|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 03/16/2012 |
Radiology |
12-241 |
Complete |
IEC |
62274 First Edition 2005-05 |
Medical electrical equipment - Safety of radiotherapy record and verify systems |
| 08/06/2013 |
Radiology |
12-253 |
Complete |
IEC |
60976 Edition 2.0 2007-10 |
Medical electrical equipment - Medical electron accelerators - Functional performance characteristics |
| 08/06/2013 |
Radiology |
12-255 |
Complete |
IEC |
60601-2-11 Edition 3.0 2013-01 |
Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment |
| 09/09/2024 |
Sterility |
14-604 |
Complete |
ISO |
11737-3 First Edition 2023-06 |
Sterilization of health care products - Microbiological methods - Part 3: Bacterial endotoxin testing |
| 12/21/2020 |
Dental/
ENT |
4-272 |
Complete |
ANSI ADA |
Standard No. 63-2013 |
Root Canal Barbed Broaches and Rasps |
| 01/27/2015 |
Neurology |
17-13 |
Complete |
IEEE |
Std 2010-2012 |
Recommended Practice for Neurofeedback Systems |
| 07/09/2014 |
Radiology |
12-283 |
Complete |
ISO |
12609-2 First edition 2013-07-15 |
Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications -- Part 2: Guidance for use |
| 03/14/2011 |
Radiology |
12-226 |
Complete |
IEC |
61223-2-6 Second Edition 2006-11 |
Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment |
| 03/16/2012 |
Radiology |
12-105 |
Complete |
NEMA |
UD 2-2004 (R2009) |
Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment Revision 3 |
| 04/04/2016 |
Sterility |
14-333 |
Complete |
ISO |
17665-1 First edition 2006-08-15 |
Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ANSI AAMI ISO |
17665-1:2006/(R)2013 |
Sterilization of health care products -- Moist heat -- Part 1: Requirements for the development, validation, and routine control of a sterilization process for medical devices |
| 01/14/2019 |
Dental/
ENT |
4-251 |
Complete |
ISO |
6872 Fourth edition 2015-06-01 [including AMENDMENT 1 2018-04] |
Dentistry - Ceramic materials |
| ANSI ADA |
Standard No. 69-2020 |
Dental Ceramic |
| 12/23/2024 |
Dental/
ENT |
4-330 |
Complete |
ANSI ADA |
Standard No. 63-2020 |
Endodontic Instruments - Auxillary |
| 07/15/2019 |
Materials |
8-510 |
Complete |
ASTM |
F997-18 |
Standard Specification for Polycarbonate Resin for Medical Applications |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-127 |
Complete |
ISO CIE |
11664-4 First edition 2019-06 |
Colorimetry - Part 4: CIE 1976 L*a*b* colour space |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-488 |
Complete |
ASTM |
F1671/F1671M-22 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| 05/29/2024 |
Materials |
8-611 |
Complete |
ISO |
9584 Second edition 2023-10 |
Implants for surgery - Non-destructive testing - Radiographic examination of cast metallic surgical implants |
| 12/23/2016 |
General I (QS/
RM) |
5-113 |
Complete |
ASTM |
D7386-16 |
Standard Practice for Performance Testing of Packages for Single Delivery Systems |
| 01/27/2015 |
Sterility |
14-165 |
Complete |
ISO |
14644-5 First edition 2004-08-15 |
Cleanrooms and associated controlled environments - Part 5: Operations |
| 07/09/2014 |
Sterility |
14-257 |
Complete |
ASTM |
D3078-02 (Reapproved 2021)e1 |
Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission |
| 08/06/2013 |
Sterility |
14-383 |
Complete |
ISO ASTM |
51702 Third edition 2013-04-15 |
Practice for dosimetry in a gamma facility for radiation processing |
| 08/21/2017 |
Biocompatibility |
2-246 |
Complete |
ASTM |
F1877-16 |
Standard Practice for Characterization of Particles |
| 12/22/2025 |
Cardiovascular |
3-202 |
Complete |
IEC |
60601-2-34 Edition 4.0 2024-10 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
| 12/23/2024 |
Radiology |
12-362 |
Complete |
IEC |
61674 Edition 3.0 2024-07 |
Medical electrical equipment -- Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| 05/29/2024 |
Materials |
8-612 |
Complete |
ASTM |
F899-23 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| 07/06/2020 |
Materials |
8-527 |
Complete |
ASTM |
F899-20 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| 05/29/2024 |
Materials |
8-613 |
Complete |
ASTM |
F2527-24 |
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants |
| 05/29/2024 |
Materials |
8-614 |
Complete |
ASTM |
F3456-22 |
Standard Guide for Powder Reuse Schema in Powder Bed Fusion Processes for Medical Applications for Additive Manufacturing Feedstock Materials |
| 05/29/2024 |
Materials |
8-615 |
Complete |
ISO ASTM |
52926-1 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 1: General qualification of operators |
| 12/18/2023 |
Biocompatibility |
2-302 |
Complete |
ASTM |
F981-23 |
Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-322 |
Complete |
ISO |
10555-4 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 4: Balloon dilatation catheters |
| 03/16/2012 |
Anesthesiology |
1-75 |
Complete |
ISO |
5362 Fourth edition 2006-06-01 |
Anaesthetic Reservoir Bags |
| ANSI AAMI ISO |
5362:2006 |
Anaesthetic Reservoir Bags |
| 12/23/2024 |
Anesthesiology |
1-183 |
Complete |
ASTM |
G175-24 |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 05/29/2024 |
Anesthesiology |
1-171 |
Complete |
ISO |
5367 Sixth edition 2023-07 |
Anaesthetic and respiratory equipment - Breathing sets and connectors |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-501 |
Complete |
ISO |
15747 Third edition 2018-09 |
Plastic containers for intravenous injections |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-500 |
Complete |
IEC |
63045 Edition 1.0 2020-05 |
Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields |
| 12/19/2022 |
Anesthesiology |
1-154 |
Complete |
ASME |
PVHO-1-2019 |
Safety Standard for Pressure Vessels for Human Occupancy |
| 12/23/2024 |
Anesthesiology |
1-182 |
Complete |
ISO |
5362 Fifth edition 2024-07 |
Anaesthetic and respiratory equipment - Anaesthetic reservoir bags |
| 10/07/2024 |
Anesthesiology |
1-180 |
Complete |
NFPA |
99:2024 |
Health Care Facilities Code |
| 12/19/2022 |
Anesthesiology |
1-153 |
Complete |
NFPA |
99:2021 |
Health Care Facilities Code |
| 07/09/2014 |
Dental/
ENT |
4-97 |
Complete |
ANSI ADA |
Standard No. 57-2000 (R2012) |
Endodontic Sealing Material |
| 08/14/2015 |
Anesthesiology |
1-103 |
Complete |
ISO |
5367 Fifth edition 2014-10-15 |
Anaesthetic and respiratory equipment - Breathing sets and connectors |
| 01/14/2019 |
InVitro Diagnostics |
7-286 |
Complete |
CLSI |
M11 9th Edition |
Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria; Approved Standard-Eighth Edition. |
| 01/14/2019 |
Materials |
8-489 |
Complete |
ASTM |
F3302-18 |
Standard for Additive Manufacturing - Finished Part Properties - Standard Specification for Titanium Alloys via Powder Bed Fusion |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-68 |
Complete |
ISO |
23409 First edition 2011-02-15 |
Male Condoms - Requirements and test methods for condoms made from synthetic materials |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-111 |
Complete |
ISO |
4074 Third edition 2015-10-15 |
Natural latex rubber condoms - Requirements and test methods |
| 05/29/2023 |
Dental/
ENT |
4-307 |
Complete |
ISO |
13504 First edition 2012-07 |
Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment |
| 05/29/2023 |
Dental/
ENT |
4-308 |
Complete |
ISO |
14708-7 Second edition 2019-12 |
Implants for surgery - Active implantable medical devices - Part 7: Particular requirements for cochlear and auditory brainstem implant systems |
| 12/23/2024 |
Anesthesiology |
1-186 |
Complete |
ISO |
80601-2-80 Second edition 2024-08 |
Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency |
| 12/04/2017 |
Software/
Informatics |
13-102 |
Complete |
IEC |
TR 80001-2-8 Edition 1.0 2016-05 |
Application of risk management for IT-networks incorporating medical devices - Part 2-8: Application guidance - Guidance on standards for establishing the security capabilities identified in IEC TR 80001-2-2 |
| 04/04/2016 |
General II (ES/
EMC) |
19-17 |
Complete |
IEEE ANSI |
C63.18-2014 |
American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF Transmitters |
| 07/15/2019 |
Orthopedic |
11-355 |
Complete |
ISO |
15142-1 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails |
| 12/23/2024 |
Orthopedic |
11-419 |
Complete |
ASTM |
F3690-24 |
Standard Test Method for Evaluating Suture Anchor Insertion and Pull Displacement Resistance |
| 12/23/2024 |
Software/
Informatics |
13-141 |
Complete |
ISO IEEE |
11073-10701 First Edition, 2024-09 |
Health Informatics - Device Interoperability - Part 10701: Point-of-Care Medical Device Communication - Metric Provisioning by Participants in a Service-Oriented Device Connectivity (SDC) System |
| IEEE |
Std 11073-10701-2022 |
Health informatics - Device interoperability Part 10701: Point-of-care medical device communication - Metric provisioning by participants in a Service-oriented Device Connectivity (SDC) system |
| 12/23/2019 |
Dental/
ENT |
4-260 |
Complete |
ANSI ASA |
S12.2-2019 (Reaffirmed 2023) |
American National Standard for Criteria for Evaluating Room Noise |
| 07/15/2019 |
Ophthalmic |
10-118 |
Complete |
ANSI |
Z80.38-2017 (R2021) |
American National Standard for Ophthalmics - Light Hazard from Operation Microscopes Used in Ocular Surgery |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-502 |
Complete |
ISO |
23217 First Edition 2024-02 |
Injection systems for self-administration by paediatric patients - Requirements and guidelines for design |
| 12/23/2024 |
Anesthesiology |
1-184 |
Complete |
ISO |
80601-2-55 Second edition 2018-02 [Including AMD1:2023] |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitor [Including Amendment 1 (2023)]. |
| 12/23/2024 |
Anesthesiology |
1-190 |
Complete |
ISO |
9360-1 First edition 2000-03 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| 12/23/2024 |
Anesthesiology |
1-191 |
Complete |
ISO |
9360-2 First edition 2001-07 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| 01/14/2019 |
Tissue Engineering |
15-56 |
Complete |
ASTM |
F3224-17 |
Standard Test Method for Evaluating Growth of Engineered Cartilage Tissue using Magnetic Resonance Imaging |
| 08/21/2017 |
General II (ES/
EMC) |
19-25 |
Complete |
IEC |
62485-1 Edition 1.0 2015-04 |
Safety requirements for secondary batteries and battery installations - Part 1: General safety information. |
| 08/21/2017 |
General II (ES/
EMC) |
19-27 |
Complete |
IEC |
62485-3 Edition 2.0 2014-07 |
Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
| 04/04/2016 |
Nanotechnology |
18-1 |
Complete |
ASTM |
E2490-09 (Reapproved 2021) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
| 05/29/2024 |
Cardiovascular |
3-192 |
Complete |
ISO |
22679 First edition 2021-11 |
Cardiovascular implants - Transcatheter cardiac occluders
|
| 07/09/2014 |
Anesthesiology |
1-99 |
Complete |
ASTM |
G175-13 (Reapproved 2021) |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 12/23/2019 |
Materials |
8-494 |
Complete |
ISO |
6474-1 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina |
| 05/26/2025 |
InVitro Diagnostics |
7-334 |
Complete |
CLSI |
AUTO05-A |
Laboratory Automation: Electromechanical Interfaces; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-335 |
Complete |
CLSI |
POCT01-A2 |
Point-of-Care Connectivity - Second Edition |
| 12/21/2020 |
Materials |
8-552 |
Complete |
ASTM |
F3434-20 |
Guide for Additive manufacturing - Installation/Operation and Performance Qualification (IQ/OQ/PQ) of Laser-Beam Powder Bed Fusion Equipment for Production Manufacturing |
| 01/14/2019 |
InVitro Diagnostics |
7-178 |
Complete |
CLSI |
M22-A3 Vol 24 No. 19 Replaces M22-A2 Vol. 16 No. 16 |
Quality Control for Commercially Prepared Microbiological Culture Media; Approved Standard - Third Edition |
| 01/14/2019 |
InVitro Diagnostics |
7-232 |
Complete |
CLSI |
MM05-A2 Vol. 32 No. 6 Replaces MM05-A Vol. 23 No. 17 |
Nucleic Acid Amplification Assays for Molecular Hematopathology; Approved Guideline - Second Edition |
| 01/30/2014 |
Software/
Informatics |
13-63 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-4:2012 |
Application of risk management for IT-networks incorporating medical devices - Part 2-4: General implementation guidance for healthcare delivery organizations |
| IEC |
TR 80001-2-4 Edition 1.0 2012-11 |
Application of risk management for IT-networks incorporating medical devices -- Part 2-4: Application guidance - General implementation guidance for healthcare delivery organization |
| 12/22/2025 |
Dental/
ENT |
4-364 |
Complete |
ISO |
3990 First edition 2023-07 |
Dentistry - Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials |
| 06/07/2021 |
Orthopedic |
11-376 |
Complete |
ASTM |
F2033-20 |
Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
| 12/23/2019 |
Materials |
8-498 |
Complete |
ASTM |
F75-18 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| 12/22/2025 |
Materials |
8-636 |
Complete |
ASTM |
F688-25 |
Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-441 |
Complete |
ISO |
7886-3 Second edition 2020-05 |
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization |
| 07/06/2020 |
Orthopedic |
11-364 |
Complete |
ISO |
14243-1 Second edition 2009-11-15 |
Implants for surgery - Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test [Including AMENDMENT1 (2020)] |
| 01/14/2019 |
Nanotechnology |
18-8 |
Complete |
ASTM |
E2578-07 (Reapproved 2022) |
Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions |
| 01/14/2019 |
Radiology |
12-322 |
Complete |
NEMA |
MS 5-2018 |
Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging |
| 05/26/2025 |
InVitro Diagnostics |
7-336 |
Complete |
CLSI |
LIS02-A2 |
Standard Specification for Transferring Information Between Clinical Instruments and Computer Systems; Approved Standard-Second Edition. |
| 01/14/2019 |
Anesthesiology |
1-138 |
Complete |
ISO |
80601-2-74 First edition 2017-05 |
Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
| 07/15/2019 |
Dental/
ENT |
4-258 |
Complete |
ISO |
10139-2 Third edition 2016-06-15 |
Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use |
| ANSI ADA |
Standard No. 160-2020 |
Soft Lining Materials for Removable Dentures - Part 2: Materials for Long-Term Use |
| 07/06/2020 |
Radiology |
12-332 |
Complete |
IEC |
62464-1 Edition 2.0 2018-12 |
Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters. |
| 07/06/2020 |
Radiology |
12-334 |
Complete |
AAMI |
RT3:2020 |
Radiation therapy machine characterization |
| 07/06/2020 |
Radiology |
12-325 |
Complete |
NEMA |
Standards Publication XR 25 -2019 |
Computed Tomography Dose Check |
| 12/23/2019 |
Dental/
ENT |
4-261 |
Complete |
ISO |
7405 Third edition 2018-10 Corrected version 2018-12 |
Dentistry - Evaluation of biocompatibility of medical devices used in dentistry |
| 12/23/2019 |
Orthopedic |
11-361 |
Complete |
ISO |
14243-5 First edition 2019-05 |
Implants for surgery - Wear of total knee prostheses - Part 5: Durability performance of the patellofemoral joint |
| 12/23/2024 |
Anesthesiology |
1-192 |
Complete |
ISO |
23371 First edition 2022-05 |
Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices |
| 12/23/2024 |
Dental/
ENT |
4-328 |
Complete |
ANSI ADA |
Standard No. 57-2021 |
Endodontic Sealing Materials |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-499 |
Complete |
ISO |
10555-1 Third edition 2023-11 |
Intravascular catheters - Sterile and single-use intravascular catheters - Part 1: General requirements |
| 01/14/2019 |
Nanotechnology |
18-11 |
Complete |
ISO |
TR 13121 First edition 2011-05-15 |
Nanotechnologies - Nanomaterial risk evaluation |
| 12/23/2024 |
Dental/
ENT |
4-329 |
Complete |
ISO |
6872 Fifth edition 2024-08 |
Dentistry - Ceramic materials |
| 05/29/2024 |
Dental/
ENT |
4-326 |
Complete |
ISO |
9687 Second edition 2015-02 |
Dentistry - Graphical symbols for dental equipment [Including AMENDMENT 1 (2018)] |
| 05/29/2024 |
Anesthesiology |
1-174 |
Complete |
ISO |
18562-2 Second edition 2024-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |
| 05/29/2024 |
Dental/
ENT |
4-327 |
Complete |
ISO |
21531 First edition 2009-02 |
Dentistry - Graphical symbols for dental instruments |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-447 |
Complete |
ISO |
8536-4 Sixth edition 2019-09 |
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
| 12/23/2019 |
Materials |
8-519 |
Complete |
ISO |
13782 Second edition 2019-04 |
Implants for surgery - Metallic materials - Unalloyed tantalum for surgical implant applications |
| 12/23/2019 |
Materials |
8-520 |
Complete |
ASTM |
F799-19 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| 12/21/2020 |
Sterility |
14-554 |
Complete |
ASTM |
F17-20 |
Standard Terminology Relating to Flexible Barrier Packaging |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
