MAUDE Adverse Event Report: INTEGRA LIFESCIENCES MANSFIELD SURG PATXRAY 1/2X1/2-200; SURGICAL PATTIES

Catalog Number 801400

Device Problems Flaked (1246); Material Deformation (2976)

Patient Problem No Known Impact Or Consequence To Patient (2692)

Event Date 09/01/2019

Event Type  malfunction  

Manufacturer Narrative

Attempts are being made to obtain additional information.Upon completion of the investigation, a follow-up report will be submitted.

Event Description

The surgeon was working with a pattie and it left lots of debris particles and tears in pattie itself which was unusual.The whole pack was the same problem.Patties were discarded and a different lot was used.No patient injury and the event led to 20 minutes surgical delay.

Manufacturer Narrative

Complaint sample was not returned for evaluation and lot number information has not been provided; therefore, an evaluation of the device could not be performed, and manufacturing records could not be reviewed.The cause(s) of the difficulty reported by the customer could not be determined.If additional relevant information becomes available in the future, this complaint will be reopened, and the respective evaluation performed.Between 05nov2019 and 30jun2020, approximately 2,200 mdrs submitted electronically by integra lifesciences via trackwise, integra's complaint handling system, were not received by cdrh due to a computer system issue.Within this time period, an error with integra's middleware, which facilitates communications between trackwise and the fda system, caused the complaint records to close and indicate we had received an acknowledgement 3 from the fda when we had not.Integra interpreted the acknowledgement as a successful submission; however, subsequent investigation revealed the acknowledgement 3 received was from our middleware and not from the fda (these acknowledgements have been retained as part of the documentation of the mdr).The malfunction was related to the relocation of the trackwise application to a new data center during the transition of integra's corporate headquarters from plainsboro, nj to princeton, nj.Previously, integra had been successfully receiving acknowledgements 1, 2, and 3 from the fda, and our records reflect these acknowledgements, including the date and time stamps.Capa pr 229048 and nc 20-011 have been opened by integra to further investigate the nonconformance and develop a corrective action plan.The middleware error has been corrected, and integra has filed mdrs since the correction and verified that the appropriate acknowledgements have been received from the fda.Integra is resubmitting all impacted mdr reports for the time period 05nov2019 through 30jun2020.Integra lifesciences contacted donna engleman, director of regulatory programs, office of product evaluation and quality and michelle rios, assistant director, mdr team, office of product evaluation and quality on july 8-9, 2020 to report these issues regarding mdr reports.

• Brand Name: SURG PATXRAY 1/2X1/2-200
• Type of Device: SURGICAL PATTIES
• Manufacturer (Section D): INTEGRA LIFESCIENCES MANSFIELD; 11 cabot boulevard; 11 cabot boulevard; mansfield MA 02048
• MDR Report Key: 10278824
• MDR Text Key: 203489807
• Report Number: 1226348-2020-00078
• Device Sequence Number: 1
• Product Code: HBA
• Combination Product (y/n): N
• PMA/PMN Number: K880402
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: foreign
• Type of Report: Initial,Followup
• Report Date: 01/28/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/15/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 801400
• Was Device Available for Evaluation?: No
• Date Manufacturer Received: 03/11/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1