Reporter is jnj representative.Without a lot number, the device history records review could not be completed as no product was received.The investigation could not be completed, no product was received; no conclusion could be drawn at the time of filing this report.(b)(4).Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
Device report from (b)(6) reports an event as follows: it was reported that on (b)(6) 2020 that the patient underwent the removal of osteosynthesis material and a condylar support plate that had failed.The distal locking screws of the plate were loose and one was already exposed outside of the skin.An additional reduction was performed but the screws did not block the plate and it was decided to remove all the material and put a splint in one of the wounds that was found to be infected.The first intervention was performed because the distal screws of the plate came off.The second operation was performed to extract a screw that was exposed through the skin and the third intervention was when all of the material was removed.The first two interventions were performed to remove the implant and try to correct the new fracture, in the last surgery it was shown that there was an infection.Concomitant device reported: 4.5mm va-lcp condylar plate (part # 02.124.418, lot # l685509, quantity 1).This report is for one (1) 5.0mm cannulated conical screw 80mm.This is report 1 of 1 for (b)(4).This report is linked to (b)(4).
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.H3, h4, h6: a device history record (dhr) review was conducted: manufacturing location: monument manufacturing date: may 24, 2019, part number: 02.205.280, 5.0mm cannulated conical screw 80mm, lot number: 3l20230 (non-sterile), lot quantity: 91.Four pieces were scrapped in cell at op #20, gundrill, after a functional failure.One piece was scrapped in cell at op #30, mill threads, after a machine malfunction.Production order traveler met all inspection acceptance criteria apart from the five pieces noted.Inspection sheet, inspect turn/wobble broach/inspect gun drill/inspect mill threads/inspect grind flutes/final inspection, met all inspection acceptance criteria apart from the four pieces noted.Packaging label log (pll) was reviewed and determined to be conforming.Packaging bom was reviewed and determined to be conforming with no deviations to normal packaging identified.This lot met all dimensional, visual and packaging criteria at the time of release with no issues documented during the manufacture that would contribute to this complaint condition.Component part(s) reviewed: part number: 11222, 316l**ri8.50, lot number: h728604, lot quantity: 1,844 lbs.Certificate of tests supplied by carpenter dated aug 20, 2018 was reviewed and determined to be conforming.Lot summary report dated aug- 31, 2018 met all inspection acceptance criteria.Raw material receiving/putaway checklist met all inspection acceptance criteria.Device history review jul 10, 2020: dhr reviewed.This lot met all dimensional, visual and packaging criteria at the time of release with no issues documented during the manufacture that would contribute to this complaint condition.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|