|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 03/16/2012 |
Radiology |
12-175 |
Complete |
ISO |
24013 First edition 2006-11-15 |
Optics and photonics -- Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation |
| 09/21/2016 |
InVitro Diagnostics |
7-266 |
Complete |
CLSI |
EP19 2nd Edition (Replaces EP19-R) |
A Framework for Using CLSI Documents to Evaluate Clinical Laboratory Measurement Procedures |
| 05/26/2025 |
InVitro Diagnostics |
7-334 |
Complete |
CLSI |
AUTO05-A |
Laboratory Automation: Electromechanical Interfaces; Approved Standard |
| 07/06/2020 |
Biocompatibility |
2-275 |
Complete |
ISO |
10993-7 Second edition 2008-10-15 |
Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals [Including: Technical Corrigendum 1 (2009), AMENDMENT 1: Applicability of allowable limits for neonates and infants (2019)] |
| 12/21/2020 |
General II (ES/
EMC) |
19-37 |
Complete |
IEC |
60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
| 12/21/2020 |
InVitro Diagnostics |
7-299 |
Complete |
CLSI |
POCT14 2nd Edition |
Point-of-Care Coagulation Testing and Anticoagulation Monitoring |
| 12/23/2024 |
InVitro Diagnostics |
7-324 |
Complete |
CLSI |
M07 12th Edition |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically |
| 08/14/2015 |
Radiology |
12-291 |
Complete |
IEC |
62127-2 Edition 1.2 2017-03 CONSOLIDATED VERSION |
Ultrasonics -- Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz |
| 07/15/2019 |
Orthopedic |
11-353 |
Complete |
ISO |
18192-3 First edition 2017-06 |
Implants for surgery - Wear of total intervertebral spinal disc prostheses - Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions |
| 07/15/2019 |
Materials |
8-514 |
Complete |
ISO |
5834-2 Fifth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms |
| 12/21/2020 |
Physical Medicine |
16-230 |
Complete |
RESNA ANSI |
WC-2:2019 Section 25 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 25: Batteries and Chargers for Powered Wheelchairs |
| 12/21/2020 |
Materials |
8-554 |
Complete |
ISO ASTM |
TR 52912 First edition 2020-09 |
Additive manufacturing - Design - Functionally graded additive manufacturing |
| 12/21/2020 |
Materials |
8-537 |
Complete |
ASTM |
F620-20 |
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| 12/21/2020 |
Anesthesiology |
1-147 |
Complete |
ISO |
26825 Second edition 2020-10 |
Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance |
| 05/26/2025 |
Radiology |
12-368 |
Complete |
ISO |
13696 Second edition 2022-06 |
Optics and photonics - Test methods for radiation scattered by optical components |
| 10/04/2004 |
Radiology |
12-116 |
Complete |
ISO |
13696:2002 |
Optics and optical instruments -- Test methods for radiation scattered by optical components |
| 05/26/2025 |
Radiology |
12-367 |
Complete |
ISO |
13695 Second edition 2024-11 |
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers |
| 05/26/2025 |
InVitro Diagnostics |
7-331 |
Complete |
CLSI |
AUTO02-A2 |
Laboratory Automation: Bar Codes for Specimen Container Identification - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-333 |
Complete |
CLSI |
AUTO04-A |
Laboratory Automation: Systems Operational Requirements, Characteristics, and Information Elements; Approved Standard |
| 07/06/2020 |
Cardiovascular |
3-167 |
Complete |
ISO |
TS 81060-5 First edition 2020-02 |
Non-invasive sphygmomanometers - Part 5: Requirements for the repeatability and reproducibility of NIBP simulators for testing of automated non-invasive sphygmomanometers |
| 06/27/2016 |
Materials |
8-429 |
Complete |
ASTM |
F2224-09 (Reapproved 2020) |
Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
| 08/21/2017 |
Cardiovascular |
3-149 |
Complete |
ISO |
25539-1 Second edition 2017-02 |
Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses |
| ANSI AAMI ISO |
25539-1:2017 |
Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses |
| 12/19/2022 |
Anesthesiology |
1-160 |
Complete |
ISO |
80601-2-84 First edition 2020-07 |
Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment |
| 12/23/2024 |
InVitro Diagnostics |
7-322 |
Complete |
CLSI |
M47 2nd Edition |
Principles and Procedures for Blood Cultures |
| 03/18/2009 |
InVitro Diagnostics |
7-189 |
Complete |
CLSI |
M47-A (Replaces M47-P) |
Principles and Procedures for Blood Cultures; Approved Guideline |
| 12/21/2020 |
Anesthesiology |
1-148 |
Complete |
ISO |
80601-2-69 Second edition 2020-11 |
Medical electrical equipment - Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment |
| 06/07/2021 |
Orthopedic |
11-378 |
Complete |
ASTM |
F2502-17 |
Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
| 12/23/2024 |
Sterility |
14-609 |
Complete |
AAMI |
TIR17:2024 |
Compatibility of materials subjected to sterilization |
| 05/26/2025 |
Radiology |
12-383 |
Complete |
NEMA |
NU 1-2023 |
Performance Measurements of Gamma Cameras |
| 06/07/2021 |
Radiology |
12-337 |
Complete |
NEMA |
NU 1-2018 |
Performance Measurements of Gamma Cameras |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-444 |
Complete |
ASTM |
D7103-19(2023) |
Standard Guide for Assessment of Medical Gloves |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-137 |
Complete |
ISO |
23500-5 First edition 2019-02 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
| ANSI AAMI ISO |
23500-5:2019 |
Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies |
| 07/15/2019 |
Radiology |
12-326 |
Complete |
NEMA |
NU 2-2018 |
Performance Measurements of Positron Emission Tomographs |
| 07/28/2025 |
General II (ES/
EMC) |
19-57 |
Complete |
IEC |
61326-2-6 Edition 4.0 2025-06 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| 05/26/2025 |
Dental/
ENT |
4-339 |
Complete |
ANSI ADA |
Standard No. 119-2023 |
Dentistry-Manual Toothbrushes |
| 12/21/2020 |
Materials |
8-545 |
Complete |
ASTM |
F2977-20 |
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
| 12/21/2020 |
InVitro Diagnostics |
7-301 |
Complete |
CLSI |
GP42 7th Edition |
Collection of Capillary Blood Specimens |
| 07/15/2019 |
Biocompatibility |
2-268 |
Complete |
ISO |
TS 21726 First edition 2019-02 |
Biological evaluation of medical devices - Application of the threshold of toxicological concern (TTC) for assessing biocompatibility of medical device constituents |
| 05/30/2022 |
Dental/
ENT |
4-293 |
Complete |
ANSI ADA |
Standard No. 119-2021 |
Manual Toothbrushes |
| 05/26/2025 |
Dental/
ENT |
4-340 |
Complete |
ANSI ADA |
Standard No. 46-2016 |
Dental Patient Chair |
| 05/26/2025 |
Dental/
ENT |
4-341 |
Complete |
ANSI ADA |
Standard No. 47-1-2021 |
Stationary Dental Units and Patient Chairs-Part 1: General Requirements |
| 05/26/2025 |
Dental/
ENT |
4-342 |
Complete |
ANSI ADA |
Standard No. 47-2-2021 |
Stationary Dental Units and Patient Chairs-Part 2: Air, Water, Suction and Wastewater Systems |
| 05/26/2025 |
Dental/
ENT |
4-343 |
Complete |
ANSI ADA |
Standard No. 105-2024 |
Elastomeric Auxiliaries for Use in Orthodontics |
| 05/26/2025 |
Dental/
ENT |
4-344 |
Complete |
ANSI ADA |
Standard No. 186-2024 |
Dentistry - Polymer-based Machinable Blanks |
| 12/21/2020 |
Materials |
8-544 |
Complete |
ASTM |
F961-20 |
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| 12/21/2020 |
Ophthalmic |
10-120 |
Complete |
ISO |
TR 22979 Second Edition 2017-05 |
Ophthalmic implants - Intraocular Lenses - Guidance on assessment of the need for clinical investigation of intraocular lens design modifications |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-132 |
Complete |
ASTM |
F623-19 |
Standard Performance Specification for Foley Catheter |
| 06/07/2021 |
Cardiovascular |
3-170 |
Complete |
ISO |
14708-5 Second edition 2020-05 |
Implants for surgery - Active implantable medical devices - Part 5: Circulatory support devices |
| 12/21/2020 |
InVitro Diagnostics |
7-300 |
Complete |
CLSI |
MM13 2nd Edition |
Collection, Transport, Preparation, and Storage of Specimens for Molecular Methods |
| 05/26/2025 |
Software/
Informatics |
13-146 |
Complete |
IEEE |
11073-10103 Second edition 2023 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 06/27/2016 |
Software/
Informatics |
13-84 |
Complete |
ISO IEEE |
11073-10103 First edition 2014-03-01 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 05/26/2025 |
InVitro Diagnostics |
7-335 |
Complete |
CLSI |
POCT01-A2 |
Point-of-Care Connectivity - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-336 |
Complete |
CLSI |
LIS02-A2 |
Standard Specification for Transferring Information Between Clinical Instruments and Computer Systems; Approved Standard-Second Edition. |
| 05/26/2025 |
InVitro Diagnostics |
7-340 |
Complete |
CLSI |
LIS01-A2 |
Standard Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems - Second Edition. |
| 05/26/2025 |
InVitro Diagnostics |
7-338 |
Complete |
CLSI |
AUTO10-A |
Autoverification of Clinical Laboratory Test Results; Approved Guideline |
| 05/26/2025 |
InVitro Diagnostics |
7-339 |
Complete |
CLSI |
AUTO09-A |
Remote Access to Clinical Laboratory Diagnostic Devices via the Internet; Approved Standard |
| 12/21/2020 |
ObGyn/
Gastroenterology/
Urology |
9-130 |
Complete |
ISO |
8600-6 Second edition 2020-09 |
Endoscopes - Medical endoscopes and endotherapy devices - Part 6: Vocabulary |
| 07/15/2019 |
Materials |
8-496 |
Complete |
ISO |
5834-4 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method |
| 07/15/2019 |
Materials |
8-497 |
Complete |
ISO |
5834-5 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5: Morphology assessment method |
| 12/21/2020 |
Materials |
8-538 |
Complete |
ASTM |
F2759-19 |
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
| 12/21/2020 |
Materials |
8-539 |
Complete |
ASTM |
F139-19 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| 12/21/2020 |
Anesthesiology |
1-149 |
Complete |
ISO |
7376 Third edition 2020-08 |
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation |
| 04/04/2016 |
Software/
Informatics |
13-81 |
Complete |
ISO IEEE |
11073-10419 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10419: Device specialization - Insulin pump |
| IEEE |
Std 11073-10419:2015 |
Health informatics - Personal health device communication - Part 10419: Device Specialization - Insulin Pump |
| 08/06/2013 |
Software/
Informatics |
13-56 |
Complete |
ISO IEEE |
11073-10406 First edition 2012-12-01 |
Health informatics - Personal health device communication - Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) |
| IEEE |
Std 11073-10406-2011 |
Health informatics - Personal health device communication Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) |
| 06/07/2021 |
InVitro Diagnostics |
7-307 |
Complete |
CLSI |
POCT05 2nd Edition |
Performance Metrics for Continuous Interstitial Glucose Monitoring |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-510 |
Complete |
IEC |
80601-2-77 Edition 1.1 2023-11 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-77: Particular requirements for the BASIC SAFETY and essential performance of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT |
| 12/23/2024 |
Cardiovascular |
3-193 |
Complete |
ISO |
12417-1 Second edition 2024-02 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements |
| 05/26/2025 |
InVitro Diagnostics |
7-341 |
Complete |
CLSI |
AUTO03-A2 |
Laboratory Automation: Communications with Automated Clinical Laboratory Systems, Instruments, Devices, and Information Systems; Approved Standard - Second Edition |
| 01/14/2019 |
Sterility |
14-518 |
Complete |
AAMI ANSI |
ST55:2016/(R)2023 |
Table-top steam sterilizers |
| 07/26/2016 |
Biocompatibility |
2-170 |
Complete |
ISO |
10993-14 First edition 2001-11-15 |
Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics |
| ANSI AAMI ISO |
10993-14:2001/(R) 2011 |
Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products form ceramics |
| 01/14/2019 |
Neurology |
17-14 |
Complete |
ANSI AAMI |
NS4:2013(R)2017 |
Transcutaneous Electrical Nerve Stimulators |
| 01/14/2019 |
Physical Medicine |
16-204 |
Complete |
ISO |
7176-6 Third edition 2018-06 |
Wheelchairs - Part 6: Determination of maximum speed of electrically powered wheelchairs |
| 01/14/2019 |
Cardiovascular |
3-79 |
Complete |
ASTM |
F2079-09 (Reapproved 2017) |
Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents |
| 06/27/2016 |
Cardiovascular |
3-143 |
Complete |
ISO |
12417-1 First edition 2015-10-01 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-512 |
Complete |
IEC |
60601-2-35 Edition 2.1 2023-12 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
| 07/06/2020 |
Orthopedic |
11-368 |
Complete |
ASTM |
F3334-19 |
Standard Practice for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Tibial Components |
| 07/06/2020 |
Orthopedic |
11-369 |
Complete |
ASTM |
F3292-19 |
Standard Practice for Inspection of Spinal Implants Undergoing Testing |
| 07/06/2020 |
Radiology |
12-334 |
Complete |
AAMI |
RT3:2020 |
Radiation therapy machine characterization |
| 01/27/2015 |
Software/
Informatics |
13-72 |
Complete |
ISO IEEE |
11073-10425 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) |
| IEEE |
Std 11073-10425-2014 |
Health informatics - Personal health device communication, Part 10425: Device Specialization - Continuous Glucose Monitor (CGM) |
| 05/26/2025 |
InVitro Diagnostics |
7-332 |
Complete |
CLSI |
AUTO01-A |
Laboratory Automation: Specimen Container/Specimen Carrier; Approved Standard |
| 03/16/2012 |
Radiology |
12-115 |
Complete |
ISO |
13695:2004 |
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers |
| 05/26/2025 |
Radiology |
12-369 |
Complete |
ISO |
11146-1 Second edition 2021-07 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| 03/16/2012 |
Radiology |
12-134 |
Complete |
ISO |
11146-1 First edition 2005-01-15 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| 07/06/2020 |
Radiology |
12-325 |
Complete |
NEMA |
Standards Publication XR 25 -2019 |
Computed Tomography Dose Check |
| 12/23/2019 |
Dental/
ENT |
4-261 |
Complete |
ISO |
7405 Third edition 2018-10 Corrected version 2018-12 |
Dentistry - Evaluation of biocompatibility of medical devices used in dentistry |
| 12/23/2019 |
Dental/
ENT |
4-262 |
Complete |
IEC |
80601-2-60 Edition 2.0 2019-06 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
| 12/23/2019 |
Orthopedic |
11-361 |
Complete |
ISO |
14243-5 First edition 2019-05 |
Implants for surgery - Wear of total knee prostheses - Part 5: Durability performance of the patellofemoral joint |
| 05/26/2025 |
Cardiovascular |
3-198 |
Complete |
ISO |
25539-3 Second edition 2024-10 |
Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters |
| 08/20/2012 |
Cardiovascular |
3-103 |
Complete |
ISO |
25539-3 First edition 2011-12-01 |
Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters |
| ANSI AAMI ISO |
25539-3:2011 |
Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters |
| 05/26/2025 |
Cardiovascular |
3-199 |
Complete |
ASTM |
F1841-25 |
Standard Practice for Assessment of Hemolysis in Blood Pumps |
| 12/23/2019 |
General I (QS/
RM) |
5-125 |
Complete |
ISO |
14971 Third Edition 2019-12 |
Medical devices - Application of risk management to medical devices |
| ANSI AAMI ISO |
14971: 2019 |
Medical devices - Applications of risk management to medical devices |
| 12/23/2019 |
Dental/
ENT |
4-260 |
Complete |
ANSI ASA |
S12.2-2019 (Reaffirmed 2023) |
American National Standard for Criteria for Evaluating Room Noise |
| 12/23/2019 |
Materials |
8-499 |
Complete |
ASTM |
F1580-18 |
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| 09/17/2018 |
Orthopedic |
11-327 |
Complete |
ASTM |
F543-17 |
Standard Specification and Test Methods for Metallic Medical Bone Screws |
| 05/26/2025 |
Radiology |
12-377 |
Complete |
IEC |
62127-03 Edition 2.0 2022-12 |
Ultrasonics -- Hydrophones -- Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz |
| 12/21/2020 |
Dental/
ENT |
4-266 |
Complete |
ISO |
19023 First edition 2018-02 |
Dentistry - Orthodontic anchor screws |
| ANSI ADA |
Standard No. 178-2019 |
Orthodontic Anchor Screws |
| 12/21/2020 |
Dental/
ENT |
4-268 |
Complete |
ISO |
15841 Second edition 2014-08 |
Dentistry - Wires for use in orthodontics [Including AMENDMENT 1 (2020)] |
| ANSI ADA |
Standard No. 32-2017 |
Orthodontic Wires |
| 07/15/2019 |
Orthopedic |
11-357 |
Complete |
ISO |
15142-3 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 3: Connection devices and reamer diameter instruments |
| 07/06/2020 |
Sterility |
14-545 |
Complete |
ISO ASTM |
51276 Fourth edition 2019-08 |
Practice for use of a polymethylmethacrylate dosimetry system |
| 07/06/2020 |
Sterility |
14-549 |
Complete |
ASTM |
F3004-13 (Reapproved 2020) |
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
