MAUDE Adverse Event Report: MEDTRONIC PUERTO RICO OPERATIONS CO. INTELLIS; STIMULATOR, SPINAL-CORD, TOTALLY IMPLANTED FOR PAIN RELIEF

Model Number 97715

Device Problems Failure to Interrogate (1332); Shipping Damage or Problem (1570); Communication or Transmission Problem (2896); Insufficient Information (3190); Data Problem (3196)

Patient Problems No Known Impact Or Consequence To Patient (2692); No Clinical Signs, Symptoms or Conditions (4582)

Event Date 08/26/2020

Event Type  malfunction  

Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

Event Description

Information was received from a manufacturer representative (rep) concerning patient with an implantable neurostimulator (ins).Rep reported she was getting ready for implant yesterday.Caller reports she had set up the device initially, it behaved normally, and then when she went to re-connect again after the ins was open from the box, she encountered an error message: validation error system detected invalid data in the device.Therapy data maybe cleared error code 01 00 85 04 02 01 03 02 00 08 08 00 0a 02 00.Caller has an app version 1.3.80.Caller reports she ended up using a different ins and it worked fine.Troubleshooting indicated that caller continued to see the same message.Clearing out old history on her tablet and powering the communicator off twice did not resolve the issue.The communication manager: r52k61082zp 1.0.77.Rep went to hub and sync device and reapply profile for white and blacklis, and the comm.Manager, but she still can't connect to the implant.Rep was conferenced with mobility to get log files.No patient symptoms were reported.

Event Description

The rep said there was a failed battery.When attempting to interrogate the ins again, a validation error with option to exit the workflow or continue.The rep pressed continue which led to a system error 0x17acabdc and the rep was forced to restart the app.The ins was returned for analysis.

Manufacturer Narrative

H3: analysis of the implantable neurostimulator has not yet begun.A follow up report will be submitted once analysis is completed.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Product analysis #(b)(4):analysis information -- 2020-10-22 16:11:48 cst pli# 10 product id# 97715 below is unedited, system generated text based on the analysis finding code(s).The returned device was subjected to a series of standard tests that include but is not limited to visual inspection, output and telemetry testing, and functional testing.H3.Upon receipt validation error was observed.This was traced to the ins software/firmware.H6.Evaluation result code 3233 does not apply.Evaluation method code 4118 does not apply.Conclusion code 11 does not apply.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Res# 86872, z-0860-2021.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: INTELLIS
• Type of Device: STIMULATOR, SPINAL-CORD, TOTALLY IMPLANTED FOR PAIN RELIEF
• Manufacturer (Section D): MEDTRONIC PUERTO RICO OPERATIONS CO.; road 31, km. 24, hm 4; ceiba norte industrial park; juncos PR 00777
• MDR Report Key: 10465703
• MDR Text Key: 204940180
• Report Number: 3004209178-2020-14935
• Device Sequence Number: 1
• Product Code: LGW
• UDI-Device Identifier: 00643169781702
• UDI-Public: 00643169781702
• Combination Product (y/n): N
• PMA/PMN Number: P840001
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative
• Type of Report: Initial,Followup,Followup,Followup,Followup
• Report Date: 01/15/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 08/28/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 07/14/2021
• Device Model Number: 97715
• Device Catalogue Number: 97715
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 09/09/2020
• Date Manufacturer Received: 01/14/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1