|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-486 |
Complete |
ISO |
10535 Third edition 2021-10 |
Assistive products - Hoists for the transfer of disabled persons - Requirements and test methods |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-494 |
Complete |
ASTM |
F3352/F3352M-23a |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-515 |
Complete |
ASTM |
D6499-24 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-411 |
Complete |
ASTM |
D6499-18 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-512 |
Complete |
IEC |
60601-2-35 Edition 2.1 2023-12 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-423 |
Complete |
IEC |
60601-2-6 Edition 2.1 2016-04 |
CONSOLIDATED VERSION Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
| 06/27/2016 |
General Plastic Surgery/
General Hospital |
6-363 |
Complete |
ISO |
11810 Second edition 2015-12-15 |
Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Primary ignition, penetration, flame spread and secondary ignition |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-123 |
Complete |
ASTM |
E667-98 (Reapproved 2017) |
Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-475 |
Complete |
ISO |
11608-4:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-480 |
Complete |
ISO |
11608-6:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 6: On-body delivery |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-481 |
Complete |
ANSI AAMI |
CN27:2021 |
General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-482 |
Complete |
AAMI |
TIR101:2021 |
Fluid delivery performance testing for infusion pumps |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-519 |
Complete |
ASTM |
F2101-25 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-469 |
Complete |
USP-NF |
M99650_02_01 |
<861> Sutures - Diameter |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-477 |
Complete |
ISO |
11608-3:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-465 |
Complete |
USP-NF |
M76090_03_01 |
Sodium Chloride Irrigation |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-466 |
Complete |
USP-NF |
M76070_03_01 |
Sodium Chloride Injection |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-467 |
Complete |
USP-NF |
M80200_04_01 |
Nonabsorbable Surgical Suture |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-468 |
Complete |
USP-NF |
M99670_02_01 |
<881> Tensile Strength |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-493 |
Complete |
ASTM |
F2101-23 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-470 |
Complete |
USP-NF |
M99660_03_01 |
<871> Sutures - Needle Attachment |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-472 |
Complete |
USP-NF |
M36660_04_01 |
Heparin Lock Flush Solution |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-473 |
Complete |
USP-NF |
M80190_04_01 |
Absorbable Surgical Suture |
| 12/21/2020 |
General Plastic Surgery/
General Hospital |
6-450 |
Complete |
IEC |
60601-2-50 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-147 |
Complete |
ASTM |
D6978-05(2023) |
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-479 |
Complete |
ISO |
11608-5:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-381 |
Complete |
ISO |
6009 Fourth edition 2016-08-01 |
Hypodermic needles for single use - Colour coding for identification. |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-514 |
Complete |
ISO |
1135-4 Seventh edition 2025-05 |
Transfusion equipment for medical use-Part 4: Transfusion sets for single use, gravity feed |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-384 |
Complete |
ISO |
1135-4 Sixth edition 2015-12-01 |
Transfusion equipment for medical use-Part 4: Transfusion sets for single use, gravity feed |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-517 |
Complete |
ASTM |
F3502-25 |
Standard Specification for Barrier Face Coverings |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-379 |
Complete |
ISO |
7864 Fourth edition 2016-08-01 |
Sterile hypodermic needles for single use - Requirements and test methods |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-441 |
Complete |
ISO |
7886-3 Second edition 2020-05 |
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-401 |
Complete |
ASTM |
D7160-16 (Reapproved 2023) |
Standard Practice for Determination of Expiration Dating for Medical Gloves |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2023) |
Standard Terminology for Surgical Suture Needles |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-409 |
Complete |
ASTM |
F703-18 (Reapproved 2022) |
Standard Specification for Implantable Breast Prostheses |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-462 |
Complete |
IEC |
60601-2-20 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-406 |
Complete |
ASTM |
F1862/F1862M-17 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-518 |
Complete |
ASTM |
F1670/F1670M-24a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 12/23/2024 |
General Plastic Surgery/
General Hospital |
6-504 |
Complete |
ASTM |
F1862/F1862M-24 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-461 |
Complete |
IEC |
60601-2-19 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-437 |
Complete |
ISO |
23907-2 First edition 2019-11 |
Sharps injury protection - Requirements and test methods - Part 2: Reusable sharps containers. |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-463 |
Complete |
IEC |
60601-2-21 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers |
| 08/20/2012 |
General Plastic Surgery/
General Hospital |
6-278 |
Complete |
ISO |
11040-5 Third edition 2012-02-15 |
Prefilled syringes - Part 5: Plunger stoppers for injectables |
| 05/25/2026 |
General Plastic Surgery/
General Hospital |
6-521 |
Complete |
IEC |
60601-2-2 Edition 6.1 2023-02 CONSOLIDATED VERSION Corrected Version 2025-11 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-410 |
Complete |
ISO |
8536-6 Third edition 2016-12-01 |
Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-505 |
Complete |
ISO |
21649 Second Edition 2023-01 |
Needle-free injectors for medical use -- Requirements and test methods |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-476 |
Complete |
ISO |
11608-2:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-405 |
Complete |
IEC |
80601-2-59 Edition 2.0 2017-09 |
Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-422 |
Complete |
AAMI |
TIR38:2019 |
Medical device safety assurance case guidance |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-488 |
Complete |
ASTM |
F1671/F1671M-22 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-506 |
Complete |
ISO |
8536-2 Fourth edition 2023-01 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles |
| 08/20/2012 |
General Plastic Surgery/
General Hospital |
6-242 |
Complete |
ISO |
8536-2 Third edition 2010-03-15 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-511 |
Complete |
ISO |
11040-4 Fourth edition 2024-06 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-464 |
Complete |
ISO |
11040-4 Third edition 2015-04-01 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling [Including AMENDMENT 1 (2020)] |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-507 |
Complete |
ISO |
23908 Second Edition 2024-12 |
Sharps injury protection - Sharps protection mechanisms for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration - Requirements and test methods |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-447 |
Complete |
ISO |
8536-4 Sixth edition 2019-09 |
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
| 01/15/2013 |
General Plastic Surgery/
General Hospital |
6-122 |
Complete |
ISO |
8536-5 Second edition 2004-02-01 |
Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-214 |
Complete |
ASTM |
D6355-07(2022) |
Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-353 |
Complete |
ASTM |
F2051-00 (Reapproved 2022) |
Standard Specification for Implantable Saline Filled Breast Prosthesis |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-424 |
Complete |
ASTM |
D5151-19(2023) |
Standard Test Method for Detection of Holes in Medical Gloves |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-426 |
Complete |
ISO |
23907-1 First edition 2019-01 |
Sharps injury protection - Requirements and test methods - Sharps containers |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-216 |
Complete |
ISO |
8536-7 Third edition 2009-01-15 |
Infusion equipment for medical use - Part 7: Caps made of aluminum-plastics combinations for infusion bottles |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-400 |
Complete |
ASTM |
F3212-16(2023) |
Standard Test Method for Coring Testing of Huber Needles |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-268 |
Complete |
ASTM |
F921-10 (Reapproved 2024) |
Standard Terminology Relating to Hemostatic Forceps |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-355 |
Complete |
ASTM |
D3772-15(2021) |
Standard Specification for Industrial Rubber Finger Cots |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-200 |
Complete |
ASTM |
E1061-01(2022) |
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-421 |
Complete |
ISO |
80601-2-56 Second edition 2017-03 [Including AMD1:2018] |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement. [Including: Amendment 1 (2018)]. |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-179 |
Complete |
ISO |
21649 First edition 2006-06-01 |
Needle-free injectors for medical use -- Requirements and test methods |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-478 |
Complete |
ISO |
11608-1:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-272 |
Complete |
ASTM |
F2062-00 (Reapproved 2018) |
Standard Specification for Square Drive Interconnections on Surgical Instruments |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-499 |
Complete |
ISO |
10555-1 Third edition 2023-11 |
Intravascular catheters - Sterile and single-use intravascular catheters - Part 1: General requirements |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-404 |
Complete |
ISO |
7886-1 Second edition 2017-05 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-70 |
Complete |
ASTM |
E825-98 (Reapproved 2023) |
Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-124 |
Complete |
ASTM |
E1104-98 (Reapproved 2023) |
Standard Specification for Clinical Thermometer Probe Covers and Sheaths |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-125 |
Complete |
ASTM |
E1965-98 (Reapproved 2023) |
Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-240 |
Complete |
ISO |
8536-3 Third edition 2009-06-01 |
Infusion equipment for medical use - Part 3: Aluminum caps for infusion bottles |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-276 |
Complete |
ISO |
8536-1 Fourth edition 2011-09-01 |
Infusion equipment for medical use - Part 1: Infusion glass bottles |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-498 |
Complete |
ISO |
10555-4 Third edition 2023-11 |
Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters |
| 03/18/2009 |
General Plastic Surgery/
General Hospital |
6-215 |
Complete |
ASTM |
F2132-01 (Reapproved 2008)e1 |
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-444 |
Complete |
ASTM |
D7103-19(2023) |
Standard Guide for Assessment of Medical Gloves |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-380 |
Complete |
ISO |
9626 Second edition 2016-08-01 |
Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-382 |
Complete |
ISO |
11608-7 First edition 2016-08-01 |
Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-356 |
Complete |
ASTM |
D5712-15(2020) |
Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-439 |
Partial |
ISO |
7886-2 Second edition 2020-04 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-445 |
Partial |
ASTM |
D5250-19(2023) |
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-440 |
Partial |
ASTM |
D3578-19(2023) |
Standard Specification for Rubber Examination Gloves |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-516 |
Partial |
ASTM |
F2407/F2407M-23a |
Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| 12/21/2020 |
General Plastic Surgery/
General Hospital |
6-448 |
Partial |
ASTM |
F2407-20 |
Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-513 |
Partial |
ISO |
14607 Fourth edition 2024-12 |
Non-active surgical implants - Mammary implants - Specific requirements |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-496 |
Partial |
ASTM |
F739-20 |
Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact |
| 12/18/2023 |
General Plastic Surgery/
General Hospital |
6-497 |
Partial |
ASTM |
D7866-23 |
Standard Specification for Radiation Attenuating Protective Gloves |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-117 |
Complete |
ASTM |
F2172-02 (Reapproved 2011) |
Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-303 |
Complete |
ISO |
10555-5 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 5: Over-needle peripheral catheters |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-305 |
Complete |
ISO |
10555-3 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 3: Central venous catheters |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-407 |
Complete |
ASTM |
F3186-17 |
Standard Specification for Adult Portable Bed Rails and Related Products |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-509 |
Complete |
ASTM |
F3186-24 |
Standard Specification for Adult Portable Bed Rails and Related Products |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-502 |
Complete |
ISO |
23217 First Edition 2024-02 |
Injection systems for self-administration by paediatric patients - Requirements and guidelines for design |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-492 |
Complete |
ASTM |
F2100-23 |
Standard Specification for Performance of Materials Used in Medical Face Masks |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-446 |
Partial |
ASTM |
D6319-19(2023) |
Standard Specification for Nitrile Examination Gloves for Medical Application |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-443 |
Partial |
ASTM |
D3577-19 (Reapproved 2023) |
Standard Specification for Rubber Surgical Gloves |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-389 |
Partial |
IEC |
60601-2-2 Edition 6.0 2017-03 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
| ANSI AAMI IEC |
60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
| 06/27/2016 |
General Plastic Surgery/
General Hospital |
6-364 |
Partial |
ISO |
8537 Third edition 2016-03-15 |
Sterile single-use syringes, with or without needle, for insulin |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-178 |
Partial |
ASTM |
D6124-06(2022) |
Standard Test Method for Residual Powder on Medical Gloves |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-487 |
Partial |
ANSI AAMI |
PB70:2022 |
Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities |
| 12/21/2020 |
General Plastic Surgery/
General Hospital |
6-449 |
Partial |
ASTM |
F1169-19 |
Standard Consumer Safety Specification for Full-Size Baby Cribs |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-358 |
Partial |
ISO |
8536-8 Second Edition 2015-06-15 |
Infusion Equipment for Medical Use - Part 8: Infusion Sets for Single Use with Pressure Infusion Apparatus |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-360 |
Partial |
ISO |
8536-10 Second Edition 2015-06-15 |
Infusion Equipment for Medical Use - Part 10: Accessories for Fluid Lines for Single Use with Pressure Infusion Equipment |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-442 |
Partial |
ASTM |
D6977-19(2023) |
Standard Specification for Polychloroprene Examination Gloves for Medical Application |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-359 |
Partial |
ISO |
8536-9 Second Edition 2015-06-15 |
Infusion Equipment for Medical Use - Part 9: Fluid Lines for Single Use with Pressure Infusion Equipment |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-361 |
Partial |
ISO |
8536-11 Second Edition 2015-06-15 |
Infusion Equipment for Medical Use - Part 11: Infusion Filters for Single Use with Pressure Infusion Equipment |
| 04/04/2016 |
InVitro Diagnostics |
7-259 |
Partial |
CLSI |
GP23-A2 (Replaces GP23-A) |
Nongynecological Cytology Specimens: Preexamination, Examination, and Postexamination Processes; Approved Guideline - Second Edition |
| 08/21/2017 |
InVitro Diagnostics |
7-272 |
Partial |
CLSI |
C57 1st Edition (Reaffirmed: January 2020) |
Mass Spectrometry for Androgen and Estrogen Measurements in Serum |
| 07/15/2019 |
InVitro Diagnostics |
7-289 |
Partial |
CLSI |
MM17 2nd Edition |
Verification and Validation of Multiplex Nucleic Acid Assays |
| 07/06/2020 |
InVitro Diagnostics |
7-296 |
Partial |
CLSI |
EP09c 3rd Edition |
Measurement Procedure Comparison and Bias Estimation Using Patient Samples |
| 05/29/2024 |
InVitro Diagnostics |
7-321 |
Partial |
CLSI |
MM24 1st Edition |
Molecular Methods for Genotyping and Strain Typing of Infectious Organisms |
| 12/23/2016 |
InVitro Diagnostics |
7-268 |
Partial |
CLSI |
EP21 2nd Edition (Replaces EP21-A) |
Evaluation of Total Analytical Error for Quantitative Medical Laboratory Measurement Procedures |
| 07/15/2019 |
InVitro Diagnostics |
7-290 |
Partial |
CLSI |
EP34 1st Edition |
Establishing and Verifying an Extended Measuring Interval Through Specimen Dilution and Spiking |
| 08/14/2015 |
InVitro Diagnostics |
7-255 |
Partial |
CLSI |
MM09-A2 (Replaces MM09-A) |
Nucleic Acid Sequencing Methods in Diagnostic Laboratory Medicine: Approved Guideline -- Second Edition |
| 06/07/2021 |
InVitro Diagnostics |
7-262 |
Partial |
CLSI |
M45 3rd Edition |
Methods for Antimicrobial Dilution and Disk Susceptibility Testing of Infrequently Isolated or Fastidious Bacteria |
| 01/14/2019 |
InVitro Diagnostics |
7-269 |
Partial |
CLSI |
MM23-1st Edition |
Molecular Diagnostic Methods for Solid Tumors (Nonhematological Neoplasms) |
| 06/07/2021 |
InVitro Diagnostics |
7-236 |
Partial |
CLSI |
M43-A October 2011 |
Methods for Antimicrobial Susceptibility Testing for Human Mycoplasmas; Approved Guideline |
| 01/30/2014 |
InVitro Diagnostics |
7-210 |
Partial |
CLSI |
H26-A2 |
Validation, Verification, and Quality Assurance of Automated Hematology Analyzers; Proposed Standard - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-328 |
Partial |
CLSI |
M100 35th Edition |
Performance Standards for Antimicrobial Susceptibility Testing |
| 12/18/2023 |
InVitro Diagnostics |
7-320 |
Partial |
CLSI |
H62 1st Edition |
Validation of Assays Performed by Flow Cytometry |
| 01/27/2015 |
InVitro Diagnostics |
7-250 |
Partial |
CLSI |
M40-A2 (Reaffirmed: September 2019) |
Quality Control of Microbiological Transport Systems; Approved Standard - Second Edition. |
| 05/26/2025 |
InVitro Diagnostics |
7-330 |
Partial |
CLSI |
M38M51S 3rd Edition |
Performance Standards for Antifungal Susceptibility Testing of Filamentous Fungi |
| 01/30/2014 |
InVitro Diagnostics |
7-220 |
Partial |
CLSI |
H59-A (Replaces H59-P) |
Quantitative D-dimer for the Exclusion of Venous Thromboembolic Disease; Approved Guideline. |
| 08/06/2013 |
InVitro Diagnostics |
7-234 |
Partial |
CLSI |
EP24-A2 (Replaces GP 10-A) |
Assessment of the Diagnostic Accuracy of Laboratory Tests Using Receiver Operating Characteristic Curves; Approved Guideline - Second Edition |
| 12/23/2024 |
InVitro Diagnostics |
7-326 |
Partial |
CLSI |
M24S 2nd Edition |
Performance Standards for Susceptibility Testing of Mycobacteria, Nocardia spp., and Other Aerobic Actinomycetes |
| 05/29/2023 |
InVitro Diagnostics |
7-317 |
Partial |
CLSI |
M100 33rd, Edition |
Performance Standards for Antimicrobial Susceptibility Testing |
| 12/19/2022 |
InVitro Diagnostics |
7-314 |
Partial |
CLSI |
M27M44S, 3rd Edition |
Performance Standards for Antifungal Susceptibility Testing of Yeasts |
| 12/23/2024 |
InVitro Diagnostics |
7-327 |
Partial |
CLSI |
M100 34th Edition |
Performance Standards for Antimicrobial Susceptibility Testing |
| 12/23/2024 |
InVitro Diagnostics |
7-325 |
Partial |
CLSI |
M02 14th Edition |
Performance Standards for Antimicrobial Disk Susceptibility Tests |
| 08/06/2013 |
InVitro Diagnostics |
7-243 |
Partial |
CLSI |
M51-A (Replaces M51-P) |
Method for Antifungal Disk Diffusion Susceptibility Testing of Nondermatophyte Filamentous Fungi; Approved Guideline |
| 06/27/2016 |
InVitro Diagnostics |
7-264 |
Partial |
CLSI |
MM21-1st Edition (Reaffirmed: January 2020) |
Genomic Copy Number Microarrays for Constitutional Genetic and Oncology Applications |
| 06/07/2021 |
InVitro Diagnostics |
7-292 |
Partial |
CLSI |
M62 1st Edition |
Performance Standards for Susceptibility Testing of Mycobacteria, Nocardia spp., and other Aerobic Actinomycetes |
| 09/21/2016 |
InVitro Diagnostics |
7-265 |
Partial |
CLSI |
C62-A |
Liquid Chromatography-Mass Spectrometry Methods; Approved Guideline. |
| 01/14/2019 |
InVitro Diagnostics |
7-139 |
Complete |
CLSI |
QMS24, 3rd Edition September 2016 Replaces GP27-A2 and GP29-A2 |
Using Proficiency Testing to Improve the Clinical Laboratory; Approved Guideline - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-338 |
Complete |
CLSI |
AUTO10-A |
Autoverification of Clinical Laboratory Test Results; Approved Guideline |
| 05/26/2025 |
InVitro Diagnostics |
7-337 |
Complete |
CLSI |
AUTO08-A |
Managing and Validating Laboratory Information Systems; Approved Guideline |
| 06/07/2021 |
InVitro Diagnostics |
7-306 |
Complete |
CLSI |
EP06 2nd Edition |
Evaluation of the Linearity of Quantitative Measurement Procedures |
| 07/15/2019 |
InVitro Diagnostics |
7-287 |
Complete |
CLSI |
M44-S3 (2018) |
Zone Diameter Interpretive Standards, Corresponding Minimal Inhibitory Concentration (MIC) Interpretive Breakpoints, and Quality Control Limits for Antifungal Disk Diffusion Susceptibility Testing of Yeasts; Third Informational Supplement |
| 07/15/2019 |
InVitro Diagnostics |
7-288 |
Complete |
CLSI |
M24 3rd Edition |
Susceptibility Testing of Mycobacteria, Nocardiae and other Aerobic Actinomycetes |
| 05/26/2025 |
InVitro Diagnostics |
7-335 |
Complete |
CLSI |
POCT01-A2 |
Point-of-Care Connectivity - Second Edition |
| 03/18/2009 |
InVitro Diagnostics |
7-190 |
Complete |
CLSI |
M50-A (Replaces M50-P) |
Quality Control for Commercial Microbial Identification Systems; Approved Guideline |
| 03/18/2009 |
InVitro Diagnostics |
7-192 |
Complete |
CLSI |
MM18-A (Replaces MM18-P) |
Interpretive Criteria for Indentification of Bacteria and Fungi by DNA Target Sequencing; Approved Guideline |
| 03/18/2009 |
InVitro Diagnostics |
7-170 |
Complete |
CLSI |
I/LA21-A2 |
Clinical Evaluation of Immunoassays; Approved Guideline - Second Edition |
| 03/18/2009 |
InVitro Diagnostics |
7-176 |
Complete |
CLSI |
I/LA30-A (Replaces I/LA30-P) |
Immunoassay Interference by Endogenous Antibodies; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-180 |
Complete |
CLSI |
M34-A (Replaces M24-P) |
Western Blot Assay for Antibodies to Borrelia burgdorferi; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-182 |
Complete |
CLSI |
M36-A |
Clinical Use and Interpretation of Serologic Tests for Toxoplasma gondii; Approved Guideline. |
| 03/18/2009 |
InVitro Diagnostics |
7-185 |
Complete |
CLSI |
M41-A |
Viral Culture; Approved Guideline. |
| 07/09/2014 |
InVitro Diagnostics |
7-175 |
Complete |
CLSI |
C59-A |
Apoplipoprotein Immunoassays: Development and Recommended Performance Characteristics; Approved Guideline |
| 08/21/2017 |
InVitro Diagnostics |
7-273 |
Complete |
CLSI |
M58 1st Edition |
Methods for Identification of Cultured Microorganisms Using Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry |
| 05/26/2025 |
InVitro Diagnostics |
7-334 |
Complete |
CLSI |
AUTO05-A |
Laboratory Automation: Electromechanical Interfaces; Approved Standard |
| 12/20/2021 |
InVitro Diagnostics |
7-310 |
Complete |
ISO |
19238 Second edition 2014-02-01 |
Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
| 05/05/2010 |
InVitro Diagnostics |
7-205 |
Complete |
CLSI |
H47-A2 |
One-Stage Prothrombin Time (PT) Test and Activated Partial Thromboplastin Time (APTT) Test; Approved Guideline - Second Edition. |
| 05/05/2010 |
InVitro Diagnostics |
7-207 |
Complete |
CLSI |
GP16-A3 (Replaces GP16-A2) |
Urinalysis; Approved Guideline - Third Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-345 |
Complete |
CLSI |
AUTO13-A2 (Formerly GP19-A2) |
Laboratory Instruments and Data Management Systems: Design of Software User Interfaces and End-User Software Systems Validation, Operation, and Monitoring; Approved Guideline - Second Edition |
| 09/09/2008 |
InVitro Diagnostics |
7-21 |
Complete |
CLSI |
C42-A |
Erythrocyte Protoporphyrin Testing; Approved Guideline |
| 09/09/2008 |
InVitro Diagnostics |
7-136 |
Complete |
CLSI |
I/LA2-A2 (Replaces I/LA2-A) |
Quality Assurance of Laboratory Tests for Autoantibodies to Nuclear Antigens: (1) Indirect Flurescence Assay for Microscopy and (2) Microtiter Enzyme Immunoassay Methods; Approved Guideline - Second Edition. |
| 09/09/2008 |
InVitro Diagnostics |
7-159 |
Complete |
CLSI |
H21-A5 |
Collection, Transport, and Processing of Blood Specimens for Testing Plasma-Based Coagulation Assays and Molecular Hemostasis Assays |
| 09/09/2008 |
InVitro Diagnostics |
7-163 |
Complete |
CLSI |
H56-A (Replaces H56-P) |
Body Fluid Analysis for Cellular Composition; Approved Guideline. |
| 05/26/2025 |
InVitro Diagnostics |
7-341 |
Complete |
CLSI |
AUTO03-A2 |
Laboratory Automation: Communications with Automated Clinical Laboratory Systems, Instruments, Devices, and Information Systems; Approved Standard - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-343 |
Complete |
CLSI |
AUTO07-A |
Laboratory Automation: Data Content for Specimen Identification; Approved Standard |
| 09/17/2018 |
InVitro Diagnostics |
7-275 |
Complete |
CLSI |
EP07 3rd Edition |
Interference Testing in Clinical Chemistry. |
| 09/17/2018 |
InVitro Diagnostics |
7-276 |
Complete |
CLSI |
M38 3rd Edition |
Reference Method for Broth Dilution Antifungal Susceptibility Testing of Filamentous Fungi |
| 04/04/2016 |
InVitro Diagnostics |
7-260 |
Complete |
CLSI |
MM03-3rd Edition (Replaces MM03-A2) |
Molecular Diagnostic Methods for Infectious Diseases; Approved Guideline |
| 01/14/2019 |
InVitro Diagnostics |
7-286 |
Complete |
CLSI |
M11 9th Edition |
Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria; Approved Standard-Eighth Edition. |
| 08/14/2015 |
InVitro Diagnostics |
7-253 |
Complete |
CLSI |
EP15-A3 (Reaffirmed: September 2019) |
User Verification of Precision and Estimation of Bias; Approved Guideline - Third Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-340 |
Complete |
CLSI |
LIS01-A2 |
Standard Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems - Second Edition. |
| 08/21/2017 |
InVitro Diagnostics |
7-270 |
Complete |
CLSI |
I/LA-20 3rd Edition (Replaces I/LA20-A3) |
Analytical Performance Characteristics, Quality Assurance, and Clinical Utility of Immunological Assays for Human Immunoglobulin E Antibodies of Defined Allergen Specificities |
| 05/26/2025 |
InVitro Diagnostics |
7-336 |
Complete |
CLSI |
LIS02-A2 |
Standard Specification for Transferring Information Between Clinical Instruments and Computer Systems; Approved Standard-Second Edition. |
| 08/02/2011 |
InVitro Diagnostics |
7-219 |
Complete |
CLSI |
I/LA28-A2 |
Quality Assurance for Design Control and Implementation of Immunohistochemistry Assays; Approved Guidelines-Second Edition. |
| 03/16/2012 |
InVitro Diagnostics |
7-227 |
Complete |
CLSI |
M53-A (Replaces M53-P) |
Criteria for Laboratory Testing and Diagnosis of Human Immunodeficiency Virus Infection; Approved Guideline |
| 01/15/2013 |
InVitro Diagnostics |
7-233 |
Complete |
CLSI |
EP17-A2 |
Evaluation of Detection Capability for Clinical Laboratory Measurement Procedures; Approved Guideline - Second Edition |
| 01/15/2013 |
InVitro Diagnostics |
7-237 |
Complete |
CLSI |
MM01-A3 (Replaces MM01-A2) |
Molecular Methods for Clinical Genetics and Oncology Testing; Approved Guideline - Third Edition |
| 01/15/2013 |
InVitro Diagnostics |
7-238 |
Complete |
CLSI |
MM06-A2 (Replaces MM06-A) |
Quantitative Molecular Methods for Infectious Diseases; Approved Guideline - Second Edition |
| 08/14/2015 |
InVitro Diagnostics |
7-257 |
Complete |
CLSI |
M56-A |
Principles and procedures for Detection of Anaerobes in Clinical Specimens; Approved Guideline |
| 03/18/2009 |
InVitro Diagnostics |
7-145 |
Complete |
CLSI |
H42-A2 (Replaces H42-A) |
Enumeration of Immunologically Defined Cell Populations by Flow Cytometry; Approved Guideline - Second Edition. |
| 01/14/2019 |
InVitro Diagnostics |
7-178 |
Complete |
CLSI |
M22-A3 Vol 24 No. 19 Replaces M22-A2 Vol. 16 No. 16 |
Quality Control for Commercially Prepared Microbiological Culture Media; Approved Standard - Third Edition |
| 12/22/2025 |
InVitro Diagnostics |
7-349 |
Complete |
CLSI |
EP35 2nd Edition |
Assessment of Equivalence or Suitability of Specimen Types for Medical Laboratory Measurement Procedures |
| 07/06/2020 |
InVitro Diagnostics |
7-298 |
Complete |
CLSI |
EP35, 1st Edition |
Assessment of Equivalence or Suitability of Specimen Types for Medical Laboratory Measurement Procedures |
| 12/22/2025 |
InVitro Diagnostics |
7-351 |
Complete |
CLSI |
EP46 1st Edition |
Determining Allowable Total Error Goals and Limits for Quantitative Medical Laboratory Measurement Procedures |
| 01/30/2014 |
InVitro Diagnostics |
7-239 |
Complete |
CLSI |
EP32-R (Formerly X05-R) |
Metrological Traceability and Its Implementation; A Report |
| 12/22/2025 |
InVitro Diagnostics |
7-347 |
Complete |
CLSI |
EP21 3rd Edition |
Evaluation of Total Analytical Error for Quantitative Medical Laboratory Measurement Procedures |
| 12/22/2025 |
InVitro Diagnostics |
7-348 |
Complete |
CLSI |
EP37 2nd Edition |
Supplemental Tables for Interference Testing in Clinical Chemistry |
| 09/17/2018 |
InVitro Diagnostics |
7-284 |
Complete |
CLSI |
EP37 1st Edition |
Supplemental Tables for Interference Testing in Clinical Chemistry |
| 05/26/2025 |
InVitro Diagnostics |
7-339 |
Complete |
CLSI |
AUTO09-A |
Remote Access to Clinical Laboratory Diagnostic Devices via the Internet; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-332 |
Complete |
CLSI |
AUTO01-A |
Laboratory Automation: Specimen Container/Specimen Carrier; Approved Standard |
| 03/08/2004 |
InVitro Diagnostics |
7-86 |
Complete |
CLSI |
C29-A2 (Replaces C29-A) |
Standardization of Sodium and Potassium Ion Selective Electrode Systems to the Flame Photometric Reference Method; Approved Standard - Second Edition |
| 03/08/2004 |
InVitro Diagnostics |
7-87 |
Complete |
CLSI |
C31-A2 (Replaces C31-A) |
Ionized Calcium Determinations: Precollection Variables, Specimen Choice, Collection, and Handling; Approved Guideline - Second Edition. |
| 03/08/2004 |
InVitro Diagnostics |
7-88 |
Complete |
CLSI |
C37-A |
Preparation and Validation of Commutable Frozen Human Serum Pools as Secondary Reference Materials for Cholesterol Measurement Procedures; Approved Guideline |
| 03/08/2004 |
InVitro Diagnostics |
7-89 |
Complete |
CLSI |
C39-A (Replaces C39-P) |
A Designated Comparison Method for the Measurement of Ionized Calcium in Serum; Approved Standard |
| 10/04/2004 |
InVitro Diagnostics |
7-105 |
Complete |
CLSI |
H30-A2 |
Procedure for the Determination of Fibrinogen in Plasma; Approved Guideline Second Edition |
| 10/04/2004 |
InVitro Diagnostics |
7-104 |
Complete |
CLSI |
H7-A3 |
Procedure for Determining Packed Cell Volume by the Microhematocrit Method - Second Edition; Approved Standard - Third Edition. |
| 12/23/2019 |
InVitro Diagnostics |
7-295 |
Complete |
CLSI |
M52, 1st ed. August 2015 (Reaffirmed: January 2020) |
Verification of Commercial Microbial Identification and Antimicrobial Susceptibility Testing Systems. |
| 07/09/2014 |
InVitro Diagnostics |
7-48 |
Complete |
CLSI |
C60-A |
Blood Alcohol Testing in the Clinical Laboratory; Approved Guideline |
| 07/09/2014 |
InVitro Diagnostics |
7-221 |
Complete |
CLSI |
GP39-A6 (Formerly H01-A6) |
Tubes and Additives for Venous Blood Specimen Collection; Approved Standard-Sixth Edition |
| 12/21/2020 |
InVitro Diagnostics |
7-299 |
Complete |
CLSI |
POCT14 2nd Edition |
Point-of-Care Coagulation Testing and Anticoagulation Monitoring |
| 06/07/2021 |
InVitro Diagnostics |
7-307 |
Complete |
CLSI |
POCT05 2nd Edition |
Performance Metrics for Continuous Interstitial Glucose Monitoring |
| 08/20/2012 |
InVitro Diagnostics |
7-76 |
Complete |
CLSI |
M15-A (Replaces M15-T) |
Laboratory Diagnosis of Blood-borne Parasitic Diseases; Approved Guideline |
| 08/20/2012 |
InVitro Diagnostics |
7-197 |
Complete |
CLSI |
M35-A2 (Replaces M35-A) |
Abbreviated Identification of Bacteria and Yeast; Approved Guideline - Second Edition. |
| 09/17/2018 |
InVitro Diagnostics |
7-278 |
Complete |
CLSI |
M27 4th Edition |
Reference Method for Broth Dilution Antifungal Susceptibility Testing of Yeasts |
| 08/06/2013 |
InVitro Diagnostics |
7-242 |
Complete |
CLSI |
C56-A |
Hemolysis, Icterus, and Lipemia/Turbidity Indices as Indicators of Interference in Clinical Laboratory Analysis; Approved Guideline |
| 05/30/2022 |
InVitro Diagnostics |
7-312 |
Complete |
CLSI |
M39 5th Edition |
Analysis and Presentation of Cumulative Antimicrobial Susceptibility Test Data |
| 09/17/2018 |
InVitro Diagnostics |
7-277 |
Complete |
CLSI |
GP41 7th Edition |
Collection of Diagnostic Venous Blood Specimens |
| 12/23/2019 |
InVitro Diagnostics |
7-293 |
Complete |
CLSI |
QMS01, 5th ed. June 2019 (Replaces QMS01-A4) |
A Quality Management System Model for Laboratory Services. |
| 10/04/2010 |
InVitro Diagnostics |
7-212 |
Complete |
CLSI |
EP18-A2 |
Risk Management Techniques to Identify and Control Laboratory Error Sources; Approved Guideline - Second Edition |
| 12/21/2020 |
InVitro Diagnostics |
7-302 |
Complete |
CLSI |
C34 4th Edition |
Sweat Testing: Specimen Collection and Quantitative Chloride Analysis |
| 08/20/2012 |
InVitro Diagnostics |
7-148 |
Complete |
CLSI |
M28-A2 (Replaces M28-A) |
Procedures for the Recovery and Identification of Parasites from the Intestinal Tract; Approved Guideline - Second Edition. |
| 12/21/2020 |
InVitro Diagnostics |
7-305 |
Complete |
ISO |
17511 Second edition 2020-04 |
In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples |
| 12/20/2021 |
InVitro Diagnostics |
7-309 |
Complete |
ISO |
17099 First edition 2014-11-15 |
Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry |
| 09/17/2018 |
InVitro Diagnostics |
7-279 |
Complete |
CLSI |
M07 11th Edition |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically |
| 09/17/2018 |
InVitro Diagnostics |
7-280 |
Complete |
CLSI |
M02 13th Edition |
Performance Standards for Antimicrobial Disk Susceptibility Tests |
| 12/21/2020 |
InVitro Diagnostics |
7-300 |
Complete |
CLSI |
MM13 2nd Edition |
Collection, Transport, Preparation, and Storage of Specimens for Molecular Methods |
| 12/21/2020 |
InVitro Diagnostics |
7-301 |
Complete |
CLSI |
GP42 7th Edition |
Collection of Capillary Blood Specimens |
| 05/26/2025 |
InVitro Diagnostics |
7-331 |
Complete |
CLSI |
AUTO02-A2 |
Laboratory Automation: Bar Codes for Specimen Container Identification - Second Edition |
| 01/14/2019 |
InVitro Diagnostics |
7-232 |
Complete |
CLSI |
MM05-A2 Vol. 32 No. 6 Replaces MM05-A Vol. 23 No. 17 |
Nucleic Acid Amplification Assays for Molecular Hematopathology; Approved Guideline - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-342 |
Complete |
CLSI |
AUTO12-A |
Specimen Labels: Content and Location, Fonts, and Label Orientation; Approved Standard |
| 09/17/2018 |
InVitro Diagnostics |
7-283 |
Complete |
CLSI |
POCT04 3rd Edition |
Essential Tools for Implementation and Management of a Point-of-Care Testing Program |
| 07/09/2014 |
InVitro Diagnostics |
7-213 |
Complete |
CLSI |
GP44-A4 (Formerly H18-A4) |
Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests; Approved Guideline-Fourth Edition |
| 03/18/2009 |
InVitro Diagnostics |
7-189 |
Complete |
CLSI |
M47-A (Replaces M47-P) |
Principles and Procedures for Blood Cultures; Approved Guideline |
| 12/20/2021 |
InVitro Diagnostics |
7-311 |
Complete |
CLSI |
EP39, 1st Edition |
A Hierarchical Approach to Selecting Surrogate Samples for the Evaluation of In Vitro Medical Laboratory Tests |
| 08/14/2015 |
InVitro Diagnostics |
7-251 |
Complete |
CLSI |
EP05-A3 (Reaffirmed: September 2019) |
Evaluation of Precision of Quantitative Measurement Procedures; Approved Guideline - Third Edition |
| 08/14/2015 |
InVitro Diagnostics |
7-252 |
Complete |
CLSI |
EP14-A3 |
Evaluation of Commutability of Processed Samples; Approved Guideline - Third Edition |
| 12/23/2024 |
InVitro Diagnostics |
7-323 |
Complete |
CLSI |
EP19 3rd Edition |
A Framework for Using CLSI Documents to Evaluate Clinical Laboratory Measurement Procedures |
| 03/18/2009 |
InVitro Diagnostics |
7-71 |
Complete |
CLSI |
H15-A3 (Replaces H15-A2) |
Reference and Selected Procedures for the Quantitative Determination of Hemoglobin in Blood; Approved Standard - Third Edition |
| 05/29/2023 |
InVitro Diagnostics |
7-315 |
Complete |
CLSI |
EP12 3rd Edition |
Evaluation of Qualitative, Binary Output Examination Performance |
| 05/29/2023 |
InVitro Diagnostics |
7-316 |
Complete |
CLSI |
NBS01 7th Edition |
Dried Blood Spot Specimen Collection for Newborn Screening |
| 03/16/2012 |
InVitro Diagnostics |
7-165 |
Complete |
CLSI |
H20-A2 (Replaces H20-A) |
Reference Leukocyte (WBC) Differential Count (Proportional) and Evaluation of Instrumental Methods; Approved Standard - Second Edition |
| 03/16/2012 |
InVitro Diagnostics |
7-166 |
Complete |
CLSI |
GP20-A2 (Replaces GP20-A) |
Fine Needle Aspiration Biopsy (FNAB) Techniques; Approved Guideline - Second Edition |
| 03/16/2012 |
InVitro Diagnostics |
7-225 |
Complete |
CLSI |
GP34-A (Replaces GP34-P) |
Validation and Verfication of Tubes for Venous and Capillary Blood Specimen Collection; Approved Guidance |
| 11/08/2005 |
InVitro Diagnostics |
7-113 |
Complete |
CLSI |
I/LA23-A (Replaces I/LA23-P) |
Assessing the Quality of Immunoassay Systems: Radioimmunoassays, and Enzyme, Fluorescence, and Luminescence Immunoassays; Approved Guideline |
| 12/23/2024 |
InVitro Diagnostics |
7-324 |
Complete |
CLSI |
M07 12th Edition |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically |
| 03/16/2012 |
InVitro Diagnostics |
7-150 |
Complete |
CLSI |
H43-A2 |
Clinical Flow Cytometry Analysis of Neoplastic Hematolymphoid Cells; Approved Guideline - Second Edition |
| 01/30/2014 |
InVitro Diagnostics |
7-224 |
Complete |
CLSI |
EP28-A3c (Formerly C28-A3c) |
Defining, Establishing, and Verifying Reference Intervals in the Clinical Laboratory; Approved Guideline - Third Edition |
| 01/30/2014 |
InVitro Diagnostics |
7-223 |
Complete |
CLSI |
QMS06-A3 (Formerly GP22-A3) |
Quality Management System: Continual Improvement; Approved Guideline - Third Edition |
| 12/22/2025 |
InVitro Diagnostics |
7-346 |
Complete |
CLSI |
EP32 2nd Edition |
Implementation of Metrological Traceability in Laboratory Medicine |
| 05/26/2025 |
InVitro Diagnostics |
7-344 |
Complete |
CLSI |
AUTO11-A2 |
Information Technology Security of In Vitro Diagnostic Instruments and Software Systems; Approved Standard - Second Edition |
| 12/23/2016 |
InVitro Diagnostics |
7-267 |
Complete |
CLSI |
C24 4th Edition (Replaces C24-A3) |
Statistical Quality Control for Quantitative Measurement Procedures: Principles and Definitions |
| 05/26/2025 |
InVitro Diagnostics |
7-329 |
Complete |
CLSI |
EP06-EG 2nd Edition |
Developer Validation of Linearity, Establishment Guide |
| 12/23/2024 |
InVitro Diagnostics |
7-322 |
Complete |
CLSI |
M47 2nd Edition |
Principles and Procedures for Blood Cultures |
| 05/26/2025 |
InVitro Diagnostics |
7-333 |
Complete |
CLSI |
AUTO04-A |
Laboratory Automation: Systems Operational Requirements, Characteristics, and Information Elements; Approved Standard |
| 12/18/2023 |
InVitro Diagnostics |
7-319 |
Complete |
CLSI |
M23 6th Edition |
Development of In Vitro Susceptibility Test Methods, Breakpoints, and Quality Control Parameters |
| 12/19/2022 |
InVitro Diagnostics |
7-313 |
Complete |
CLSI |
EP27 2nd Edition |
Constructing and Interpreting an Error Grid for Quantitative Measurement Procedures |
| 12/18/2023 |
InVitro Diagnostics |
7-318 |
Complete |
CLSI |
EP25 2nd Edition |
Evaluation of Stability of In Vitro Medical Laboratory Test Reagents |
| 07/06/2020 |
InVitro Diagnostics |
7-297 |
Complete |
ISO |
TS 20914 First edition 2019-07 |
Medical laboratories - Practical guidance for the estimation of measurement uncertainty |
| 01/14/2019 |
InVitro Diagnostics |
7-285 |
Complete |
CLSI |
M48-A 2nd Edition |
Laboratory Detection and Identification of Mycobacteria |
| 12/20/2021 |
Materials |
8-572 |
Complete |
ASTM |
F2565-21 |
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
| 12/20/2021 |
Materials |
8-573 |
Complete |
ASTM |
F2695-12(2025) |
Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
| 05/30/2022 |
Materials |
8-591 |
Complete |
ASTM |
F2229-21 |
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| 05/30/2022 |
Materials |
8-587 |
Complete |
ISO |
5832-3 Fifth Edition 2021-11 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| 12/20/2021 |
Materials |
8-564 |
Complete |
ASTM |
F2005-21 |
Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| 12/20/2021 |
Materials |
8-565 |
Complete |
ASTM |
F2754/F2754M-21 |
Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire |
| 01/14/2019 |
Materials |
8-482 |
Complete |
ASTM |
D1505-18 |
Standard Test Method for Density of Plastics by the Density-Gradient Technique |
| 12/18/2023 |
Materials |
8-607 |
Complete |
ASTM |
F2082/F2082M-23 |
Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/23/2016 |
Materials |
8-437 |
Complete |
ASTM |
F2082/F2082M-16 |
Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 01/14/2019 |
Materials |
8-487 |
Complete |
ISO ASTM |
52910-18 |
Additive manufacturing - Design - Requirements, guidelines and recommendations |
| 12/18/2023 |
Materials |
8-605 |
Complete |
ASTM |
F1609-23 |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 09/17/2018 |
Materials |
8-412 |
Complete |
ASTM |
F2537-06 (Reapproved 2017) |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 05/30/2022 |
Materials |
8-584 |
Complete |
ASTM |
F2146-22 |
Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| 05/30/2022 |
Materials |
8-585 |
Complete |
ASTM |
F1377-21 |
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
| 05/30/2022 |
Materials |
8-586 |
Complete |
ASTM |
F2989-21 |
Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| 12/20/2021 |
Materials |
8-570 |
Complete |
ASTM |
F1108-21 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| 12/20/2021 |
Materials |
8-571 |
Complete |
ASTM |
F2052-21 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
| 12/23/2016 |
Materials |
8-435 |
Complete |
ISO |
5832-1 Fifth edition 2016-07-15 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel |
| 04/04/2016 |
Materials |
8-405 |
Complete |
ISO |
5832-4 Third edition 2014-09-15 |
Implants for surgery -- Metallic materials -- Part 4: Cobalt-chromium-molybdenum casting alloy |
| 04/04/2016 |
Materials |
8-406 |
Complete |
ISO |
5832-11 Second edition 2014-09-15 |
Implants for surgery -- Metallic materials -- Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 12/23/2016 |
Materials |
8-442 |
Complete |
ASTM |
F3127-16 |
Standard Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices |
| 12/23/2016 |
Materials |
8-444 |
Complete |
ISO |
17296-2 First edition 2015-01-15 |
Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock |
| 09/17/2018 |
Materials |
8-476 |
Complete |
ASTM |
F2004-17 |
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| 12/23/2024 |
Materials |
8-624 |
Complete |
ASTM |
F2129-24 |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| 12/23/2024 |
Materials |
8-622 |
Complete |
ASTM |
F2004-24 |
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| 12/20/2021 |
Materials |
8-574 |
Complete |
ASTM |
F2820-12(2021)e1 |
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
| 12/22/2025 |
Materials |
8-644 |
Complete |
ASTM |
F2848-25 |
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
| 08/14/2015 |
Materials |
8-389 |
Complete |
ISO |
15309 First edition 2013-12-01 |
Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
| 12/18/2023 |
Materials |
8-609 |
Complete |
ASTM |
F2026-23 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 09/17/2018 |
Materials |
8-475 |
Complete |
ASTM |
F2026-17 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 05/29/2024 |
Materials |
8-617 |
Complete |
ISO ASTM |
52926-3 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 3: Qualification of operators for PBF-EB |
| 12/23/2024 |
Materials |
8-618 |
Complete |
ASTM |
F1350-24 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| 05/29/2024 |
Materials |
8-614 |
Complete |
ASTM |
F3456-22 |
Standard Guide for Powder Reuse Schema in Powder Bed Fusion Processes for Medical Applications for Additive Manufacturing Feedstock Materials |
| 05/29/2024 |
Materials |
8-615 |
Complete |
ISO ASTM |
52926-1 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 1: General qualification of operators |
| 09/17/2018 |
Materials |
8-112 |
Complete |
ASTM |
F1044-05 (Reapproved 2017)e1 |
Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| 09/17/2018 |
Materials |
8-466 |
Complete |
ASTM |
F2213-17 |
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
| 04/04/2016 |
Materials |
8-393 |
Complete |
ASTM |
F1350-15 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| 12/23/2024 |
Materials |
8-621 |
Complete |
ISO |
5832-1 Sixth edition 2024-04 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel |
| 04/04/2016 |
Materials |
8-135 |
Complete |
ASTM |
F2392-04 (Reapproved 2015) |
Standard Test Method for Burst Strength of Surgical Sealants |
| 06/07/2018 |
Materials |
8-464 |
Complete |
ISO |
TS 10974 Second edition 2018 |
Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device |
| 05/29/2024 |
Materials |
8-616 |
Complete |
ISO ASTM |
52926-2 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 2: Qualification of operators for PBF-LB |
| 04/04/2016 |
Materials |
8-114 |
Complete |
ASTM |
F2255-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in Lap Shear by Tension Loading |
| 12/21/2020 |
Materials |
8-547 |
Complete |
ASTM |
F629-20 |
Standard Practice for Radiography of Cast Metallic Surgical Implants |
| 12/22/2025 |
Materials |
8-642 |
Complete |
ASTM |
F2895-24 |
Standard Practice for Digital Radiography of Cast Metallic Implants |
| 05/29/2023 |
Materials |
8-604 |
Complete |
ASTM |
F2257-22 |
Standard Specification for Wrought Seamless or Welded and Drawn 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
| 05/29/2023 |
Materials |
8-597 |
Complete |
ASTM |
F2003-02(2022) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
| 12/22/2025 |
Materials |
8-641 |
Complete |
ASTM |
F629-24 |
Standard Practice for Radiography of Cast Metallic Surgical Implants |
| 05/29/2023 |
Materials |
8-598 |
Complete |
ASTM |
F3109-22 |
Standard Test Method for Verification of Multi-Axis Force Measuring Platforms |
| 12/20/2021 |
Materials |
8-568 |
Complete |
ASTM |
F1586-21 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium-10 Nickel-3 Manganese-2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
| 05/30/2022 |
Materials |
8-593 |
Complete |
ISO |
13779-6 First Edition 2015-01-15 Corrected Version 2016-09-15 |
Implants for surgery - Hydroxyapatite - Part 6: Powders |
| 12/22/2025 |
Materials |
8-632 |
Complete |
ASTM |
F1058-25 |
Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| 05/30/2022 |
Materials |
8-588 |
Complete |
ASTM |
F560-22 |
Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
| 05/30/2022 |
Materials |
8-583 |
Complete |
ASTM |
F562-22 |
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| 12/20/2021 |
Materials |
8-566 |
Complete |
ASTM |
F1813-21 |
Standard Specification for Wrought Titanium - 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical Implant (UNS R58120) |
| 12/20/2021 |
Materials |
8-567 |
Complete |
ASTM |
F86-21 |
Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
| 04/04/2016 |
Materials |
8-408 |
Complete |
ASTM |
F3122-14 |
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| 07/09/2014 |
Materials |
8-379 |
Complete |
ISO |
11542-2 First edition 1998-11-15 |
Plastics - Ultra-high-molecular-weight polyethyelene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties [Including: Technical Corrigendum 1 (2007)] |
| 12/21/2020 |
Materials |
8-539 |
Complete |
ASTM |
F139-19 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| 05/30/2022 |
Materials |
8-592 |
Complete |
ASTM |
F3384-21 |
Standard Specification for Polydioxanone Polymer Resins for Surgical Implants |
| 01/30/2014 |
Materials |
8-344 |
Complete |
ISO |
7153-1 Second edition 1991-04-01 |
Surgical instruments -- Metallic materials -- Part 1: Stainless steel [Including: Amendment 1 (1999)] |
| 08/21/2017 |
Materials |
8-457 |
Complete |
ISO |
13175-3 First edition 2012-10-01 |
Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| 01/14/2019 |
Materials |
8-485 |
Complete |
ASTM |
F3260-18 |
Standard Test Method for Determining the Flexural Stiffness of Medical Textiles |
| 05/25/2026 |
Materials |
8-648 |
Complete |
ASTM |
F799-25 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| 08/21/2017 |
Materials |
8-449 |
Complete |
ASTM |
F1058-16 |
Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| 12/22/2025 |
Materials |
8-633 |
Complete |
ASTM |
F2902-24 |
Standard Guide for Assessment of Absorbable Polymeric Implants |
| 05/30/2022 |
Materials |
8-589 |
Complete |
ASTM |
F1925-22 |
Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
| 12/22/2025 |
Materials |
8-628 |
Complete |
ASTM |
F754-24 |
Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders |
| 12/20/2021 |
Materials |
8-563 |
Complete |
ASTM |
F1801-20 |
Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
| 12/21/2020 |
Materials |
8-545 |
Complete |
ASTM |
F2977-20 |
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
| 12/21/2020 |
Materials |
8-549 |
Complete |
ASTM |
F3208-20 |
Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
| 05/29/2023 |
Materials |
8-600 |
Complete |
ASTM |
F1978-22 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 05/29/2023 |
Materials |
8-601 |
Complete |
ASTM |
F2516-22 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| 05/29/2023 |
Materials |
8-603 |
Complete |
ASTM |
F1472-23 |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| 12/19/2022 |
Materials |
8-595 |
Complete |
ISO |
5832-5 Fourth Edition 2022-03 |
Implants for surgery -- Metallic materials -- Part 5: Wrought cobalt-chromium-tungsten-nickel |
| 01/27/2015 |
Materials |
8-171 |
Complete |
ASTM |
F1609-08 (Reapproved 2014) |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 12/18/2023 |
Materials |
8-606 |
Complete |
ASTM |
F2537-23 |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 12/20/2021 |
Materials |
8-579 |
Complete |
ISO |
13779-3 Second Edition 2018-12 |
Implants for surgery -- Hydroxyapatite -- Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity [Including AMENDMENT 1 (2021)] |
| 12/20/2021 |
Materials |
8-575 |
Complete |
ASTM |
F3160-21 |
Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| 12/20/2021 |
Materials |
8-577 |
Complete |
ISO |
13179-1 Second Edition 2021-09 |
Implants for surgery -- Coatings on metallic surgical implants -- Part 1: Plasma-sprayed coatings derived from titanium or titanium-6 aluminum-4 vanadium alloy powders |
| 12/19/2022 |
Materials |
8-594 |
Complete |
ISO |
5832-6 Third Edition 2022-03 |
Implants for surgery -- Metallic materials -- Part 6:Wrought cobalt-nickel-chromium-molybdenum alloy |
| 12/23/2019 |
Materials |
8-491 |
Complete |
ASTM |
F1088-18 |
Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation |
| 06/07/2021 |
Materials |
8-561 |
Complete |
ISO ASTM |
52950 First edition 2021-01 |
Additive manufacturing - General principles - Overview of data processing |
| 12/23/2019 |
Materials |
8-520 |
Complete |
ASTM |
F799-19 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| 07/15/2019 |
Materials |
8-495 |
Complete |
ISO |
5834-3 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3: Accelerated ageing methods |
| 09/17/2018 |
Materials |
8-468 |
Complete |
ASTM |
F2459-18 |
Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis |
| 01/27/2015 |
Materials |
8-383 |
Complete |
ASTM |
F1926/F1926M-14 |
Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings |
| 12/21/2020 |
Materials |
8-546 |
Complete |
ASTM |
F3044-20 |
Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| 12/22/2025 |
Materials |
8-629 |
Complete |
ASTM |
F67-24 |
Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| 12/22/2025 |
Materials |
8-630 |
Complete |
ASTM |
F90-24 |
Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| 06/07/2021 |
Materials |
8-558 |
Complete |
ASTM |
F3333-20 |
Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 06/07/2021 |
Materials |
8-562 |
Complete |
ISO ASTM |
52904 First edition 2019-08 |
Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications |
| 05/25/2026 |
Materials |
8-650 |
Complete |
ASTM |
F3766-25 |
Standard Guide for Content and Format of Test Report Summaries for Medical and Surgical Materials and Device Standards |
| 12/23/2019 |
Materials |
8-507 |
Complete |
ASTM |
F688-19 |
Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| 12/22/2025 |
Materials |
8-639 |
Complete |
ASTM |
F1091-25 |
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) |
| 12/21/2020 |
Materials |
8-541 |
Complete |
ASTM |
F1537-20 |
Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| 08/21/2017 |
Materials |
8-428 |
Complete |
ASTM |
F1581-08 (Reapproved 2020) |
Standard Specification for Composition of Anorganic Bone for Surgical Implants |
| 08/21/2017 |
Materials |
8-455 |
Complete |
ASTM |
F2902-16 |
Standard Guide for Assessment of Absorbable Polymeric Implants |
| 12/23/2019 |
Materials |
8-508 |
Complete |
ASTM |
F2579-18 |
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants |
| 12/23/2019 |
Materials |
8-484 |
Complete |
ASTM |
F2066-18 |
Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| 12/22/2025 |
Materials |
8-634 |
Complete |
ASTM |
F2066-23 |
Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| 06/07/2018 |
Materials |
8-356 |
Complete |
ASTM |
F67-13 (Reapproved 2017) |
Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| 04/04/2016 |
Materials |
8-415 |
Complete |
ASTM |
F2778-09 (Reapproved 2020) |
Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR) |
| 05/25/2026 |
Materials |
8-649 |
Complete |
ASTM |
F2503-26 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 09/17/2018 |
Materials |
8-380 |
Complete |
ASTM |
F1160-14 (Reapproved 2017)e1 |
Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| 09/17/2018 |
Materials |
8-470 |
Complete |
ASTM |
F2102-17 |
Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants |
| 06/07/2018 |
Materials |
8-113 |
Complete |
ASTM |
F1147-05 (Reapproved 2017)e1 |
Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| 06/07/2018 |
Materials |
8-463 |
Complete |
ISO ASTM |
52901 First edition 2017-08 |
Standard Guide for Additive Manufacturing - General Principles - Requirements for Purchased AM Parts |
| 12/21/2020 |
Materials |
8-538 |
Complete |
ASTM |
F2759-19 |
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
| 12/23/2024 |
Materials |
8-625 |
Complete |
ASTM |
F1295-24 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 09/17/2018 |
Materials |
8-474 |
Complete |
ASTM |
F2886-17 |
Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| 07/15/2019 |
Materials |
8-514 |
Complete |
ISO |
5834-2 Fifth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms |
| 09/17/2018 |
Materials |
8-465 |
Complete |
ISO |
5832-2 Fourth edition 2018-03 |
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium |
| 04/04/2016 |
Materials |
8-116 |
Complete |
ASTM |
F2258-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| 07/15/2019 |
Materials |
8-496 |
Complete |
ISO |
5834-4 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method |
| 07/15/2019 |
Materials |
8-497 |
Complete |
ISO |
5834-5 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5: Morphology assessment method |
| 08/21/2017 |
Materials |
8-452 |
Complete |
ASTM |
F1635-16 |
Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| 12/23/2019 |
Materials |
8-523 |
Complete |
ASTM |
F3275-19 |
Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device |
| 12/23/2019 |
Materials |
8-524 |
Complete |
ASTM |
F3276-19 |
Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device |
| 12/21/2020 |
Materials |
8-551 |
Complete |
ASTM |
F2895-20 |
Standard Practice for Digital Radiography of Cast Metallic Implants |
| 12/22/2025 |
Materials |
8-643 |
Complete |
ASTM |
F2820-24 |
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
| 12/21/2020 |
Materials |
8-548 |
Complete |
ISO ASTM |
52915 Third edition 2020-03 |
Specification for additive manufacturing file format (AMF) Version 1.2 |
| 07/06/2020 |
Materials |
8-526 |
Complete |
ASTM |
F2182-19e2 |
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance |
| 05/29/2023 |
Materials |
8-602 |
Complete |
ASTM |
F2503-23 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 06/27/2016 |
Materials |
8-431 |
Complete |
ASTM |
F2971-13 |
Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
| 12/21/2020 |
Materials |
8-550 |
Complete |
ASTM |
F2181-20 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| 12/21/2020 |
Materials |
8-553 |
Complete |
ISO ASTM |
52903-1 First edition 2020-04 |
Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials |
| 12/23/2019 |
Materials |
8-480 |
Complete |
ASTM |
F2063-18 |
Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| 06/07/2021 |
Materials |
8-560 |
Complete |
ASTM |
D1415-18 |
Standard Test Method for Rubber Property - International Hardness |
| 12/21/2020 |
Materials |
8-554 |
Complete |
ISO ASTM |
TR 52912 First edition 2020-09 |
Additive manufacturing - Design - Functionally graded additive manufacturing |
| 12/21/2020 |
Materials |
8-537 |
Complete |
ASTM |
F620-20 |
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| 12/22/2025 |
Materials |
8-631 |
Complete |
ASTM |
F1854-25 |
Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants Using Digital Images |
| 04/04/2016 |
Materials |
8-400 |
Complete |
ASTM |
F1854-15 |
Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants |
| 06/07/2021 |
Materials |
8-557 |
Complete |
ASTM |
F3268-18a |
Standard Guide for in vitro Degradation Testing of Absorbable Metals |
| 07/15/2019 |
Materials |
8-510 |
Complete |
ASTM |
F997-18 |
Standard Specification for Polycarbonate Resin for Medical Applications |
| 12/23/2019 |
Materials |
8-502 |
Complete |
ASTM |
F2038-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
| 12/23/2019 |
Materials |
8-492 |
Complete |
ISO |
5832-9 Third edition 2019-02 |
Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel |
| 12/23/2019 |
Materials |
8-494 |
Complete |
ISO |
6474-1 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina |
| 12/23/2019 |
Materials |
8-499 |
Complete |
ASTM |
F1580-18 |
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| 12/23/2019 |
Materials |
8-500 |
Complete |
ISO |
5832-12 Third edition 2019-02 |
Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
| 04/04/2016 |
Materials |
8-403 |
Complete |
ASTM |
D638-14 |
Standard Test Method for Tensile Properties of Plastics |
| 12/23/2019 |
Materials |
8-505 |
Complete |
ISO |
6474-2 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| 12/22/2025 |
Materials |
8-637 |
Complete |
ASTM |
F2579-24 |
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants |
| 07/15/2019 |
Materials |
8-517 |
Complete |
ISO |
17327-1 First edition 2018-02 |
Non-active surgical implants - Implant coating - Part 1: General requirements |
| 12/22/2025 |
Materials |
8-638 |
Complete |
ASTM |
F2313-24 |
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide |
| 12/20/2021 |
Materials |
8-578 |
Complete |
ASTM |
F2848-21 |
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
| 12/22/2025 |
Materials |
8-646 |
Complete |
ASTM |
F624-25 |
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Medical Applications |
| 05/25/2026 |
Materials |
8-647 |
Complete |
ASTM |
F3260-25 |
Standard Test Method for Determining the Flexural Stiffness of Medical Textiles |
| 12/23/2019 |
Materials |
8-521 |
Complete |
ASTM |
F2313-18 |
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide |
| 12/19/2022 |
Materials |
8-596 |
Complete |
ASTM |
D412-16(2021) |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension |
| 12/20/2021 |
Materials |
8-576 |
Complete |
ASTM |
F451-21 |
Standard Specification for Acrylic Bone Cement |
| 12/22/2025 |
Materials |
8-635 |
Complete |
ASTM |
F75-23 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| 12/23/2019 |
Materials |
8-498 |
Complete |
ASTM |
F75-18 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| 12/22/2025 |
Materials |
8-645 |
Complete |
ASTM |
F1925-24 |
Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
| 07/15/2019 |
Materials |
8-516 |
Complete |
ISO |
13779-4 Second edition 2018-12 |
Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength |
| 12/21/2020 |
Materials |
8-540 |
Complete |
ASTM |
F1091-20 |
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) |
| 12/21/2020 |
Materials |
8-552 |
Complete |
ASTM |
F3434-20 |
Guide for Additive manufacturing - Installation/Operation and Performance Qualification (IQ/OQ/PQ) of Laser-Beam Powder Bed Fusion Equipment for Production Manufacturing |
| 04/04/2016 |
Materials |
8-413 |
Complete |
ASTM |
F2819-10 (Reapproved 2015) |
Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices |
| 07/06/2020 |
Materials |
8-529 |
Complete |
ASTM |
F2633-19 |
Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| 06/27/2016 |
Materials |
8-429 |
Complete |
ASTM |
F2224-09 (Reapproved 2020) |
Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
| 12/23/2019 |
Materials |
8-519 |
Complete |
ISO |
13782 Second edition 2019-04 |
Implants for surgery - Metallic materials - Unalloyed tantalum for surgical implant applications |
| 07/06/2020 |
Materials |
8-534 |
Complete |
ISO ASTM |
52911-1: First Edition 2019-07 |
Additive Manufacturing - Design - Part 1: Laser-based powder bed fusion of metals |
| 07/06/2020 |
Materials |
8-535 |
Complete |
ISO ASTM |
52911-2: First Edition 2019-09 |
Additive Manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers |
| 07/15/2019 |
Materials |
8-493 |
Complete |
ISO |
13779-2 Third edition 2018-12 |
Implants for surgery - Hydroxyapatite - Part 2: Thermally sprayed coatings of hydroxyapatite |
| 07/15/2019 |
Materials |
8-503 |
Complete |
ASTM |
F2042-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications - Part II - Crosslinking and Fabrication |
| 07/06/2020 |
Materials |
8-533 |
Complete |
ISO ASTM |
52907: First Edition 2019-11 |
Additive Manufacturing - Feedstock materials - Methods to characterize metal powders |
| 07/06/2020 |
Materials |
8-531 |
Complete |
ASTM |
F3321-19 |
Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices |
| 08/21/2017 |
Materials |
8-458 |
Complete |
ASTM |
G5-14 |
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| 06/27/2016 |
Materials |
8-427 |
Complete |
ASTM |
F1185-03 (Reapproved 2014) |
Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
| 07/06/2020 |
Materials |
8-536 |
Complete |
ISO ASTM |
52902:First Edition 2019-07 |
Additive Manufacturing -Test Artifacts - Geometric capability assessment of additive manufacturing systems |
| 01/30/2014 |
Materials |
8-157 |
Complete |
ISO |
9583 First edition 1993-10-15 |
Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants |
| 04/04/2016 |
Materials |
8-107 |
Complete |
ASTM |
F746-04 (Reapproved 2014) |
Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| 12/23/2019 |
Materials |
8-522 |
Complete |
ASTM |
F2129-19a |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| 04/04/2016 |
Materials |
8-401 |
Complete |
ASTM |
F2118-14 (Reapproved 2020) |
Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
| 12/23/2016 |
Materials |
8-368 |
Complete |
ASTM |
F2625-10 (Reapproved 2016) |
Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry |
| 04/04/2016 |
Materials |
8-115 |
Complete |
ASTM |
F2256-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
| 04/04/2016 |
Materials |
8-136 |
Complete |
ASTM |
F2458-05 (Reapproved 2015) |
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
| 08/06/2013 |
Materials |
8-153 |
Complete |
ASTM |
F2119-07 (Reapproved 2013) |
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants |
| 08/06/2013 |
Materials |
8-158 |
Complete |
ASTM |
F1713-08 (Reapproved 2013) |
Standard Specification for Wrought Titanium-13 Niobium-13 Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| 05/29/2023 |
Materials |
8-599 |
Complete |
ASTM |
F1295-22 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 08/21/2017 |
Materials |
8-195 |
Complete |
ASTM |
F2024-10 (Reapproved 2016) |
Standard Practice for X-Ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings |
| 05/29/2024 |
Materials |
8-611 |
Complete |
ISO |
9584 Second edition 2023-10 |
Implants for surgery - Non-destructive testing - Radiographic examination of cast metallic surgical implants |
| 05/29/2024 |
Materials |
8-612 |
Complete |
ASTM |
F899-23 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| 09/17/2018 |
Materials |
8-478 |
Complete |
ASTM |
F1089-18 |
Standard Test Method for Corrosion of Surgical Instruments |
| 04/04/2016 |
Materials |
8-404 |
Complete |
ASTM |
E647-15 |
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
| 06/27/2016 |
Materials |
8-426 |
Complete |
ASTM |
F3087-15 (2024) |
Standard Specification for Acrylic Molding Resins for Medical Implant Applications |
| 06/27/2016 |
Materials |
8-430 |
Complete |
ISO |
13356:2015 Third Edition 2015-09-15 |
Implants for surgery -- Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| 06/27/2016 |
Materials |
8-432 |
Complete |
ISO ASTM |
52921 First Edition 2013-06-01 |
Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies. |
| 07/15/2019 |
Materials |
8-504 |
Complete |
ASTM |
F561-19 |
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| 09/17/2018 |
Materials |
8-479 |
Complete |
ISO |
13781 Second edition 2017-07 |
Implants for surgery - Homopolymers, copolymers and blends on poly(lactide) - In vitro degradation testing |
| 01/14/2019 |
Materials |
8-488 |
Complete |
ASTM |
F3301-18a |
Standard for Additive Manufacturing - Post Processing Methods - Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion |
| 12/23/2019 |
Materials |
8-501 |
Complete |
ISO |
5834-1 Fourth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form |
| 12/23/2024 |
Materials |
8-619 |
Complete |
ISO |
5832-4 Fourth edition 2024-04 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
| 12/23/2024 |
Materials |
8-620 |
Complete |
ISO |
5832-11 Third edition 2024-03 |
Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 05/30/2022 |
Materials |
8-590 |
Complete |
ISO |
TS 17137 Third edition 2021-09 |
Cardiovascular implants and extracorporeal systems - Cardiovascular absorbable implants |
| 12/23/2024 |
Materials |
8-626 |
Complete |
ASTM |
E2948-24 |
Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire |
| 12/23/2024 |
Materials |
8-627 |
Complete |
ASTM |
F3604-23 |
Standard Practice for Validating the Additive Manufacturing (AM) Production Process for Medical Devices Produced Using Laser Powder Bed Fusion. |
| 01/14/2019 |
Materials |
8-489 |
Complete |
ASTM |
F3302-18 |
Standard for Additive Manufacturing - Finished Part Properties - Standard Specification for Titanium Alloys via Powder Bed Fusion |
| 06/27/2016 |
Materials |
8-434 |
Complete |
ISO ASTM |
52900 First Edition 2015-12-15 |
Additive manufacturing -- General principles - Terminology |
| 12/22/2025 |
Materials |
8-636 |
Complete |
ASTM |
F688-25 |
Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| 07/15/2019 |
Materials |
8-518 |
Complete |
ASTM |
F3306-19 |
Standard Test Method for Ion Release Evaluation of Medical Implants |
| 12/23/2024 |
Materials |
8-623 |
Complete |
ASTM |
F1314-24 |
Standard Specification for Wrought Nitrogen Strengthened 22Chromium-13Nickel-5Manganese-2.5Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| 12/23/2019 |
Materials |
8-481 |
Complete |
ASTM |
F1314-18 |
Standard Specification for Wrought Nitrogen Strengthened 22Chromium-13Nickel-5Manganese-2.5Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| 06/07/2018 |
Materials |
8-337 |
Complete |
ASTM |
F621-12 (Reapproved 2017) |
Standard Specification for Stainless Steel Forgings for Surgical Implants |
| 04/04/2016 |
Materials |
8-399 |
Complete |
ASTM |
F90-14 |
Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| 08/21/2017 |
Materials |
8-459 |
Complete |
SAE |
AMS2750 Rev. E 2012-07 |
Pyrometry |
| 12/20/2021 |
Materials |
8-569 |
Complete |
ASTM |
F648-21 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
| 07/06/2020 |
Materials |
8-532 |
Complete |
ASTM |
F3335-20 |
Standard Guide for Assessing the Removal of Additive Manufacturing Residues in Medical Devices Fabricated by Powder Bed Fusion |
| 09/17/2018 |
Materials |
8-472 |
Complete |
ASTM |
F2847-17 |
Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments |
| 08/21/2017 |
Materials |
8-333 |
Complete |
ASTM |
F2393-12 (Reapproved 2020) |
Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications |
| 12/23/2016 |
Materials |
8-440 |
Complete |
ASTM |
F3091/F3091M-14 |
Standard Specification for Powder Bed Fusion of Plastic Materials |
| 08/21/2017 |
Materials |
8-226 |
Complete |
ASTM |
F603-12 (Reapproved 2020) |
Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application |
| 07/09/2014 |
Materials |
8-377 |
Complete |
ASTM |
F136-13 |
Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| 12/22/2025 |
Materials |
8-640 |
Complete |
ASTM |
F961-25 |
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| 12/21/2020 |
Materials |
8-544 |
Complete |
ASTM |
F961-20 |
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| 01/30/2014 |
Materials |
8-358 |
Complete |
ASTM |
F1855-00 (Reapproved 2019) |
Standard Specification for Polyoxymethylene (Acetal) for Medical Applications |
| 07/09/2014 |
Materials |
8-378 |
Complete |
ASTM |
D792-13 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| 07/15/2019 |
Materials |
8-513 |
Complete |
ISO |
20160 First edition 2006-05-01 |
Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars |
| 07/15/2019 |
Materials |
8-509 |
Complete |
ASTM |
F702-18 |
Standard Specification for Polysulfone Resin for Medical Applications |
| 12/21/2020 |
Materials |
8-542 |
Complete |
ASTM |
F138-19 |
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
| 12/21/2020 |
Materials |
8-543 |
Partial |
ASTM |
F755-19 |
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
| 01/14/2019 |
Materials |
8-179 |
Partial |
ASTM |
F754-08 (Reapproved 2015) |
Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders |
| 04/04/2016 |
Materials |
8-409 |
Partial |
ASTM |
F2924-14 |
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| 12/23/2016 |
Materials |
8-439 |
Partial |
ASTM |
F3001-14 |
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| 05/29/2024 |
Materials |
8-613 |
Complete |
ASTM |
F2527-24 |
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants |
| 12/18/2023 |
Materials |
8-610 |
Complete |
ASTM |
F601-23 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 01/14/2019 |
Materials |
8-483 |
Complete |
ASTM |
F601-18 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 06/07/2021 |
Materials |
8-556 |
Complete |
ASTM |
F640-20 |
Standard Test Methods for Determining Radiopacity for Medical Use |
| 08/21/2017 |
Materials |
8-451 |
Complete |
ASTM |
F2214-16 |
Standard Test Methods for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 09/17/2018 |
Materials |
8-473 |
Partial |
ASTM |
F2885-17 |
Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| 07/15/2019 |
Nanotechnology |
18-13 |
Partial |
ISO |
TS 18827 First edition 2017-06 |
Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials |
| 12/18/2023 |
Nanotechnology |
18-24 |
Partial |
ASTM |
E2524-22 |
Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles |
| 01/27/2015 |
Nanotechnology |
18-3 |
Partial |
ISO |
TS 14101 First edition 2012-11-01 |
Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method |
| 01/14/2019 |
Nanotechnology |
18-2 |
Partial |
ASTM |
E2535-07 (Reapproved 2018) |
Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings |
| 07/15/2019 |
Nanotechnology |
18-14 |
Partial |
ISO |
TR 11360 First edition 2010-07-15 |
Nanotechnologies - Methodology for the classification and categorization of nanomaterials |
| 01/14/2019 |
Nanotechnology |
18-11 |
Complete |
ISO |
TR 13121 First edition 2011-05-15 |
Nanotechnologies - Nanomaterial risk evaluation |
| 01/14/2019 |
Nanotechnology |
18-6 |
Complete |
ASTM |
E2865-12 (Reapproved 2022) |
Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials |
| 01/14/2019 |
Nanotechnology |
18-8 |
Complete |
ASTM |
E2578-07 (Reapproved 2022) |
Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions |
| 06/07/2018 |
Nanotechnology |
18-10 |
Complete |
ISO |
29701 First edition 2010-09-15 |
Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test. |
| 01/14/2019 |
Nanotechnology |
18-7 |
Complete |
ASTM |
E2834-12 (Reapproved 2022) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA) |
| 12/21/2020 |
Nanotechnology |
18-18 |
Complete |
ASTM |
E3247-20 |
Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering |
| 05/25/2026 |
Nanotechnology |
18-25 |
Complete |
ISO |
21362 First edition 2026-02 |
Nanotechnologies -- Analysis of nano-objects using asymmetrical flow and centrifugal field-flow fractionation |
| 07/06/2020 |
Nanotechnology |
18-16 |
Complete |
ISO |
TS 21362 First edition 2018-06 |
Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation |
| 12/21/2020 |
Nanotechnology |
18-17 |
Complete |
ISO |
21363 First edition 2020-06 |
Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy |
| 12/20/2021 |
Nanotechnology |
18-19 |
Complete |
ISO |
19749 First edition 2021-07 |
Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy |
| 12/20/2021 |
Nanotechnology |
18-20 |
Complete |
ASTM |
E3275-21 |
Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis |
| 01/14/2019 |
Nanotechnology |
18-5 |
Complete |
ASTM |
E2859-11 (Reapproved 2017) |
Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
| 06/07/2018 |
Nanotechnology |
18-9 |
Complete |
ISO |
TR 13014 First edition 2012-05-15 |
Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment [Including CORRIGENDUM 1 (2012)]. |
| 05/29/2023 |
Nanotechnology |
18-23 |
Complete |
ASTM |
E3025-22 |
Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
| 04/04/2016 |
Nanotechnology |
18-1 |
Complete |
ASTM |
E2490-09 (Reapproved 2021) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
| 12/19/2022 |
Nanotechnology |
18-21 |
Complete |
ISO |
TS 80004-6 Second edition 2021-03 |
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
