|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Title of Standard
|
08/14/2015 |
Dental/ ENT |
4-220 |
Complete |
ANSI ASA |
S3.22-2014 (Reaffirmed 2020) |
American National Standard Specification of Hearing Aid Characteristics |
08/14/2015 |
General I (QS/ RM) |
5-97 |
Complete |
ANSI AAMI ISO |
80369-20:2015 |
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods |
ISO |
80369-20 First edition 2015-05-15 |
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods |
08/14/2015 |
General Plastic Surgery/ General Hospital |
6-110 |
Complete |
ASTM |
F1441-03 (Reapproved 2014) |
Standard Specification for Soft-Tissue Expander Devices |
08/14/2015 |
General Plastic Surgery/ General Hospital |
6-185 |
Complete |
ASTM |
F881-94 (Reapproved 2014) |
Standard Specification for Silicone Elastomer Facial Implants |
08/14/2015 |
General Plastic Surgery/ General Hospital |
6-200 |
Complete |
ASTM |
E1061-01(2022) |
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
08/14/2015 |
General Plastic Surgery/ General Hospital |
6-353 |
Complete |
ASTM |
F2051-00 (Reapproved 2014) |
Standard Specification for Implantable Saline Filled Breast Prosthesis |
08/14/2015 |
General Plastic Surgery/ General Hospital |
6-354 |
Complete |
ASTM |
D7907-14 (Reapproved 2019) |
Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves |
08/14/2015 |
InVitro Diagnostics |
7-251 |
Complete |
CLSI |
EP05-A3 (Reaffirmed: September 2019) |
Evaluation of Precision of Quantitative Measurement Procedures; Approved Guideline - Third Edition |
08/14/2015 |
InVitro Diagnostics |
7-252 |
Complete |
CLSI |
EP14-A3 |
Evaluation of Commutability of Processed Samples; Approved Guideline - Third Edition |
08/14/2015 |
InVitro Diagnostics |
7-253 |
Complete |
CLSI |
EP15-A3 (Reaffirmed: September 2019) |
User Verification of Precision and Estimation of Bias; Approved Guideline - Third Edition |
08/14/2015 |
InVitro Diagnostics |
7-255 |
Partial |
CLSI |
MM09-A2 (Replaces MM09-A) |
Nucleic Acid Sequencing Methods in Diagnostic Laboratory Medicine: Approved Guideline -- Second Edition |
08/14/2015 |
InVitro Diagnostics |
7-257 |
Complete |
CLSI |
M56-A |
Principles and procedures for Detection of Anaerobes in Clinical Specimens; Approved Guideline |
08/14/2015 |
Materials |
8-389 |
Complete |
ISO |
15309 First edition 2013-12-01 |
Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
08/14/2015 |
Nanotechnology |
18-4 |
Complete |
ISO |
TS 80004-6 First edition 2013-11-01 |
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization |
08/14/2015 |
Neurology |
17-4 |
Partial |
ASTM |
F647-94 (Reapproved 2014) |
Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application |
08/14/2015 |
ObGyn/ Gastroenterology/ Urology |
9-108 |
Complete |
ISO |
8009 Second edition 2014-11-15 |
Mechanical contraceptives - Reusable natural and silicone rubber contraceptive diaphragms - Requirements and tests |
08/14/2015 |
Ophthalmic |
10-94 |
Complete |
ISO |
14730 Second edition 2014-10-01 |
Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date |
08/14/2015 |
Ophthalmic |
10-95 |
Complete |
ISO |
11979-6 Third edition 2014-10-01 |
Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability testing |
08/14/2015 |
Ophthalmic |
10-96 |
Partial |
ANSI |
Z80.10-2014 |
American National Standard for Ophthalmics - Ophthalmic Instruments - Tonometers |
08/14/2015 |
Ophthalmic |
10-97 |
Complete |
ISO |
13212 Third edition 2014-09-01 |
Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life |
08/14/2015 |
Ophthalmic |
10-98 |
Complete |
ISO |
11979-2 Second edition 2014-08-15 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods |
08/14/2015 |
Ophthalmic |
10-99 |
Complete |
ISO |
4311 First edition 1979-06-01 |
Anionic and non-ionic surface active agents - Determination of critical micellization concentration - Method by measuring surface tension with a plate, stirrup, or ring |
08/14/2015 |
Orthopedic |
11-183 |
Complete |
ASTM |
F1875-98 (Reapproved 2022) |
Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface |
08/14/2015 |
Orthopedic |
11-290 |
Complete |
ISO |
8828 Second edition 2014-11-15 |
Implants for surgery -- Guidance on care and handling of orthopaedic implants |
08/14/2015 |
Orthopedic |
11-294 |
Complete |
ASTM |
F1357-14 (Reapproved 2019) |
Standard Specification for Articulating Total Wrist Implants |
08/14/2015 |
Physical Medicine |
16-194 |
Complete |
ISO |
7176-25 First edition 2013-07-15 |
Wheelchairs - Part 25: Batteries and chargers for powered wheelchairs |
08/14/2015 |
Radiology |
12-289 |
Complete |
IEC |
62220-1-1 Edition 1.0 2015-03 |
Medical electrical equipment-Characteristics of digital X-ray imaging devices Part 1-1: Determination of the detective quantum efficiencyDetectors used in radiographic imaging |
08/14/2015 |
Radiology |
12-290 |
Complete |
IEC |
61910-1 Edition 1.0 2014-09 |
Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy |
08/14/2015 |
Radiology |
12-291 |
Complete |
IEC |
62127-2 Edition 1.2 2017-03 CONSOLIDATED VERSION |
Ultrasonics -- Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz |
08/14/2015 |
Radiology |
12-292 |
Complete |
IEEE |
Std 3333.2.1-2015 |
IEEE Recommended Practice for Three-Dimensional (3D) Medical Modeling |
08/14/2015 |
Software/ Informatics |
13-73 |
Partial |
IHTSDO |
SNOMED-CT RF2 Release 2015 |
Systematized Nomenclature of Medicine - Clinical Terms |
08/14/2015 |
Software/ Informatics |
13-74 |
Complete |
IEEE |
Std 11073-10424-2014 |
Health informatics - Personal health device communication, Part 10424: Device Specialization - Sleep Apnoea Breathing Therapy Equipment (SABTE) |
08/14/2015 |
Software/ Informatics |
13-75 |
Complete |
ISO IEEE |
11073-10102 First edition 2014-03-01 |
Health informatics - Point-of-care medical device communication - Part 10102: Nomenclature - Annotated ECG |
08/14/2015 |
Software/ Informatics |
13-76 |
Complete |
ISO |
11073-91064 First edition 2009-05-01 |
Health informatics - Standard communication protocol - Computer-assisted electrocardiography |
08/14/2015 |
Software/ Informatics |
13-77 |
Complete |
ISO IEC |
29147 First edition 2014-02-15 |
Information technology - Security techniques - Vulnerability disclosure |
08/14/2015 |
Software/ Informatics |
13-78 |
Complete |
INCITS ISO IEC |
30111 First edition 2013-11-01 (R2019) |
Information technology - Security techniques - Vulnerability handling processes |
08/14/2015 |
Sterility |
14-460 |
Partial |
ANSI AAMI ISO |
11140-1:2014 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
ISO |
11140-1 Third edition 2014-11-01 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
08/14/2015 |
Sterility |
14-463 |
Complete |
ISO ASTM |
51608 Second edition 2015-03-15 |
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 KeV and 7.5 MeV |
08/14/2015 |
Sterility |
14-464 |
Complete |
ISO ASTM |
51649 Third edition 2015-03-15 |
Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV |
08/14/2015 |
Sterility |
14-465 |
Complete |
ISO ASTM |
51707 Third edition 2015-03-15 |
Guide for estimating uncertainties in dosimetry for radiation processing |
06/27/2015 |
Sterility |
14-484 |
Complete |
ASTM |
F1929-15 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
01/27/2015 |
Dental/ ENT |
4-136 |
Complete |
ASTM |
F2504-05 (Reapproved 2022) |
Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices |
01/27/2015 |
Dental/ ENT |
4-185 |
Complete |
ANSI ASA |
S3.45-2009 (Reaffirmed 2019) |
American National Standard Procedures for Testing Basic Vestibular Function |
01/27/2015 |
Dental/ ENT |
4-218 |
Complete |
ANSI ADA |
Standard No.100-2012 |
Orthodontic Brackets and Tubes |
ISO |
27020 First edition 2010-12-15 |
Dentistry - Brackets and tubes for use in orthodontics |
01/27/2015 |
Dental/ ENT |
4-219 |
Complete |
ISO |
29022 First edition 2013-06-01 |
Dentistry - Adhesive - Notched-edge sheer bond strength test |
01/27/2015 |
General I (QS/ RM) |
5-48 |
Complete |
ANSI |
Z1.9-2003 (R2018) |
Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming |
01/27/2015 |
General I (QS/ RM) |
5-62 |
Complete |
ANSI ASQ |
Z1.4-2003 (R2018) |
Sampling Procedures and Tables for Inspection by Attributes |
01/27/2015 |
InVitro Diagnostics |
7-250 |
Partial |
CLSI |
M40-A2 (Reaffirmed: September 2019) |
Quality Control of Microbiological Transport Systems; Approved Standard - Second Edition. |
01/27/2015 |
Materials |
8-171 |
Complete |
ASTM |
F1609-08 (Reapproved 2014) |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
01/27/2015 |
Materials |
8-383 |
Complete |
ASTM |
F1926/F1926M-14 |
Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings |
01/27/2015 |
Nanotechnology |
18-3 |
Partial |
ISO |
TS 14101 First edition 2012-11-01 |
Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method |
01/27/2015 |
Neurology |
17-13 |
Complete |
IEEE |
Std 2010-2012 |
Recommended Practice for Neurofeedback Systems |
01/27/2015 |
ObGyn/ Gastroenterology/ Urology |
9-45 |
Complete |
ASTM |
F2528-06(2023) |
Standard Test Methods for Enteral Feeding Devices with a Retention Balloon |
01/27/2015 |
Ophthalmic |
10-91 |
Complete |
ISO |
11979-10 First edition 2006-08-15 |
Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses [Including: Amendment 1 (2014)] |
01/27/2015 |
Orthopedic |
11-281 |
Complete |
ASTM |
F1672-14 (Reapproved 2019) |
Standard Specification for Resurfacing Patellar Prosthesis |
01/27/2015 |
Orthopedic |
11-283 |
Complete |
ASTM |
F2943-14 (Reapproved 2019) |
Standard Guide for Presentation of End User Labeling Information for Orthopedic Implants Used in Joint Arthroplasty |
01/27/2015 |
Radiology |
12-230 |
Complete |
NEMA |
XR 24-2008 (R2014) |
Primary user controls for interventional angiography x-ray equipment |
01/27/2015 |
Radiology |
12-285 |
Complete |
IEC |
60601-2-1 Edition 3.1 2014-07 |
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV |
01/27/2015 |
Radiology |
12-286 |
Complete |
NEMA |
XR 27 Amendment 1-2013 |
X-ray equipment for interventional procedures - User Quality Control Mode |
01/27/2015 |
Software/ Informatics |
13-70 |
Complete |
ANSI AAMI IEC |
TIR80001-2-5:2014 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
IEC |
TR 80001-2-5 Edition 1.0 2014-12 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
01/27/2015 |
Software/ Informatics |
13-71 |
Partial |
RII |
Version 2.48 |
Logical Observation Identifiers Names and Codes (LOINC) |
01/27/2015 |
Software/ Informatics |
13-72 |
Complete |
IEEE |
Std 11073-10425-2014 |
Health informatics - Personal health device communication, Part 10425: Device Specialization - Continuous Glucose Monitor (CGM) |
01/27/2015 |
Sterility |
14-141 |
Complete |
ISO |
14644-4 First edition 2001-04-01 |
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up |
01/27/2015 |
Sterility |
14-165 |
Complete |
ISO |
14644-5 First edition 2004-08-15 |
Cleanrooms and associated controlled environments - Part 5: Operations |
01/27/2015 |
Sterility |
14-166 |
Complete |
ISO |
14644-7 First edition 2004-10-01 |
Cleanrooms and associated controlled environments - Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) |
01/27/2015 |
Sterility |
14-242 |
Complete |
ISO |
14644-3 First edition 2005-12-15 |
Cleanrooms and associated controlled environments - Part 3: Test methods |
01/27/2015 |
Sterility |
14-243 |
Complete |
ISO |
14644-6 First edition 2007-07-15 |
Cleanrooms and associated controlled environments - Part 6: Vocabulary |
01/27/2015 |
Sterility |
14-379 |
Complete |
ISO |
14644-8 Second edition 2013-02-15 |
Cleanrooms and associated controlled environments - Part 8: Classification of air cleanliness by chemical concentration (ACC) |
01/27/2015 |
Sterility |
14-389 |
Complete |
ISO |
14644-9 First edition 2012-08-15 |
Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration |
01/27/2015 |
Sterility |
14-390 |
Complete |
ISO |
14644-10 First edition 2013-03-01 |
Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration |
01/27/2015 |
Sterility |
14-456 |
Complete |
ANSI AAMI ISO |
TIR16775:2014 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
ISO |
/TS 16775 First edition 2014-05-15 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
10/17/2014 |
ObGyn/ Gastroenterology/ Urology |
9-95 |
Partial |
CEN |
EN 1615:2000 |
Enteral Feeding Catheters and Enteral Giving Sets for Single Use and their Connectors-Design and Testing |
07/09/2014 |
Anesthesiology |
1-99 |
Complete |
ASTM |
G175-13 (Reapproved 2021) |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
07/09/2014 |
Anesthesiology |
1-100 |
Complete |
CGA |
V-1:2013 |
Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connection |
07/09/2014 |
Anesthesiology |
1-101 |
Complete |
CGA |
C-9:2013 |
Standard Color Marking of Compressed Gas Containers for Medical Use |
07/09/2014 |
Dental/ ENT |
4-97 |
Complete |
ANSI ADA |
Standard No. 57-2000 (R2012) |
Endodontic Sealing Material |
07/09/2014 |
Dental/ ENT |
4-149 |
Complete |
ANSI ADA |
Standard No. 39-2006 (R2011) |
Pit and Fissure Sealants |
07/09/2014 |
Dental/ ENT |
4-160 |
Complete |
ANSI ASA |
S3.1-1999 (Reaffirmed 2023) |
American National Standard Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms |
07/09/2014 |
Dental/ ENT |
4-165 |
Complete |
ANSI ASA |
S3.13-1987 (Reaffirmed 2020) |
American National Standard Mechanical Coupler for Measurement of Bone Vibrators |
07/09/2014 |
Dental/ ENT |
4-177 |
Complete |
ANSI ASA |
S12.65-2006 (Reaffirmed 2020) |
American National Standard For Rating Noise with Respect to Speech Interference |
07/09/2014 |
Dental/ ENT |
4-211 |
Complete |
ANSI ASA |
S3.46-2013 (Reaffirmed 2023) |
American National Standard Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids |
07/09/2014 |
General I (QS/ RM) |
5-88 |
Complete |
ISO |
2859-1 Second edition 1999-11-15 |
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection [Including: Technical Corrigendum 1 (2001), Amendment 1 (2011)] |
07/09/2014 |
General II (ES/ EMC) |
19-4 |
Complete |
ANSI AAMI |
ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text) |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD) |
07/09/2014 |
General II (ES/ EMC) |
19-9 |
Complete |
IEC |
60601-1-10 Edition 1.1 2013-11 |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
07/09/2014 |
General II (ES/ EMC) |
19-10 |
Complete |
UL |
1642 5th Edition |
Lithium Batteries |
07/09/2014 |
General II (ES/ EMC) |
19-11 |
Complete |
UL |
2054 2nd Edition |
Household and Commercial Batteries |
07/09/2014 |
InVitro Diagnostics |
7-48 |
Complete |
CLSI |
C60-A |
Blood Alcohol Testing in the Clinical Laboratory; Approved Guideline |
07/09/2014 |
InVitro Diagnostics |
7-175 |
Complete |
CLSI |
C59-A |
Apoplipoprotein Immunoassays: Development and Recommended Performance Characteristics; Approved Guideline |
07/09/2014 |
InVitro Diagnostics |
7-213 |
Complete |
CLSI |
GP44-A4 (Formerly H18-A4) |
Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests; Approved Guideline-Fourth Edition |
07/09/2014 |
InVitro Diagnostics |
7-221 |
Complete |
CLSI |
GP39-A6 (Formerly H01-A6) |
Tubes and Additives for Venous Blood Specimen Collection; Approved Standard-Sixth Edition |
07/09/2014 |
Materials |
8-377 |
Complete |
ASTM |
F136-13 |
Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
07/09/2014 |
Materials |
8-378 |
Complete |
ASTM |
D792-13 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
07/09/2014 |
Materials |
8-379 |
Complete |
ISO |
11542-2 First edition 1998-11-15 |
Plastics - Ultra-high-molecular-weight polyethyelene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties [Including: Technical Corrigendum 1 (2007)] |
07/09/2014 |
ObGyn/ Gastroenterology/ Urology |
9-94 |
Complete |
ISO |
8600-4 Second Edition 2014-03-15 |
Endoscopes - Medical endoscopes and certain accessories - Part 4: Determination of maximum width of insertion portion |
07/09/2014 |
Orthopedic |
11-276 |
Complete |
ASTM |
F1798-13 |
Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
07/09/2014 |
Orthopedic |
11-277 |
Complete |
ISO |
7206-6 Second edition 2013-11-15 |
Implants for surgery - Partial and total hip joint prostheses - Part 6: Determination of endurance properties of head and neck region of stemmed femoral components |
07/09/2014 |
Radiology |
12-194 |
Complete |
ANSI HPS |
N43.6-2007 (R2013) |
Sealed Radioactive Sources - Classification |
07/09/2014 |
Radiology |
12-272 |
Complete |
IEC |
60601-2-17 Edition 3.0 2013-11 |
Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment |
07/09/2014 |
Radiology |
12-273 |
Complete |
IEC |
60825-1 Edition 2.0 2007-03 |
Safety of laser products - Part 1: Equipment classification, and requirements [Including: Technical Corrigendum 1 (2008), Interpretation Sheet 1 (2007), Interpretation Sheet 2 (2007)] |
07/09/2014 |
Radiology |
12-275 |
Complete |
IEC |
61161 Edition 3.0 2013-01 |
Ultrasonics -- Power measurement -- Radiation force balances and performance requirements |