|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 12/22/2025 |
Dental/
ENT |
4-351 |
Complete |
ISO |
6877 Fourth edition 2025-08 |
Dentistry - Endodontic obturating materials |
| 12/18/2023 |
Dental/
ENT |
4-309 |
Complete |
ISO |
6877 Third edition 2021-09 |
Dentistry - Endodontic obturating materials |
| ANSI ADA |
Standard No. 78-2022 |
Dentistry - Endodontic Obturating Materials |
| 12/23/2024 |
Materials |
8-624 |
Complete |
ASTM |
F2129-24 |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-148 |
Complete |
ISO CIE |
11664-6 Second edition 2022-08 |
Colorimetry - Part 6: CIEDE2000 colour-difference formula |
| 12/22/2025 |
Dental/
ENT |
4-348 |
Complete |
ISO |
9917-1 Third Edition 2025-05 |
Dentistry - Water-based cements - Part 1: Acid-base cements |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-438 |
Complete |
IEC |
80601-2-77 Edition 1.0 2019-07 |
Medical electrical equipment - Part 2-77: Particular requirements for the BASIC SAFETY and essential performance of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT |
| ANSI AAMI IEC |
80601-2-77:2020 |
Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment |
| 12/23/2024 |
Materials |
8-626 |
Complete |
ASTM |
E2948-24 |
Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-149 |
Complete |
IEC |
60601-2-39 Edition 3.0 2018-04 |
Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
|
| 05/29/2023 |
Radiology |
12-351 |
Complete |
IEC |
60601-2-43 Edition 3.0 2022-12 |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
| 09/17/2018 |
Orthopedic |
11-185 |
Complete |
ASTM |
F2267-04 (Reapproved 2018) |
Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression |
| 12/22/2025 |
Orthopedic |
11-424 |
Complete |
ASTM |
F983-24 |
Standard Practice for Permanent Marking of Orthopaedic Implant Components |
| 09/17/2018 |
Orthopedic |
11-197 |
Complete |
ASTM |
F983-86 (Reapproved 2018) |
Standard Practice for Permanent Marking of Orthopaedic Implant Components |
| 12/22/2025 |
Orthopedic |
11-425 |
Complete |
ASTM |
F565-21 |
Standard Practice for Care and Handling of Orthopedic Implants and Instruments |
| 12/23/2024 |
Cardiovascular |
3-193 |
Complete |
ISO |
12417-1 Second edition 2024-02 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements |
| 06/27/2016 |
Cardiovascular |
3-143 |
Complete |
ISO |
12417-1 First edition 2015-10-01 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements |
| 12/23/2024 |
Sterility |
14-609 |
Complete |
AAMI |
TIR17:2024 |
Compatibility of materials subjected to sterilization |
| 05/25/2026 |
Dental/
ENT |
4-396 |
Complete |
ISO |
22570 First edition 2020-02 |
Dentistry - Spoons and bone curettes |
| 12/22/2025 |
Dental/
ENT |
4-349 |
Complete |
ANSI ADA |
Standard No. 34-2025 |
Dental Cartridge Syringes |
| 05/26/2025 |
Dental/
ENT |
4-339 |
Complete |
ANSI ADA |
Standard No. 119-2023 |
Dentistry-Manual Toothbrushes |
| 05/30/2022 |
Dental/
ENT |
4-293 |
Complete |
ANSI ADA |
Standard No. 119-2021 |
Manual Toothbrushes |
| 05/26/2025 |
Dental/
ENT |
4-340 |
Complete |
ANSI ADA |
Standard No. 46-2016 |
Dental Patient Chair |
| 05/26/2025 |
Dental/
ENT |
4-341 |
Complete |
ANSI ADA |
Standard No. 47-1-2021 |
Stationary Dental Units and Patient Chairs-Part 1: General Requirements |
| 05/26/2025 |
Dental/
ENT |
4-342 |
Complete |
ANSI ADA |
Standard No. 47-2-2021 |
Stationary Dental Units and Patient Chairs-Part 2: Air, Water, Suction and Wastewater Systems |
| 10/09/2023 |
Software/
Informatics |
13-129 |
Complete |
ISO IEC IEEE |
29119-1 Second edition 2022-01 |
Software and systems engineering - Software testing - Part 1: General concepts |
| 05/29/2023 |
Physical Medicine |
16-235 |
Complete |
ISO |
7176-25 Second Edition 2022 |
Wheelchairs - Part 25: Lead-acid batteries and chargers for powered wheelchairs - Requirements and test methods |
| 05/29/2023 |
Physical Medicine |
16-236 |
Complete |
ISO |
7176-19 Third Edition 2022 |
Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles |
| 12/18/2023 |
Dental/
ENT |
4-320 |
Complete |
ISO |
13402 First edition 1995-08-01 |
Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure |
| 01/27/2015 |
Sterility |
14-242 |
Complete |
ISO |
14644-3 First edition 2005-12-15 |
Cleanrooms and associated controlled environments - Part 3: Test methods |
| 07/26/2016 |
Biocompatibility |
2-222 |
Complete |
ISO |
10993-2 Second edition 2006-07-15 |
Biological Evaluation of medical devices - Part 2: Animal welfare requirements |
| ANSI AAMI ISO |
10993-2:2006/(R)2014 |
Biological Evaluation of medical devices - Part 2: Animal welfare requirements |
| 10/09/2023 |
Software/
Informatics |
13-130 |
Complete |
ANSI AAMI |
2700-2-1:2022 |
Medical devices and medical systems - Essential safety and performance requirements for equipment comprising the patient-centric integrated clinical environment (ICE): Part 2-1: Particular requirements for forensic data logging |
| 06/07/2018 |
Anesthesiology |
1-135 |
Complete |
ISO |
18562-2 First edition 2017-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |
| 05/29/2023 |
Materials |
8-600 |
Complete |
ASTM |
F1978-22 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 09/17/2018 |
Materials |
8-467 |
Complete |
ASTM |
F1978-18 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 05/29/2023 |
Materials |
8-601 |
Complete |
ASTM |
F2516-22 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| 07/15/2019 |
Materials |
8-506 |
Complete |
ASTM |
F2516-18 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| 05/29/2023 |
Materials |
8-603 |
Complete |
ASTM |
F1472-23 |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| 05/30/2022 |
Materials |
8-586 |
Complete |
ASTM |
F2989-21 |
Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| 12/20/2021 |
Materials |
8-570 |
Complete |
ASTM |
F1108-21 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| 12/20/2021 |
Materials |
8-571 |
Complete |
ASTM |
F2052-21 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
| 12/19/2022 |
Anesthesiology |
1-155 |
Complete |
ISO |
10079-2 Fourth edition 2022-03 |
Medical suction equipment - Part 2: Manually powered suction equipment |
| 01/14/2019 |
InVitro Diagnostics |
7-285 |
Complete |
CLSI |
M48-A 2nd Edition |
Laboratory Detection and Identification of Mycobacteria |
| 01/27/2015 |
Sterility |
14-389 |
Complete |
ISO |
14644-9 First edition 2012-08-15 |
Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration |
| 08/06/2013 |
Software/
Informatics |
13-52 |
Complete |
ISO IEEE |
11073-10408 First edition 2010-05-01 |
Health informatics - Point-of-care medical device communication - Part 10408: Device specialization - Thermometer |
| 05/29/2024 |
Software/
Informatics |
13-133 |
Complete |
ISO IEEE |
11073-10415 Second edition 2022-12 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| IEEE |
Std 11073-10415-2019 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| 12/18/2023 |
Anesthesiology |
1-165 |
Complete |
ISO |
80601-2-13 Second edition 2022-04 |
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| 05/29/2023 |
Sterility |
14-587 |
Complete |
AAMI |
TIR104:2022 |
Guidance on transferring health care products between radiation sterilization sources |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-486 |
Complete |
ISO |
10535 Third edition 2021-10 |
Assistive products - Hoists for the transfer of disabled persons - Requirements and test methods |
| 12/18/2023 |
Sterility |
14-589 |
Complete |
ISO |
14644-4 Second edition 2022-11 |
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up |
| 07/15/2019 |
Sterility |
14-528 |
Complete |
ISO |
11137-1 First edition 2006-04-15 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2018)] |
| ANSI AAMI ISO |
11137-1:2006/(R)2015 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation, and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2019)] |
| 12/18/2023 |
Anesthesiology |
1-164 |
Complete |
ISO |
5361 Fourth edition 2023-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| 12/23/2016 |
Anesthesiology |
1-118 |
Complete |
ISO |
5361 Third edition 2016-09-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-490 |
Complete |
ISO |
10555-6 First edition 2015-04-15 [Including AMD1:2019] |
Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports [Including AMENDMENT 1 (2019)] |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-495 |
Complete |
ISO |
20698 First Edition 2018-07 |
Catheter systems for neuraxial application - Sterile and single-use catheters and accessories |
| 05/29/2023 |
Cardiovascular |
3-186 |
Complete |
ISO |
14708-2 Third edition 2019-09 |
Implants for surgery - Active implantable medical devices - Part 2: Cardiac pacemakers |
| 05/29/2023 |
Cardiovascular |
3-187 |
Complete |
ISO |
14708-6 Second edition 2019-09 |
Implants for surgery - Active implantable medical devices - Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) |
| 12/18/2023 |
Materials |
8-605 |
Complete |
ASTM |
F1609-23 |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 01/27/2015 |
Materials |
8-171 |
Complete |
ASTM |
F1609-08 (Reapproved 2014) |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 09/17/2018 |
Orthopedic |
11-326 |
Complete |
ASTM |
F384-17 |
Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
| 12/22/2025 |
Orthopedic |
11-432 |
Complete |
ASTM |
F2180-24 |
Standard Specification for Metallic Implantable Strands and Cables |
| 12/22/2025 |
Dental/
ENT |
4-356 |
Complete |
ANSI ADA |
Standard No. 32-2024 |
Dentistry - Orthodontic Wires |
| 12/22/2025 |
Dental/
ENT |
4-357 |
Complete |
ANSI ADA |
Standard No. 54-1986 (R2024) |
Double-Pointed, Parenteral, Single Use Needles for Dentistry |
| 12/22/2025 |
Dental/
ENT |
4-358 |
Complete |
ANSI ADA |
Standard No. 95-2020 |
Endodontics Instruments - Enlargers |
| 12/18/2023 |
Materials |
8-606 |
Complete |
ASTM |
F2537-23 |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 01/27/2015 |
Sterility |
14-390 |
Complete |
ISO |
14644-10 First edition 2013-03-01 |
Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-515 |
Complete |
ASTM |
D6499-24 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-411 |
Complete |
ASTM |
D6499-18 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 01/14/2019 |
Dental/
ENT |
4-217 |
Complete |
ANSI ASA |
S3.36-2012 (Reaffirmed 2022) |
American National Standard Specification for a Manikin for Simulated in-situ Airborne Acoustic Measurements |
| 05/29/2023 |
Biocompatibility |
2-299 |
Complete |
ASTM |
F1904-23 |
Standard Guide for Testing the Biological Responses to Medical Device Particulate Debris and Degradation Products in vivo |
| 12/22/2025 |
Biocompatibility |
2-308 |
Complete |
ASTM |
F1984-25 |
Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials |
| 07/26/2016 |
Biocompatibility |
2-213 |
Complete |
ASTM |
F1904-14 |
Standard Practice for Testing the Biological Responses to Particles In Vivo |
| 05/29/2024 |
Sterility |
14-598 |
Complete |
ISO |
14644-3 Second edition 2020-06 |
Cleanrooms and associated controlled environments - Part 3: Test methods |
| 05/29/2023 |
Orthopedic |
11-399 |
Complete |
ASTM |
F1357-23 |
Standard Specification for Articulating Total Wrist Implants |
| 12/18/2023 |
Orthopedic |
11-403 |
Complete |
ASTM |
F3047M-23 |
Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-Hard Articulations |
| 09/11/2023 |
Orthopedic |
11-401 |
Complete |
ISO |
21535 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants |
| 05/29/2024 |
Materials |
8-616 |
Complete |
ISO ASTM |
52926-2 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 2: Qualification of operators for PBF-LB |
| 05/29/2024 |
Materials |
8-617 |
Complete |
ISO ASTM |
52926-3 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 3: Qualification of operators for PBF-EB |
| 05/29/2024 |
General I (QS/
RM) |
5-142 |
Complete |
ISO |
780 Fifth edition 2015-12-01 |
Packaging - Distribution packaging - Graphical symbols for handling and storage of packages |
| 09/09/2008 |
Sterility |
14-142 |
Complete |
ISO |
14698-1:2003 |
Cleanrooms and Associated Controlled Environments - Biocontamination Control - Part 1: General Principles and Methods |
| 03/18/2009 |
InVitro Diagnostics |
7-170 |
Complete |
CLSI |
I/LA21-A2 |
Clinical Evaluation of Immunoassays; Approved Guideline - Second Edition |
| 03/18/2009 |
InVitro Diagnostics |
7-176 |
Complete |
CLSI |
I/LA30-A (Replaces I/LA30-P) |
Immunoassay Interference by Endogenous Antibodies; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-180 |
Complete |
CLSI |
M34-A (Replaces M24-P) |
Western Blot Assay for Antibodies to Borrelia burgdorferi; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-182 |
Complete |
CLSI |
M36-A |
Clinical Use and Interpretation of Serologic Tests for Toxoplasma gondii; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-185 |
Complete |
CLSI |
M41-A |
Viral Culture; Approved Guideline. |
| 03/18/2009 |
General Plastic Surgery/
General Hospital |
6-215 |
Complete |
ASTM |
F2132-01 (Reapproved 2008)e1 |
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps |
| 03/18/2009 |
InVitro Diagnostics |
7-190 |
Complete |
CLSI |
M50-A (Replaces M50-P) |
Quality Control for Commercial Microbial Identification Systems; Approved Guideline |
| 06/07/2018 |
Software/
Informatics |
13-104 |
Complete |
UL ANSI |
2900-2-1 First Edition 2017 |
Standard for Safety, Software Cybersecurity for Network-Connectable Products, Part 2-1: Particular Requirements for Network Connectable Components of Healthcare and Wellness Systems |
| 12/22/2025 |
InVitro Diagnostics |
7-349 |
Complete |
CLSI |
EP35 2nd Edition |
Assessment of Equivalence or Suitability of Specimen Types for Medical Laboratory Measurement Procedures |
| 01/27/2015 |
ObGyn/
Gastroenterology/
Urology |
9-45 |
Complete |
ASTM |
F2528-06(2023) |
Standard Test Methods for Enteral Feeding Devices with a Retention Balloon |
| 07/09/2014 |
Sterility |
14-286 |
Complete |
ANSI AAMI |
ST65:2008/(R)2018 |
Processing of reusable surgical textiles for use in health care facilities |
| 03/16/2012 |
Tissue Engineering |
15-31 |
Complete |
ASTM |
F2312-11 (Reapproved 2020) |
Standard Terminology Relating to Tissue Engineered Medical Products |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-177 |
Complete |
ASTM |
E1112-00 (Reapproved 2018) |
Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature |
| 03/16/2012 |
InVitro Diagnostics |
7-165 |
Complete |
CLSI |
H20-A2 (Replaces H20-A) |
Reference Leukocyte (WBC) Differential Count (Proportional) and Evaluation of Instrumental Methods; Approved Standard - Second Edition |
| 09/17/2018 |
Materials |
8-412 |
Complete |
ASTM |
F2537-06 (Reapproved 2017) |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 12/18/2023 |
Materials |
8-607 |
Complete |
ASTM |
F2082/F2082M-23 |
Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/23/2016 |
Materials |
8-437 |
Complete |
ASTM |
F2082/F2082M-16 |
Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 08/06/2013 |
Dental/
ENT |
4-90 |
Complete |
ANSI ASA |
S3.39:1987 (Reaffirmed 2025) |
American National Standard Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance) |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-117 |
Complete |
ASTM |
F2172-02 (Reapproved 2011) |
Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-303 |
Complete |
ISO |
10555-5 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 5: Over-needle peripheral catheters |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-305 |
Complete |
ISO |
10555-3 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 3: Central venous catheters |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
