The user facility reported to olympus that their oer-pro generated the following error codes: "e02: cleaning fluid is not drained, e05: cleaning fluid level is too high, and e13: takes little time to fill the basin." in addition, the reporter stated that the retaining racks are damaged; "one is rusty." the user facility verified that no patient harm or injury is associated with the reported problems and the oer-pro is not in use.The cleaning and disinfectant solutions used in the oer-pro is aldahol.Only olympus endoscopes are being reprocessed in the oer-pro.It is unknown how often the minimum effective concentration is being checked.Only olympus connector tubes are used.When the device was inspected a stress crack was observed in the fluid level sensors.Two scopes are reprocessed per cycle.The oer-pro was set up properly and the connecting tubes were connected properly.The connecting tubes were not kinked.
|