Model Number 10604 |
Device Problems
Deflation Problem (1149); Difficult to Remove (1528)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 07/01/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
Device is a combination product.
|
|
Event Description
|
It was reported that removal difficulties and balloon deflation failure occurred.The target lesion was located in a coronary artery.A 4.00 x 24 synergy drug-eluting stent was advanced for treatment.After placing the stent, it was noted that the stent balloon kept on getting caught on the guide when attempting to be removed and the balloon would not deflate properly.The physician then removed all the devices in order to removed the balloon.There were no patient complications nor injuries reported and the patient's status was fine.
|
|
Manufacturer Narrative
|
Synergy ii us mr 4.00 x 24mm stent delivery system was returned for analysis without the stent.A visual examination of the stent found that the stent was not returned as it was positioned and deployed successfully at the lesion site.The balloon cones were reviewed, and signs of positive pressure applied to the cones were noted as its wings were relaxed and not tightly folded.A visual and microscopic examination of the bumper tip showed no issues.A visual and tactile examination of the outer and mid-shaft section and a visual examination of the inner lumen found no issues.The device was placed in water bath overnight for soaking pre-inflation test.The device was loaded onto a guide wire and loaded into a test guide catheter without issue.The balloon was inflated using a pressure of 16 atm with no issues.Vacuum was pulled and the balloon deflated in 08 seconds with no issues.The device was withdrawn into a guide catheter and removed without issue.The encore inflation device was verified before and after use up to 16 atm using a druck gauge.No issues were identified during the product analysis.
|
|
Event Description
|
It was reported that removal difficulties and balloon deflation failure occurred.The target lesion was located in a coronary artery.A 4.00 x 24 synergy drug-eluting stent was advanced for treatment.After placing the stent, it was noted that the stent balloon was getting caught on the guide when attempting to be removed and the balloon would not deflate properly.The physician then removed all the devices in order to remove the balloon.There were no patient complications nor injuries reported and the patient's status was fine.
|
|
Search Alerts/Recalls
|