |
11-384 |
Complete |
ASTM |
F3446-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator |
| 06/07/2021 |
Physical Medicine |
16-231 |
Complete |
ISO |
10328 Second edition 2016-06-01 |
Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods |
| 06/07/2021 |
Radiology |
12-335 |
Complete |
IEC |
60336 Edition 5.0 2020-12 |
Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics |
| 06/07/2021 |
Radiology |
12-336 |
Complete |
IEC |
60601-1-3 Edition 2.2 2021-01 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
| 06/07/2021 |
Radiology |
12-337 |
Complete |
NEMA |
NU 1-2018 |
Performance Measurements of Gamma Cameras |
| 06/07/2021 |
Radiology |
12-338 |
Complete |
IEC |
60601-2-1 Edition 4.0 2020-10 |
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV |
| 06/07/2021 |
Radiology |
12-339 |
Complete |
IEC |
60601-2-63 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
| 06/07/2021 |
Radiology |
12-340 |
Complete |
IEC |
60601-2-65 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral-X-ray equipment |
| 06/07/2021 |
Software/
Informatics |
13-117 |
Partial |
IEEE |
Std 11073-40101-2020 |
Health informatics - Device interoperability Part 40101: Foundational - Cybersecurity - Processes for vulnerability assessment. |
| 06/07/2021 |
Software/
Informatics |
13-118 |
Complete |
IEEE |
Std 11073-40102:2020 |
Health informatics - Device interoperability. Part 40102: Foundational - Cybersecurity - Capabilities for mitigation. |
| 06/07/2021 |
Software/
Informatics |
13-119 |
Complete |
ANSI ISA |
62443-4-1-2018 |
Security for industrial automation and control systems Part 4-1: Product security development life-cycle requirements. |
| 06/07/2021 |
Sterility |
14-562 |
Complete |
ANSI AAMI |
ST79:2017 & 2020 Amendments A1, A2, A3, A4 |
(Consolidated Text) Comprehensive guide to steam sterilization and sterility assurance in health care facilities |
| 06/07/2021 |
Tissue Engineering |
15-66 |
Complete |
ASTM |
F2260-18 |
Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1HNMR) Spectroscopy |
| 06/07/2021 |
Tissue Engineering |
15-67 |
Complete |
ASTM |
F2212-20 |
Standard Guide for Characterization of Type I Collagen as Starting Materials for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
| 12/20/2021 |
Biocompatibility |
2-292 |
Complete |
USP-NF |
M98833_01_01 |
<87> Biological Reactivity Test, In Vitro - Direct Contact Test |
| 12/20/2021 |
Biocompatibility |
2-293 |
Complete |
USP-NF |
M98833_01_01 |
<87> Biological Reactivity Test, In Vitro - Elution Test |
| 12/20/2021 |
Biocompatibility |
2-294 |
Partial |
USP-NF |
M98834_01_01 |
<88> Biological Reactivity Tests, In Vivo |
| 12/20/2021 |
Biocompatibility |
2-295 |
Partial |
USP-NF |
M98900_01_01 |
<151> Pyrogen Test (USP Rabbit Test) |
| 12/20/2021 |
Cardiovascular |
3-171 |
Complete |
ASTM |
F2514-21 |
Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading |
| 12/20/2021 |
Cardiovascular |
3-172 |
Complete |
AAMI |
TIR42:2021 |
Evaluation of Particulates Associated with Vascular Medical Devices |
| 12/20/2021 |
Cardiovascular |
3-173 |
Complete |
ISO |
5840-3 Second edition 2021-01 |
Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques |
| 12/20/2021 |
Cardiovascular |
3-174 |
Partial |
ISO |
5840-1 Second edition 2021-01 |
Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements |
| 12/20/2021 |
Cardiovascular |
3-175 |
Complete |
ISO |
5840-2 Second edition 2021-01 |
Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes |
| 12/20/2021 |
Cardiovascular |
3-176 |
Complete |
ISO |
18193 First edition 2021-08 |
Cardiovascular implants and artificial organs - Cannulae for extracorporeal circulation |
| 12/20/2021 |
Cardiovascular |
3-177 |
Complete |
ASTM |
F2606-08 (Reapproved 2021) |
Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems |
| 12/20/2021 |
Cardiovascular |
3-178 |
Complete |
ASTM |
F3067-14 (Reapproved 2021) |
Standard Guide for Radial Loading of Balloon-Expandable and Self-Expanding Vascular Stents |
| 12/20/2021 |
Cardiovascular |
3-179 |
Complete |
ASTM |
F3172-15 (Reapproved 2021) |
Standard Guide for Design Verification Device Size and Sample Size Selection for Endovascular Devices |
| 12/20/2021 |
Cardiovascular |
3-180 |
Complete |
ASTM |
F3505-21 |
Standard Test Method for Stent and Endovascular Prosthesis Kink Resistance |
| 12/20/2021 |
Dental/
ENT |
4-284 |
Complete |
ISO |
10873 Second edition 2021-07 |
Dentistry - Denture adhesives |
| 12/20/2021 |
Dental/
ENT |
4-285 |
Complete |
ANSI ADA |
Standard No. 37-1986 (R2020) |
Dental Abrasive Powders |
| 12/20/2021 |
Dental/
ENT |
4-286 |
Complete |
ANSI ADA |
Standard No. 87-1995 (R2014) |
Dental Impression Trays |
| 12/20/2021 |
Dental/
ENT |
4-287 |
Complete |
ANSI ADA |
Standard No. 116-2020 |
Oral Rinses (Modified adoption of ISO 16408:2015, Dentistry Oral Care Products -Oral Rinses) |
| 12/20/2021 |
Dental/
ENT |
4-288 |
Complete |
ISO |
7488 Second edition 2018-04 |
Dentistry - Mixing machines for dental amalgam |
| ANSI ADA |
Standard No. 43-2020 |
Electrically Powered Dental Amalgamators |
| 12/20/2021 |
Dental/
ENT |
4-289 |
Complete |
ISO |
18556 Frist edition 2016-04 |
Dentistry - Intraoral spatulas |
| 12/20/2021 |
Dental/
ENT |
4-290 |
Complete |
ISO |
28158 Second edition 2018-09 |
Dentistry - Integrated dental floss and handles |
| ANSI ADA |
Standard No. 185-2020 |
Integrated Dental Floss and Handles |
| 12/20/2021 |
Dental/
ENT |
4-291 |
Complete |
ISO |
28399 First edition 2011-01 |
Dentistry - Products for external tooth bleaching |
| ANSI ADA |
Standard No. 136-2015 (R2020) |
Products for External Tooth Bleaching |
| 12/20/2021 |
Dental/
ENT |
4-292 |
Complete |
ISO |
28888 First edition 2013-10 |
Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues |
| ANSI ADA |
Standard No. 151-2015 (R2020) |
Screening Method for Erosion Potential of Oral Rinses on Dental Hard Tissues |
| 12/20/2021 |
General I (QS/
RM) |
5-134 |
Complete |
ISO |
15223-1 Fourth edition 2021-07 |
Medical devices - Symbols to be used with information to be supplied by the manufacturer - Part 1: General requirements |
| 12/20/2021 |
General II (ES/
EMC) |
19-41 |
Complete |
ANSI UL |
61010-1 3rd Ed, dated May 12, 2012 with revision through July 19, 2019 |
Standard for Safety for Electrical Equipment For Measurement, Control and Laboratory Use; Part 1: General Requirements |
| 12/20/2021 |
General II (ES/
EMC) |
19-42 |
Partial |
IEC |
61326-1 Edition 3.0 2020-10 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| 12/20/2021 |
General II (ES/
EMC) |
19-43 |
Partial |
IEC |
61326-2-6 Edition 3.0 2020-10 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| 12/20/2021 |
General II (ES/
EMC) |
19-44 |
Complete |
IEEE ANSI |
C63.24-2021 |
American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
