|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 12/20/2021 |
InVitro Diagnostics |
7-310 |
Complete |
ISO |
19238 Second edition 2014-02-01 |
Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
| 12/20/2021 |
InVitro Diagnostics |
7-311 |
Complete |
CLSI |
EP39, 1st Edition |
A Hierarchical Approach to Selecting Surrogate Samples for the Evaluation of In Vitro Medical Laboratory Tests |
| 12/20/2021 |
Physical Medicine |
16-232 |
Complete |
IEC |
80601-2-78 Edition 1.0 2019-07 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation |
| 05/26/2025 |
Radiology |
12-382 |
Complete |
NEMA |
NU 2-2024 |
Performance Measurements of Positron Emission Tomographs |
| 12/22/2025 |
Anesthesiology |
1-198 |
Complete |
ISO |
7376 Third edition 2020-08 [Including AMD1:2025] |
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation - Amendment 1: Clarification of optical output and illumination requirements [Including Amendment 1 (2025)] |
| 12/21/2020 |
Anesthesiology |
1-149 |
Complete |
ISO |
7376 Third edition 2020-08 |
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation |
| 09/17/2018 |
Orthopedic |
11-324 |
Complete |
ASTM |
F366-17 |
Standard Specification for Fixation Pins and Wires |
| 01/30/2014 |
Sterility |
14-429 |
Complete |
ISO ASTM |
51275 Third edition 2013-06-01 |
Practice for use of a radiochromic film dosimetry system |
| 05/30/2022 |
Materials |
8-592 |
Complete |
ASTM |
F3384-21 |
Standard Specification for Polydioxanone Polymer Resins for Surgical Implants |
| 12/23/2024 |
Sterility |
14-609 |
Complete |
AAMI |
TIR17:2024 |
Compatibility of materials subjected to sterilization |
| 03/18/2009 |
InVitro Diagnostics |
7-189 |
Complete |
CLSI |
M47-A (Replaces M47-P) |
Principles and Procedures for Blood Cultures; Approved Guideline |
| 05/26/2025 |
Radiology |
12-383 |
Complete |
NEMA |
NU 1-2023 |
Performance Measurements of Gamma Cameras |
| 09/11/2023 |
Orthopedic |
11-400 |
Complete |
ISO |
21536 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants |
| 05/29/2023 |
Sterility |
14-585 |
Complete |
AAMI ISO |
TIR16775:2023 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| ISO |
TS 16775 Second edition 2021-11 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| 05/26/2025 |
Radiology |
12-381 |
Complete |
IEC |
60601-2-68 Edition 2.0 2025-02 |
Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment |
| 09/17/2018 |
Radiology |
12-319 |
Complete |
IEC |
60601-2-68 Edition 1.0 2014-09 |
Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment |
| 12/23/2024 |
InVitro Diagnostics |
7-322 |
Complete |
CLSI |
M47 2nd Edition |
Principles and Procedures for Blood Cultures |
| 07/15/2019 |
Radiology |
12-326 |
Complete |
NEMA |
NU 2-2018 |
Performance Measurements of Positron Emission Tomographs |
| 12/22/2025 |
Biocompatibility |
2-310 |
Complete |
ASTM |
F748-25 |
Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices |
| 08/14/2015 |
Anesthesiology |
1-105 |
Complete |
ISO |
80601-2-72 First edition 2015-04-11 |
Medical electrical equipment - Part 2-72: Particular requirements for basic safely and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 12/18/2023 |
Anesthesiology |
1-162 |
Complete |
ISO |
10651-4 Second edition 2023-03 |
Lung ventilators - Part 4: Particular requirements for user-powered resuscitators |
| 12/23/2019 |
General II (ES/
EMC) |
19-33 |
Complete |
IEC |
62133-2 Edition1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems |
| 05/26/2025 |
General II (ES/
EMC) |
19-56 |
Complete |
IEC |
60086-4 Edition 6.0 2025-01 |
Primary batteries - Part 4: Safety of lithium batteries |
| 06/07/2021 |
General II (ES/
EMC) |
19-40 |
Complete |
IEC |
60086-4 Edition 5.0 2019-04 |
Primary batteries - Part 4: Safety of lithium batteries [Including: Corrigendum 1 (2019) and Corrigendum 2 (2020)] |
| 12/20/2021 |
Orthopedic |
11-389 |
Complete |
ISO |
7206-10 Second edition 2018-08 |
Implants for surgery - Partial and total hip-joint prostheses - Part 10: Determination of resistance to static load of modular femoral heads [Including AMENDMENT 1 (2021)] |
| 05/29/2023 |
Materials |
8-597 |
Complete |
ASTM |
F2003-02(2022) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
| 01/14/2019 |
Materials |
8-482 |
Complete |
ASTM |
D1505-18 |
Standard Test Method for Density of Plastics by the Density-Gradient Technique |
| 12/22/2025 |
Biocompatibility |
2-309 |
Complete |
ASTM |
F895-25 |
Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity |
| 12/23/2016 |
Biocompatibility |
2-189 |
Complete |
ASTM |
F895-11 (Reapproved 2016) |
Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity |
| 04/04/2016 |
Materials |
8-200 |
Complete |
ASTM |
F2003-02 (Reapproved 2015) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
| 12/23/2016 |
Materials |
8-441 |
Complete |
ASTM |
F3109-16 |
Standard Test Method for Verification of Multi-Axis Force Measuring Platforms |
| 07/28/2025 |
General II (ES/
EMC) |
19-57 |
Complete |
IEC |
61326-2-6 Edition 4.0 2025-06 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| 12/22/2025 |
Orthopedic |
11-434 |
Complete |
ASTM |
F3018-25 |
Standard Guide for Assessment of Hard-on-Hard Articulation in Total Hip Joint Replacement and Resurfacing Hip Joint Replacement |
| 12/19/2022 |
Orthopedic |
11-397 |
Complete |
ASTM |
F3210-22e1 |
Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions |
| 12/20/2021 |
Dental/
ENT |
4-286 |
Complete |
ANSI ADA |
Standard No. 87-1995 (R2014) |
Dental Impression Trays |
| 12/19/2022 |
Sterility |
14-581 |
Complete |
ASTM |
F2638-22 |
Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier |
| 12/19/2022 |
Sterility |
14-582 |
Complete |
AAMI ISO |
TIR11137-4:2022 |
Sterilization of health care products - Radiation - Part 4: Guidance on process control |
| ISO |
TS 11137-4 First edition 2020-06 |
Sterilization of health care products - Radiation - Part 4: Guidance on process control |
| 12/19/2022 |
Sterility |
14-583 |
Complete |
ANSI AAMI |
ST98:2022 |
Cleaning validation of health care products - Requirements for development and validation of a cleaning process for medical devices |
| 12/19/2022 |
Software/
Informatics |
13-125 |
Complete |
ANSI AAMI UL |
2800-1-1:2022 |
Standard for Risk Concerns for Interoperable Medical Products |
| 06/07/2018 |
ObGyn/
Gastroenterology/
Urology |
9-114 |
Complete |
IEC |
60601-2-18: Edition 3.0 2009-08 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment |
| 06/07/2021 |
Dental/
ENT |
4-273 |
Complete |
ANSI ASA |
S3.7-2016 (Reaffirmed 2025) |
American National Standard Method for Coupler Calibration of Earphones |
| 01/14/2019 |
Cardiovascular |
3-44 |
Complete |
ANSI AAMI |
BP22:1994 (R2016) |
Blood pressure transducers |
| 12/21/2020 |
Materials |
8-548 |
Complete |
ISO ASTM |
52915 Third edition 2020-03 |
Specification for additive manufacturing file format (AMF) Version 1.2 |
| 07/06/2020 |
Materials |
8-526 |
Complete |
ASTM |
F2182-19e2 |
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance |
| 12/20/2021 |
Sterility |
14-563 |
Complete |
ISO |
13408-6 Second edition 2021-04 |
Aseptic processing of health care products - Part 6: Isolator systems |
| 12/20/2021 |
Radiology |
12-341 |
Complete |
IEC |
62563-1 Edition 1.2 2021-07 CONSOLIDATED VERSION |
Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods |
| 12/19/2022 |
Software/
Informatics |
13-126 |
Complete |
ANSI AAMI UL |
2800-1-2:2022 |
Standard for Interoperable Item Development Life Cycle |
| 12/19/2022 |
Software/
Informatics |
13-127 |
Complete |
ANSI AAMI UL |
2800-1-3:2022 |
Standard for Interoperable Item Integration Life Cycle |
| 12/19/2022 |
Software/
Informatics |
13-121 |
Complete |
ANSI AAMI UL |
2800-1:2022 |
Standard for Medical Device Interoperability |
| 12/19/2022 |
General I (QS/
RM) |
5-135 |
Complete |
ISO |
20417 First edition 2021-04 Corrected version 2021-12 |
Medical devices - Information to be supplied by the manufacturer |
| 12/19/2022 |
General I (QS/
RM) |
5-138 |
Complete |
AAMI |
TIR66: 2017/(R)2025 |
Guidance for the creation of physiologic data and waveform databases to demonstrate reasonable assurance of the safety and effectiveness of alarm system algorithms |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-481 |
Complete |
ANSI AAMI |
CN27:2021 |
General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications |
| 07/06/2020 |
General I (QS/
RM) |
5-130 |
Complete |
ISO |
7010 Third edition 2019-07 |
Graphical symbols - Safety colours and safety signs - Registered safety signs |
| 07/06/2020 |
Radiology |
12-333 |
Complete |
IEC |
TR 63183 Edition 1.0 2019-12 |
Guidance on error and warning messages for software used in radiotherapy |
| 06/07/2021 |
Dental/
ENT |
4-278 |
Complete |
ISO |
4823 Fifth edition 2021-02 |
Dentistry - Elastomeric impression and bite registration materials |
| ANSI ADA |
Standard No. 19-2022 |
Elastomeric Impression and Bite Registration |
| 07/15/2019 |
Materials |
8-495 |
Complete |
ISO |
5834-3 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3: Accelerated ageing methods |
| 06/07/2021 |
Dental/
ENT |
4-279 |
Complete |
ANSI ADA |
Standard No. 85-2004 (R2009) |
Part 1: Disposable Prophy Angles |
| 06/07/2021 |
Dental/
ENT |
4-283 |
Complete |
ISO |
16409 Second edition 2016-10 |
Dentistry - Oral care products - Manual interdental brushes |
| ANSI ADA |
Standard No. 125-2018 |
Manual Interdental Brushes |
| 12/21/2020 |
Dental/
ENT |
4-269 |
Complete |
ISO |
3964 Third edition 11-2016 |
Dentistry - Coupling dimensions for handpiece connectors [Including AMENDMENT 1 (2018)] |
| ANSI ADA |
Standard No. 158-2020 |
Coupling Dimensions for Dental Handpiece Connectors |
| 12/23/2019 |
Physical Medicine |
16-207 |
Complete |
RESNA ANSI |
WC-1:2019 Section 1 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 1: Determination of static stability |
| 12/23/2019 |
Physical Medicine |
16-209 |
Complete |
RESNA ANSI |
WC-1:2019 Section 3 |
American National Standard for Wheelchairs - Volume 1: Additional Requirements for Wheelchairs (including Scooters) Section 3: Determination of effectiveness of brakes |
| 12/23/2019 |
Physical Medicine |
16-210 |
Complete |
RESNA ANSI |
WC-2:2019 Section 4 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 4: Energy consumption of electrically powered wheelchairs and scooters for determination of theoretical distance range |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-482 |
Complete |
AAMI |
TIR101:2021 |
Fluid delivery performance testing for infusion pumps |
| 05/29/2023 |
Dental/
ENT |
4-301 |
Complete |
ISO |
21563 Second edition 2021-08 |
Dentistry - Hydrocolloid impression materials |
| ANSI ADA |
Standard No. 128-2022 |
Hydrocolloid Impression Materials |
| 05/29/2023 |
Dental/
ENT |
4-302 |
Complete |
ISO |
10477 Fourth edition 2020-10 |
Dentistry - Polymer-based crown and veneering materials |
| ANSI ADA |
Standard No. 53-2022 |
Polymer-Based Crown and Veneering Materials |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-122 |
Complete |
ISO |
25841 Third edition 2017-08 |
Female condoms -- Requirements and test methods |
| 06/07/2021 |
Materials |
8-556 |
Complete |
ASTM |
F640-20 |
Standard Test Methods for Determining Radiopacity for Medical Use |
| 06/07/2021 |
Materials |
8-561 |
Complete |
ISO ASTM |
52950 First edition 2021-01 |
Additive manufacturing - General principles - Overview of data processing |
| 08/06/2013 |
Ophthalmic |
10-77 |
Complete |
ISO |
9394 Third edition 2012-10-01 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes |
| 06/07/2021 |
Radiology |
12-340 |
Complete |
IEC |
60601-2-65 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral-X-ray equipment |
| 08/06/2013 |
Radiology |
12-205 |
Complete |
IEC |
60601-2-5: Edition 3.0 2009-07 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-476 |
Complete |
ISO |
11608-2:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles |
| 05/30/2022 |
General II (ES/
EMC) |
19-47 |
Complete |
ANSI AAMI |
HA60601-1-11:2015 [Including AMD1:2021] |
Medical Electrical Equipment -- Part 1-11: General requirements for basic safety and essential performance -- Collateral Standard: Requirements for medical electrical equipment and medical electrical equipment and medical electrical systems used in the home healthcare environment (IEC 60601-1-11:2015 MOD) [Including Amendment1 (2021)] |
| 01/14/2019 |
Materials |
8-485 |
Complete |
ASTM |
F3260-18 |
Standard Test Method for Determining the Flexural Stiffness of Medical Textiles |
| 05/30/2022 |
General II (ES/
EMC) |
19-46 |
Complete |
ANSI AAMI |
ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD) [Including Amendment 2 (2021)] |
| 05/30/2022 |
Radiology |
12-344 |
Complete |
IEC |
62563-2 Edition 1.0 2021-11 |
Medical electrical equipment - Medical image display systems - Part 2: Acceptance and constancy tests for medical image displays |
| 12/20/2021 |
Cardiovascular |
3-171 |
Complete |
ASTM |
F2514-21 |
Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading |
| 12/20/2021 |
Cardiovascular |
3-172 |
Complete |
AAMI |
TIR42:2021 |
Evaluation of Particulates Associated with Vascular Medical Devices |
| 08/21/2017 |
Software/
Informatics |
13-67 |
Complete |
ISO IEEE |
11073-10418 First edition 2014-03-01 |
Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor [including TECHNICAL CORRIGENDUM 1 (2016)] |
| IEEE |
Std 11073-10418-2011 |
Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor |
| 12/23/2019 |
Materials |
8-501 |
Complete |
ISO |
5834-1 Fourth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form |
| 12/23/2019 |
Materials |
8-502 |
Complete |
ASTM |
F2038-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
| 07/06/2020 |
Biocompatibility |
2-274 |
Complete |
ASTM |
F749-20 |
Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit |
| 04/04/2016 |
General I (QS/
RM) |
5-98 |
Complete |
ANSI ESD |
S20.20-2014 |
Standard for the Development of an Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) |
| 12/21/2020 |
Materials |
8-549 |
Complete |
ASTM |
F3208-20 |
Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
| 07/15/2019 |
Sterility |
14-532 |
Complete |
ASTM |
F3287-17e1 |
Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-147 |
Complete |
ASTM |
D6978-05(2023) |
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
| 12/23/2019 |
Physical Medicine |
16-216 |
Complete |
RESNA ANSI |
WC-2:2019 Section 10 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 10: Determination of obstacle-climbing ability of electrically powered wheelchairs |
| 12/23/2019 |
Physical Medicine |
16-217 |
Complete |
RESNA ANSI |
WC-1:2019 Section 11 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 11: Test mannequins |
| 12/21/2020 |
Orthopedic |
11-375 |
Complete |
ASTM |
F2193-20 |
Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
| 12/19/2022 |
Software/
Informatics |
13-128 |
Complete |
IEEE UL |
Std 2621.2-2022 |
Standard for Wireless Diabetes Device Security: Information Security Requirements for Connected Diabetes Solutions |
| 01/27/2015 |
Orthopedic |
11-283 |
Complete |
ASTM |
F2943-14 (Reapproved 2019) |
Standard Guide for Presentation of End User Labeling Information for Orthopedic Implants Used in Joint Arthroplasty |
| 12/22/2025 |
Orthopedic |
11-427 |
Complete |
ASTM |
F1264-24 |
Standard Specification and Test Methods for Intramedullary Fixation Devices |
| 05/26/2025 |
General II (ES/
EMC) |
19-55 |
Complete |
IEC |
62133-2 Edition 1.1 2021-07 CONSOLIDATED VERSION |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems |
| 12/20/2021 |
Materials |
8-563 |
Complete |
ASTM |
F1801-20 |
Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
| 12/23/2019 |
Anesthesiology |
1-145 |
Complete |
ISO |
19223 First edition 2019-07 |
Lung ventilators and related equipment - Vocabulary and semantics. |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-437 |
Complete |
ISO |
23907-2 First edition 2019-11 |
Sharps injury protection - Requirements and test methods - Part 2: Reusable sharps containers. |
| 05/30/2022 |
Materials |
8-590 |
Complete |
ISO |
TS 17137 Third edition 2021-09 |
Cardiovascular implants and extracorporeal systems - Cardiovascular absorbable implants |
| 12/22/2025 |
Dental/
ENT |
4-362 |
Complete |
ISO |
3630-3 Third edition 2021-06 Corrected version 2023-05 |
Dentistry - Endodontic instruments - Part 3: Compactors |
| ANSI ADA |
Standard No. 71-2022 |
Dentistry - Endodontic Instruments: Compactors |
| 12/22/2025 |
Dental/
ENT |
4-363 |
Complete |
ISO |
3630-5 Second edition 2020-08 |
Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments |
| ANSI ADA |
Standard No. 28-2021 |
Endodontic Instruments - Shaping and Cleaning Instruments |
| 12/22/2025 |
Dental/
ENT |
4-365 |
Complete |
ISO |
6873 Third edition 2013-04 |
Dentistry - Gypsum products |
| ANSI ADA |
Standards No. 25-2015 (R2021) |
Dental Gypsum Products |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
