|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 12/22/2025 |
Materials |
8-644 |
Complete |
ASTM |
F2848-25 |
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
| 12/22/2025 |
Materials |
8-646 |
Complete |
ASTM |
F624-25 |
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Medical Applications |
| 05/25/2026 |
Materials |
8-647 |
Complete |
ASTM |
F3260-25 |
Standard Test Method for Determining the Flexural Stiffness of Medical Textiles |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-129 |
Complete |
ISO CIE |
61966-2-1 First edition 1999-10 |
Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB [Including: Amendment 1 (2003) and Corrigendum 1 (2014)] |
| 08/14/2015 |
Radiology |
12-290 |
Complete |
IEC |
61910-1 Edition 1.0 2014-09 |
Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy |
| 07/15/2019 |
Materials |
8-493 |
Complete |
ISO |
13779-2 Third edition 2018-12 |
Implants for surgery - Hydroxyapatite - Part 2: Thermally sprayed coatings of hydroxyapatite |
| 12/23/2016 |
Orthopedic |
11-314 |
Complete |
ISO |
14242-2 Second edition 2016-09-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement |
| 08/21/2017 |
Anesthesiology |
1-124 |
Complete |
ISO |
8835-7 First edition 2011-11-01 |
Inhalational anaesthesia systems - Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases |
| 01/30/2014 |
General I (QS/
RM) |
5-84 |
Complete |
AAMI |
TIR 49:2013/(R)2020 |
Technical Information Report Design of training and instructional materials for medical devices used in non-clinical environments |
| 04/04/2016 |
Materials |
8-116 |
Complete |
ASTM |
F2258-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| 07/06/2020 |
Materials |
8-534 |
Complete |
ISO ASTM |
52911-1: First Edition 2019-07 |
Additive Manufacturing - Design - Part 1: Laser-based powder bed fusion of metals |
| 12/20/2021 |
Materials |
8-578 |
Complete |
ASTM |
F2848-21 |
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
| 12/23/2016 |
Orthopedic |
11-319 |
Complete |
ISO |
7206-12 First edition 2016-10-01 |
Implants for surgery - Partial and total hip joint prostheses - Part 12: Deformation test method for acetabular shells |
| 05/25/2026 |
Orthopedic |
11-443 |
Complete |
ASTM |
F2706-25 |
Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model |
| 12/21/2020 |
InVitro Diagnostics |
7-305 |
Complete |
ISO |
17511 Second edition 2020-04 |
In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples |
| 07/15/2019 |
Biocompatibility |
2-268 |
Complete |
ISO |
TS 21726 First edition 2019-02 |
Biological evaluation of medical devices - Application of the threshold of toxicological concern (TTC) for assessing biocompatibility of medical device constituents |
| 07/06/2020 |
General I (QS/
RM) |
5-126 |
Complete |
ISTA |
3A 2018 |
Packaged-Products for Parcel Delivery System Shipment 70 kg (150 lb) or Less |
| 12/23/2019 |
Physical Medicine |
16-227 |
Complete |
RESNA |
WC-4:2017 Section 18 |
American National Standard for Wheelchairs - Volume 4: Wheelchairs and Transportation Section 18: Wheelchair tiedown and occupant restraint systems for use in motor vehicles. |
| 12/23/2019 |
Physical Medicine |
16-229 |
Complete |
RESNA ANSI |
WC-4:2017 Section 20 |
American National Standard for Wheelchairs - Volume 4: Wheelchairs and Transportation Section 20: Seating systems for use in motor vehicles |
| 06/07/2021 |
Orthopedic |
11-383 |
Complete |
ASTM |
F3143-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
| 01/14/2019 |
Dental/
ENT |
4-250 |
Complete |
ISO |
7494-1 Third edition 2018-06 |
Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements |
| 12/23/2019 |
Physical Medicine |
16-215 |
Complete |
RESNA ANSI |
WC-2:2019 Section 9 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 9: Climatic tests for Eeectrically powered wheelchairs |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-137 |
Complete |
ISO |
23500-5 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
| ANSI AAMI ISO |
23500-5:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
| 05/25/2026 |
ObGyn/
Gastroenterology/
Urology |
9-153 |
Complete |
ISO |
23500-2 Second edition 2024-07 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies |
| 12/21/2020 |
Materials |
8-554 |
Complete |
ISO ASTM |
TR 52912 First edition 2020-09 |
Additive manufacturing - Design - Functionally graded additive manufacturing |
| 12/21/2020 |
Materials |
8-538 |
Complete |
ASTM |
F2759-19 |
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
| 01/14/2019 |
Dental/
ENT |
4-256 |
Complete |
ANSI ADA |
Standard No. 132-2015 |
Scanning Accuracy of Dental Chairside and Laboratory CAD/CAM Systems |
| 12/22/2025 |
InVitro Diagnostics |
7-349 |
Complete |
CLSI |
EP35 2nd Edition |
Assessment of Equivalence or Suitability of Specimen Types for Medical Laboratory Measurement Procedures |
| 07/06/2020 |
InVitro Diagnostics |
7-298 |
Complete |
CLSI |
EP35, 1st Edition |
Assessment of Equivalence or Suitability of Specimen Types for Medical Laboratory Measurement Procedures |
| 06/07/2021 |
InVitro Diagnostics |
7-306 |
Complete |
CLSI |
EP06 2nd Edition |
Evaluation of the Linearity of Quantitative Measurement Procedures |
| 05/25/2026 |
ObGyn/
Gastroenterology/
Urology |
9-156 |
Complete |
ISO |
23500-5 Second edition 2024-04 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
| 12/21/2020 |
Orthopedic |
11-373 |
Complete |
ASTM |
F1223-20 |
Standard Test Method for Determination of Total Knee Replacement Constraint |
| 12/21/2020 |
Orthopedic |
11-370 |
Complete |
ISO |
14879-1 Second edition 2020-07 |
Implants for surgery - Total knee-joint prostheses - Part 1: Determination of endurance properties of knee tibial trays |
| 06/07/2021 |
Radiology |
12-335 |
Complete |
IEC |
60336 Edition 5.0 2020-12 |
Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics [Including: Corrigendum 1 (2022)] |
| 12/22/2025 |
Software/
Informatics |
13-154 |
Complete |
IEEE |
Std 11073-10429-2022 |
Health informatics - Device Interoperability - Part 10429: Personal Health Device Communication - Device Specialization - Spirometry |
| 05/26/2025 |
Biocompatibility |
2-306 |
Complete |
ASTM |
F1439-24 |
Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials |
| 07/06/2020 |
General I (QS/
RM) |
5-129 |
Complete |
IEC |
62366-1 Edition 1.1 2020-06 CONSOLIDATED VERSION |
Medical devices - Part 1: Application of usability engineering to medical devices |
| ANSI AAMI IEC |
62366-1:2015+AMD1:2020 (Consolidated Text) |
Medical devices Part 1: Application of usability engineering to medical devices, including Amendment 1 |
| 12/21/2020 |
Sterility |
14-552 |
Complete |
ISO ASTM |
51818 Fourth edition 2020-06 |
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV |
| 12/23/2019 |
InVitro Diagnostics |
7-293 |
Complete |
CLSI |
QMS01, 5th ed. June 2019 (Replaces QMS01-A4) |
A Quality Management System Model for Laboratory Services. |
| 01/14/2019 |
Software/
Informatics |
13-106 |
Complete |
ISO IEEE |
11073-10207-2019 |
Health informatics - Point-of-care medical device communication Part 10207: Domain information and service model for service-oriented point-of-care medical device communication |
| IEEE |
Std 11073-10207-2017 |
Health informatics - Point-of-care medical device communication Part 10207: Domain Information and Service Model for Service-Oriented Point-of-Care Medical Device Communication |
| 12/22/2025 |
Anesthesiology |
1-202 |
Complete |
ISO |
19223-3 First edition 2025-09 |
Lung ventilators and related equipment - Vocabulary and semantics - Part 3: Respiratory care |
| 05/25/2026 |
General Plastic Surgery/
General Hospital |
6-521 |
Complete |
IEC |
60601-2-2 Edition 6.1 2023-02 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories [Including: Amendment 1 (2023), Interpretation Sheet 1 (2025)] |
| 05/25/2026 |
Dental/
ENT |
4-397 |
Complete |
ISO |
23298 First edition 2023-05 |
Dentistry - Test methods for machining accuracy of computer-aided milling machines |
| 12/21/2020 |
Ophthalmic |
10-119 |
Complete |
ISO |
11979-5 Third edition 2020-09 |
Ophthalmic implants - Intraocular Lenses - Part 5: Biocompatibility |
| 12/23/2019 |
Cardiovascular |
3-162 |
Complete |
ASTM |
F3374-19 |
Standard Guide for Active Fixation Durability of Endovascular Prostheses |
| 12/23/2024 |
Radiology |
12-364 |
Complete |
IEC |
61223-3-8 Edition 1.0 2024-03 |
Evaluation and routine testing in medical imaging departments - Part 3-8: Acceptance and constancy tests - Imaging performance of X-ray equipment for radiography and radioscopy
|
| 12/23/2019 |
InVitro Diagnostics |
7-295 |
Complete |
CLSI |
M52, 1st ed. August 2015 (Reaffirmed: January 2020) |
Verification of Commercial Microbial Identification and Antimicrobial Susceptibility Testing Systems. |
| 12/23/2019 |
Physical Medicine |
16-208 |
Complete |
RESNA ANSI |
WC-2:2019 Section 2 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 2: Determination of dynamic stability of electrically powered wheelchairs |
| 12/23/2019 |
Physical Medicine |
16-212 |
Complete |
RESNA ANSI |
WC-2:2019 Section 6 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 6: Determination of maximum speed of electrically powered wheelchairs. |
| 12/23/2019 |
Physical Medicine |
16-218 |
Complete |
RESNA ANSI |
WC-1:2019 Section 13 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 13: Determination of Coefficient of Friction of Test Surfaces |
| 06/07/2021 |
Materials |
8-557 |
Complete |
ASTM |
F3268-18a |
Standard Guide for in vitro Degradation Testing of Absorbable Metals |
| 12/23/2024 |
Radiology |
12-365 |
Complete |
IEC |
60627 Edition 3.0 2013-07 |
Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids |
| 12/23/2024 |
Radiology |
12-366 |
Complete |
IEC |
61223-3-6 Edition 1.0 2020-02 |
Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation |
| 12/21/2020 |
General II (ES/
EMC) |
19-37 |
Complete |
IEC |
60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
| 08/06/2013 |
Cardiovascular |
3-115 |
Complete |
IEC |
60601-2-34 Edition 3.0 2011-05 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety, including essential performance, of invasive blood pressure monitoring equipment |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-505 |
Complete |
ISO |
21649 Second Edition 2023-01 |
Needle-free injectors for medical use -- Requirements and test methods |
| 12/21/2020 |
Materials |
8-550 |
Complete |
ASTM |
F2181-20 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| 12/21/2020 |
Materials |
8-553 |
Complete |
ISO ASTM |
52903-1 First edition 2020-04 |
Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials |
| 12/21/2020 |
InVitro Diagnostics |
7-299 |
Complete |
CLSI |
POCT14 2nd Edition |
Point-of-Care Coagulation Testing and Anticoagulation Monitoring |
| 01/30/2014 |
Cardiovascular |
3-118 |
Complete |
ANSI AAMI |
EC57:2012 |
Testing and reporting performance results of cardiac rhythm and ST-segment measurement algorithms |
| 06/07/2021 |
Dental/
ENT |
4-273 |
Complete |
ANSI ASA |
S3.7-2016 (Reaffirmed 2025) |
American National Standard Method for Coupler Calibration of Earphones |
| 03/18/2009 |
InVitro Diagnostics |
7-145 |
Complete |
CLSI |
H42-A2 (Replaces H42-A) |
Enumeration of Immunologically Defined Cell Populations by Flow Cytometry; Approved Guideline - Second Edition. |
| 03/16/2012 |
Tissue Engineering |
15-31 |
Complete |
ASTM |
F2312-11 (Reapproved 2020) |
Standard Terminology Relating to Tissue Engineered Medical Products |
| 06/07/2018 |
Ophthalmic |
10-109 |
Complete |
ISO |
18369-1 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| 06/07/2018 |
Materials |
8-337 |
Complete |
ASTM |
F621-12 (Reapproved 2017) |
Standard Specification for Stainless Steel Forgings for Surgical Implants |
| 12/23/2019 |
General II (ES/
EMC) |
19-32 |
Complete |
IEC |
62133-1 Edition 1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems |
| 08/14/2015 |
InVitro Diagnostics |
7-257 |
Complete |
CLSI |
M56-A |
Principles and procedures for Detection of Anaerobes in Clinical Specimens; Approved Guideline |
| 04/04/2016 |
Physical Medicine |
16-196 |
Complete |
ISO |
7176-7 First Edition 1998-05-15 |
Wheelchairs - Part 7: Measurement of seating and wheel dimensions |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2023) |
Standard Terminology for Surgical Suture Needles |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-426 |
Complete |
ISO |
23907-1 First edition 2019-01 |
Sharps injury protection - Requirements and test methods - Sharps containers |
| 12/23/2016 |
Biocompatibility |
2-245 |
Complete |
ISO |
10993-5 Third edition 2009-06-01 |
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity |
| ANSI AAMI ISO |
10993-5:2009/(R)2014 |
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity |
| 06/07/2018 |
Biocompatibility |
2-249 |
Complete |
ISO |
10993-16 Third edition 2017-05 |
Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables |
| 06/07/2018 |
Tissue Engineering |
15-54 |
Complete |
ASTM |
F3207-17 |
Standard Guide for in vivo Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
| 06/07/2021 |
Ophthalmic |
10-124 |
Complete |
ISO |
11979-1 Fourth edition 2018-11 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary |
| 06/07/2018 |
ObGyn/
Gastroenterology/
Urology |
9-115 |
Complete |
ISO |
29943-1 First edition 2017-07. |
Condoms -- Guidance on clinical studies -- Part 1: Male condoms, clinical function studies based on self-reports |
| 01/30/2014 |
Materials |
8-358 |
Complete |
ASTM |
F1855-00 (Reapproved 2019) |
Standard Specification for Polyoxymethylene (Acetal) for Medical Applications |
| 08/14/2015 |
Sterility |
14-465 |
Complete |
ISO ASTM |
51707 Third edition 2015-03-15 |
Guide for estimating uncertainties in dosimetry for radiation processing |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-382 |
Complete |
ISO |
11608-7 First edition 2016-08-01 |
Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment |
| 08/21/2017 |
Dental/
ENT |
4-232 |
Complete |
ISO |
20795-1 Second edition 2013-03-01 |
Dentistry - Base polymers - Part 1: Denture base polymers |
| 08/14/2015 |
Software/
Informatics |
13-77 |
Complete |
ISO IEC |
29147 First edition 2014-02-15 |
Information technology - Security techniques - Vulnerability disclosure |
| 12/20/2021 |
Cardiovascular |
3-180 |
Complete |
ASTM |
F3505-21 |
Standard Test Method for Stent and Endovascular Prosthesis Kink Resistance |
| 08/21/2017 |
Orthopedic |
11-269 |
Complete |
ASTM |
F2423-11 (Reapproved 2020) |
Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses |
| 07/09/2014 |
Materials |
8-378 |
Complete |
ASTM |
D792-13 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| 05/30/2022 |
Materials |
8-588 |
Complete |
ASTM |
F560-22 |
Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
| 12/20/2021 |
Orthopedic |
11-390 |
Complete |
ISO |
23089-2 First edition 2021-05 |
Implants for surgery - Preclinical mechanical assessment of spinal implants and particular requirements - Part 2: Spinal intervertebral body fusion devices |
| 04/04/2016 |
Materials |
8-403 |
Complete |
ASTM |
D638-14 |
Standard Test Method for Tensile Properties of Plastics |
| 04/04/2016 |
Materials |
8-408 |
Complete |
ASTM |
F3122-14 |
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| 08/21/2017 |
Materials |
8-457 |
Complete |
ISO |
13175-3 First edition 2012-10-01 |
Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| 12/21/2020 |
Dental/
ENT |
4-265 |
Complete |
ISO |
10271 Third edition 2020-08 |
Dentistry - Corrosion test methods for metallic materials |
| ANSI ADA |
Standard No. 97-2020 |
Corrosion Test Methods for Metallic Materials |
| 01/14/2019 |
Orthopedic |
11-342 |
Complete |
ASTM |
F732-17 (Reapproved 2025) |
Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
| 07/06/2020 |
Materials |
8-536 |
Complete |
ISO ASTM |
52902:First Edition 2019-07 |
Additive Manufacturing -Test Artifacts - Geometric capability assessment of additive manufacturing systems |
| 01/14/2019 |
Materials |
8-483 |
Complete |
ASTM |
F601-18 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 12/23/2024 |
Dental/
ENT |
4-329 |
Complete |
ISO |
6872 Fifth edition 2024-08 |
Dentistry - Ceramic materials |
| 12/23/2024 |
General II (ES/
EMC) |
19-51 |
Complete |
UL |
1642 Sixth Edition September 29, 2020 |
Standard For Safety Lithium Batteries |
| 09/17/2018 |
Orthopedic |
11-333 |
Complete |
ASTM |
F382-17 |
Standard Specification and Test Method for Metallic Bone Plates |
| 12/23/2024 |
Orthopedic |
11-415 |
Complete |
ASTM |
F2554-22 |
Standard Practice for Measurement of Positional Accuracy of Computer-Assisted Surgical Systems |
| 07/09/2014 |
General II (ES/
EMC) |
19-10 |
Complete |
UL |
1642 5th Edition |
Lithium Batteries |
| 12/22/2025 |
Orthopedic |
11-428 |
Complete |
ASTM |
F1541-24 |
Standard Specification and Test Methods for External Skeletal Fixation Devices |
| 09/17/2018 |
Orthopedic |
11-322 |
Complete |
ASTM |
F1541-17 |
Standard Specification and Test Methods for External Skeletal Fixation Devices |
| 12/19/2022 |
Biocompatibility |
2-289 |
Complete |
ISO |
10993-12 Fifth edition 2021-01 |
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
