Model Number 10604 |
Device Problems
Break (1069); Entrapment of Device (1212)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 06/01/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
Device is a combination product.
|
|
Event Description
|
It was reported that catheter entrapment and shaft break occurred.The target lesion was located in the circumflex artery.Following pre-dilation of a 3.0mm and 3.5mm nc emerge balloon catheter, a 4.00 x 24mm synergy drug-eluting stent was successfully implanted past the nominal pressure.However, when the delivery system was removed, the device was stuck and the shaft broke inside the guide catheter when pulled harder.The guide was pushed in as the entire delivery system was pulled out completely.The stent was post-dilated with a 5.0mm nc emerge balloon catheter, completing the procedure.No further complications were reported.
|
|
Event Description
|
It was reported that catheter entrapment and shaft break occurred.The target lesion was located in the circumflex artery.Following pre-dilation of a 3.0mm and 3.5mm nc emerge balloon catheter, a 4.00 x 24mm synergy drug-eluting stent was successfully implanted past the nominal pressure.However, when the delivery system was removed, the device was stuck and the shaft broke inside the guide catheter when pulled harder.The guide was pushed in as the entire delivery system was pulled out completely.The stent was post-dilated with a 5.0mm nc emerge balloon catheter, completing the procedure.No further complications were reported.
|
|
Manufacturer Narrative
|
Device is a combination product.Device evaluated by mfr.: synergy ii us mr 4.00 x 24mm stent delivery system was returned for analysis.The device was returned without the stent attached.The balloon cones were reviewed, the cones were identified to be in a deflated state with a red/brown substance visible.A visual examination of the bumper tip showed no signs of damage.A visual and tactile examination of the hypotube found multiple kinks as well as a red/brown substance visible in the manifold.A visual examination of the outer and inner lumen and mid-shaft section found the device broken at the guidewire exchange port 260mm proximal to the distal tip.The corewire was exposed.No other issues were identified during the product analysis.
|
|
Search Alerts/Recalls
|