|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-510 |
Complete |
IEC |
80601-2-77 Edition 1.1 2023-11 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-77: Particular requirements for the BASIC SAFETY and essential performance of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-511 |
Complete |
ISO |
11040-4 Fourth edition 2024-06 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-512 |
Complete |
IEC |
60601-2-35 Edition 2.1 2023-12 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-513 |
Partial |
ISO |
14607 Fourth edition 2024-12 |
Non-active surgical implants - Mammary implants - Specific requirements |
| 05/26/2025 |
InVitro Diagnostics |
7-328 |
Partial |
CLSI |
M100 35th Edition |
Performance Standards for Antimicrobial Susceptibility Testing |
| 05/26/2025 |
InVitro Diagnostics |
7-329 |
Complete |
CLSI |
EP06-EG 2nd Edition |
Developer Validation of Linearity, Establishment Guide |
| 05/26/2025 |
InVitro Diagnostics |
7-330 |
Partial |
CLSI |
M38M51S 3rd Edition |
Performance Standards for Antifungal Susceptibility Testing of Filamentous Fungi |
| 05/26/2025 |
InVitro Diagnostics |
7-331 |
Complete |
CLSI |
AUTO02-A2 |
Laboratory Automation: Bar Codes for Specimen Container Identification - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-332 |
Complete |
CLSI |
AUTO01-A |
Laboratory Automation: Specimen Container/Specimen Carrier; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-333 |
Complete |
CLSI |
AUTO04-A |
Laboratory Automation: Systems Operational Requirements, Characteristics, and Information Elements; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-334 |
Complete |
CLSI |
AUTO05-A |
Laboratory Automation: Electromechanical Interfaces; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-335 |
Complete |
CLSI |
POCT01-A2 |
Point-of-Care Connectivity - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-336 |
Complete |
CLSI |
LIS02-A2 |
Standard Specification for Transferring Information Between Clinical Instruments and Computer Systems; Approved Standard-Second Edition. |
| 05/26/2025 |
InVitro Diagnostics |
7-337 |
Complete |
CLSI |
AUTO08-A |
Managing and Validating Laboratory Information Systems; Approved Guideline |
| 05/26/2025 |
InVitro Diagnostics |
7-338 |
Complete |
CLSI |
AUTO10-A |
Autoverification of Clinical Laboratory Test Results; Approved Guideline |
| 05/26/2025 |
InVitro Diagnostics |
7-339 |
Complete |
CLSI |
AUTO09-A |
Remote Access to Clinical Laboratory Diagnostic Devices via the Internet; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-340 |
Complete |
CLSI |
LIS01-A2 |
Standard Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems - Second Edition. |
| 05/26/2025 |
InVitro Diagnostics |
7-341 |
Complete |
CLSI |
AUTO03-A2 |
Laboratory Automation: Communications with Automated Clinical Laboratory Systems, Instruments, Devices, and Information Systems; Approved Standard - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-342 |
Complete |
CLSI |
AUTO12-A |
Specimen Labels: Content and Location, Fonts, and Label Orientation; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-343 |
Complete |
CLSI |
AUTO07-A |
Laboratory Automation: Data Content for Specimen Identification; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-344 |
Complete |
CLSI |
AUTO11-A2 |
Information Technology Security of In Vitro Diagnostic Instruments and Software Systems; Approved Standard - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-345 |
Complete |
CLSI |
AUTO13-A2 (Formerly GP19-A2) |
Laboratory Instruments and Data Management Systems: Design of Software User Interfaces and End-User Software Systems Validation, Operation, and Monitoring; Approved Guideline - Second Edition |
| 05/26/2025 |
Neurology |
17-20 |
Complete |
IEC |
60601-2-40 Third edition 2024-12 |
Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment |
| 05/26/2025 |
Neurology |
17-21 |
Partial |
ASTM |
F647-22 |
Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application |
| 05/26/2025 |
Neurology |
17-22 |
Complete |
IEC |
60601-2-10 Edition 2.2 2023-01 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
| 05/26/2025 |
ObGyn/
Gastroenterology/
Urology |
9-151 |
Complete |
ASTM |
F1828-22 |
Standard Specification for Ureteral Stents |
| 05/26/2025 |
Ophthalmic |
10-96 |
Partial |
ANSI |
Z80.10-2014 |
American National Standard for Ophthalmics - Ophthalmic Instruments - Tonometers |
| 05/26/2025 |
Ophthalmic |
10-137 |
Complete |
ISO |
11979-2 Third edition 2024-10 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods |
| 05/26/2025 |
Ophthalmic |
10-138 |
Partial |
ISO |
16971-1 First edition 2024-11 |
Ophthalmic instruments - Optical coherence tomographs - Part 1: Optical coherence tomographs for the posterior segment of the human eye |
| 05/26/2025 |
Orthopedic |
11-420 |
Complete |
ASTM |
F2580-24 |
Standard Test Method for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prostheses |
| 05/26/2025 |
Orthopedic |
11-421 |
Complete |
ASTM |
F2077-24 |
Standard Test Methods for Intervertebral Body Fusion Devices |
| 05/26/2025 |
Orthopedic |
11-422 |
Complete |
ASTM |
F1798-24 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| 05/26/2025 |
Radiology |
12-367 |
Complete |
ISO |
13695 Second edition 2024-11 |
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers |
| 05/26/2025 |
Radiology |
12-368 |
Complete |
ISO |
13696 Second edition 2022-06 |
Optics and photonics - Test methods for radiation scattered by optical components |
| 05/26/2025 |
Radiology |
12-369 |
Complete |
ISO |
11146-1 Second edition 2021-07 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| 05/26/2025 |
Radiology |
12-370 |
Complete |
ISO |
11146-2 Second edition 2021-07 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams |
| 05/26/2025 |
Radiology |
12-371 |
Complete |
ISO |
14880-2 Second edition 2024-11 |
Optics and photonics -- Microlens arrays -- Part 2: Test methods for wavefront aberrations |
| 05/26/2025 |
Radiology |
12-372 |
Complete |
ISO |
14880-3 Second edition 2024-11 |
Optics and photonics -- Microlens arrays -- Part 3: Test methods for optical properties other than wavefront aberrations |
| 05/26/2025 |
Radiology |
12-373 |
Complete |
ISO |
14880-4 Second edition 2024-11 |
Optics and photonics -- Microlens arrays -- Part 4: Test methods for geometrical properties |
| 05/26/2025 |
Radiology |
12-374 |
Complete |
ISO |
24013 Second edition 2023-06 |
Optics and photonics -- Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation |
| 05/26/2025 |
Radiology |
12-375 |
Complete |
ANSI UL |
122-2019 |
Standard for Safety Photographic Equipment - Ed. 5.0 [Including revisions through October 15, 2019] |
| 05/26/2025 |
Radiology |
12-376 |
Complete |
IEC |
61689 Edition 4.0 2022-03 |
Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0.5 MHz to 5 MHz |
| 05/26/2025 |
Radiology |
12-377 |
Complete |
IEC |
62127-03 Edition 2.0 2022-12 |
Ultrasonics -- Hydrophones -- Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz |
| 05/26/2025 |
Radiology |
12-378 |
Complete |
ISO |
12609-1 Second edition 2021-10 |
Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications -- Part 1: Specification for products |
| 05/26/2025 |
Radiology |
12-379 |
Complete |
IEC |
62127-2 Edition 2.0 2025-01 |
Ultrasonics -- Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz |
| 05/26/2025 |
Radiology |
12-380 |
Complete |
IEC |
60601-2-37 Edition 3.0 2024-07 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
| 05/26/2025 |
Radiology |
12-381 |
Complete |
IEC |
60601-2-68 Edition 2.0 2025-02 |
Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment |
| 05/26/2025 |
Radiology |
12-382 |
Complete |
NEMA |
NU 2-2024 |
Performance Measurements of Positron Emission Tomographs |
| 05/26/2025 |
Radiology |
12-383 |
Complete |
NEMA |
NU 1-2023 |
Performance Measurements of Gamma Cameras |
| 05/26/2025 |
Software/
Informatics |
13-142 |
Complete |
FIRST |
CVSS v3.1 |
Common Vulnerability Scoring System version 3.1 |
| 05/26/2025 |
Software/
Informatics |
13-143 |
Complete |
AAMI |
TIR45:2023 |
Guidance on the use of AGILE practices in the development of medical device software |
| 05/26/2025 |
Software/
Informatics |
13-144 |
Complete |
ISO IEEE |
11073-10425 Edition 3, 2024-09 |
Health informatics - Device interoperability Part 10425: Personal health device communication - Device specialization - Continuous Glucose Monitor (CGM) |
| IEEE |
Std 11073-10425-2023 |
Health informatics - Device Interoperability Part 10425: Personal Health Device Communication - Device Specialization - Continuous Glucose Monitor (CGM) |
| 05/26/2025 |
Software/
Informatics |
13-145 |
Complete |
IEEE |
Std 11073-10419:2023 |
Health informatics - Device Interoperability Part 10419: Personal health device communication - Device Specialization - Insulin Pump |
| 05/26/2025 |
Software/
Informatics |
13-146 |
Complete |
IEEE |
Std 11073-10103 Second edition 2023 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 05/26/2025 |
Software/
Informatics |
13-147 |
Complete |
IEEE |
Std 11073-10406-2023 |
Health informatics - Device Interoperability Part 10406: Personal health device communication - Device Specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) |
| 05/26/2025 |
Software/
Informatics |
13-148 |
Complete |
IEEE |
Std 11073-10417-2023 |
Health informatics - Device Interoperability Part 10417: Personal health device communication - Device Specialization - Glucose Meter |
| 05/26/2025 |
Sterility |
14-610 |
Complete |
ISO |
11138-7 First edition 2019-03 |
Sterilization of health care products - Biological indicators - Part 7: Guidance for the selection, use and interpretation of results |
| 05/26/2025 |
Sterility |
14-611 |
Complete |
ISO |
11137-1 Second edition 2025-04 |
Sterilization of health care products - Radiation - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 12/23/2024 |
Anesthesiology |
1-182 |
Complete |
ISO |
5362 Fifth edition 2024-07 |
Anaesthetic and respiratory equipment - Anaesthetic reservoir bags |
| 12/23/2024 |
Anesthesiology |
1-183 |
Complete |
ASTM |
G175-24 |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 12/23/2024 |
Anesthesiology |
1-184 |
Complete |
ISO |
80601-2-55 Second edition 2018-02 [Including AMD1:2023] |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitor [Including Amendment 1 (2023)]. |
| 12/23/2024 |
Anesthesiology |
1-185 |
Complete |
ISO |
80601-2-79 Second edition 2024-08 |
Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment |
| 12/23/2024 |
Anesthesiology |
1-186 |
Complete |
ISO |
80601-2-80 Second edition 2024-08 |
Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency |
| 12/23/2024 |
Anesthesiology |
1-187 |
Complete |
ISO |
80601-2-12 Third edition 2023-11 |
Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| 12/23/2024 |
Anesthesiology |
1-188 |
Complete |
ISO |
80601-2-84 Second edition 2023-11 |
Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment |
| 12/23/2024 |
Anesthesiology |
1-189 |
Complete |
ISO |
4135 Fourth edition 2022-01 |
Anaesthetic and respiratory equipment - Vocabulary |
| 12/23/2024 |
Anesthesiology |
1-190 |
Complete |
ISO |
9360-1 First edition 2000-03 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| 12/23/2024 |
Anesthesiology |
1-191 |
Complete |
ISO |
9360-2 First edition 2001-07 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| 12/23/2024 |
Anesthesiology |
1-192 |
Complete |
ISO |
23371 First edition 2022-05 |
Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices |
| 12/23/2024 |
Biocompatibility |
2-304 |
Partial |
ASTM |
F2382-24 |
Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT) |
| 12/23/2024 |
Cardiovascular |
3-193 |
Complete |
ISO |
12417-1 Second edition 2024-02 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements |
| 12/23/2024 |
Cardiovascular |
3-194 |
Complete |
ISO |
7199 Fourth edition 2024-09 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| 12/23/2024 |
Cardiovascular |
3-195 |
Partial |
ISO |
5910 Second edition 2024-07 |
Cardiovascular implants and extracorporeal systems - Cardiac valve repair devices |
| 12/23/2024 |
Cardiovascular |
3-196 |
Partial |
ISO |
81060-2 Third edition 2018-11 [Including AMD1:2020 and AMD2:2024] |
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type [Including: AMENDMENT 1 (2020) and AMENDMENT 2 (2024)] |
| 12/23/2024 |
Cardiovascular |
3-197 |
Complete |
ISO |
25539-4 First edition 2021-11 |
Cardiovascular implants - Endovascular devices - Part 4: Application of ISO 17327-1 for coated endovascular devices |
| 12/23/2024 |
Dental/
ENT |
4-328 |
Complete |
ANSI ADA |
Standard No. 57-2021 |
Endodontic Sealing Materials |
| 12/23/2024 |
Dental/
ENT |
4-329 |
Complete |
ISO |
6872 Fifth edition 2024-08 |
Dentistry - Ceramic materials |
| ANSI ADA |
Standard No. 69-2025 |
Dentistry - Ceramic Materials |
| 12/23/2024 |
Dental/
ENT |
4-330 |
Complete |
ANSI ADA |
Standard No. 63-2020 |
Endodontic Instruments - Auxillary |
| 12/23/2024 |
Dental/
ENT |
4-331 |
Complete |
ISO |
28399 Third edition 2021-03 |
Dentistry - External tooth bleaching products |
| ANSI ADA |
Standard No. 136-2022 |
Dentistry - External Tooth Bleaching Products |
| 12/23/2024 |
Dental/
ENT |
4-332 |
Complete |
ANSI ADA |
Standard No. 206-2024 |
Implantable Materials for Bone Filling and Augmentation in Oral and Maxillofacial Surgery - Contents of a Technical File |
| 12/23/2024 |
Dental/
ENT |
4-333 |
Complete |
ISO |
3630-4 Second edition 2023-08 |
Dentistry - Endodontic instruments - Part 4: Auxiliary instruments |
| ANSI ADA |
Standard No. 101-4-2025 |
Dentistry - Endodontic Instruments - Part 4: Auxiliary Instruments |
| 12/23/2024 |
Dental/
ENT |
4-334 |
Complete |
ISO |
11143 Second edition 2008-07 |
Dentistry - Amalgam separators |
| ANSI ADA |
Standard No. 108-2009, Addendum (R2022) |
Amalgam Separators |
| 12/23/2024 |
Dental/
ENT |
4-335 |
Complete |
ISO |
11499 Third edition 2014-06 |
Dentistry - Single-use cartridges for local anaesthetics |
| ANSI ADA |
Standard No. 190-2020 |
Single-Use Dental Cartridges for Local Anesthetics |
| 12/23/2024 |
Dental/
ENT |
4-336 |
Complete |
ISO |
18397 First edition 2016-01 |
Dentistry - Powered scaler |
| ANSI ADA |
Standard No. 157-2020 |
Powered Dental Scaler Handpieces and Tips |
| 12/23/2024 |
Dental/
ENT |
4-337 |
Complete |
ISO |
20608 First edition 2018-04 |
Dentistry - Powder jet handpieces and powders |
| ANSI ADA |
Standard No. 212-2024 |
Dentistry - Powder Jet Handpieces and Powders |
| 12/23/2024 |
Dental/
ENT |
4-338 |
Complete |
ISO |
22683 First edition 2022-05 |
Dentistry - Rotational adaptability test between implant body and implant abutment in dental implant systems |
| 12/23/2024 |
General I (QS/
RM) |
5-143 |
Complete |
ISO |
14630 Fffth edition 2024-09 |
Non-active surgical implants -- General requirements |
| 12/23/2024 |
General II (ES/
EMC) |
19-51 |
Complete |
UL |
1642 Sixth Edition September 29, 2020 |
Standard For Safety Lithium Batteries |
| 12/23/2024 |
General II (ES/
EMC) |
19-52 |
Complete |
UL |
2054 Third Edition November 17, 2021 |
Standard For Safety Household and Commercial Batteries |
| 12/23/2024 |
General II (ES/
EMC) |
19-53 |
Complete |
IEC |
TS 60601-4-6 Edition 1.0 2024-04 |
Medical electrical equipment - Part 4-6: Guidance and interpretation - Voluntary guidance to help achieve basic safety and essential performance with regard to the possible effects of electromagnetic disturbances |
| 12/23/2024 |
General Plastic Surgery/
General Hospital |
6-503 |
Complete |
ISO |
16571 Second edition 2024-03 |
Systems for evacuation of plume generated by medical device |
| 12/23/2024 |
General Plastic Surgery/
General Hospital |
6-504 |
Complete |
ASTM |
F1862/F1862M-24 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 12/23/2024 |
InVitro Diagnostics |
7-322 |
Complete |
CLSI |
M47 2nd Edition |
Principles and Procedures for Blood Cultures |
| 12/23/2024 |
InVitro Diagnostics |
7-323 |
Complete |
CLSI |
EP19 3rd Edition |
A Framework for Using CLSI Documents to Evaluate Clinical Laboratory Measurement Procedures |
| 12/23/2024 |
InVitro Diagnostics |
7-324 |
Complete |
CLSI |
M07 12th Edition |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically |
| 12/23/2024 |
InVitro Diagnostics |
7-325 |
Partial |
CLSI |
M02 14th Edition |
Performance Standards for Antimicrobial Disk Susceptibility Tests |
| 12/23/2024 |
InVitro Diagnostics |
7-326 |
Partial |
CLSI |
M24S 2nd Edition |
Performance Standards for Susceptibility Testing of Mycobacteria, Nocardia spp., and Other Aerobic Actinomycetes |
| 12/23/2024 |
InVitro Diagnostics |
7-327 |
Partial |
CLSI |
M100 34th Edition |
Performance Standards for Antimicrobial Susceptibility Testing |
| 12/23/2024 |
Materials |
8-618 |
Complete |
ASTM |
F1350-24 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| 12/23/2024 |
Materials |
8-619 |
Complete |
ISO |
5832-4 Fourth edition 2024-04 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
