MAUDE Adverse Event Report: PLEXUS MANUFACTURING SDN. BHD DUAL CHAMBER TEMPORARY PACEMAKER; PULSE-GENERATOR, PACEMAKER, EXTERNAL

Model Number 5392

Device Problem Unexpected Shutdown (4019)

Patient Problem No Patient Involvement (2645)

Event Type  malfunction  

Manufacturer Narrative

Product analysis: the external pulse generator (epg) shut down twice during manufacturers analysis.It was noted that the main printed circuit board (pcb) was out of specification electrical.All found defective parts were replaced and all other identified issues were resolved.The epg then passed final functional tests.If information is provided in the future, a supplemental report will be issued.

Event Description

The external pulse generator (epg) returned for preventative maintenance tested out of specification during manufacturer's analysis.There was no patient involvement.

Manufacturer Narrative

Further analysis of the main printed circuit board (pcb) of the external pulse generator (epg) found no anomalies on visual inspection.This analysis could not replicate the initial analysis of main pcb causing programmer to shut down and determined that the problem related to a bad q54 fet transistor.The device was tested using special software tools: automated test console and failed active current test:backlight on-off difference measuring out of the requirements of test specification.Troubleshooting found q54 fet transistor partially damaged and it was replaced with a known good fet transistor.The device was re-tested on automated test console and passed all tests.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: DUAL CHAMBER TEMPORARY PACEMAKER
• Type of Device: PULSE-GENERATOR, PACEMAKER, EXTERNAL
• Manufacturer (Section D): PLEXUS MANUFACTURING SDN. BHD; bayan lepas free industrial zo; bayan lepas 11900 ; MY 11900
• MDR Report Key: 10452717
• MDR Text Key: 204357551
• Report Number: 3004593495-2020-00964
• Device Sequence Number: 1
• Product Code: DTE
• Combination Product (y/n): N
• PMA/PMN Number: K150246
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Type of Report: Initial,Followup
• Report Date: 10/07/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 08/26/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 5392
• Device Catalogue Number: 5392
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 07/24/2020
• Date Manufacturer Received: 09/10/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1