WRIGHTS LANE SYNTHES USA PRODUCTS LLC 13.0MM REAMER HEAD FOR RIA 2 STERILE; ACCESSORIES, ARTHROSCOPIC
|
Back to Search Results |
|
Model Number 03.404.022S |
Device Problems
Break (1069); Entrapment of Device (1212)
|
Patient Problems
Foreign Body In Patient (2687); No Code Available (3191)
|
Event Date 09/11/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
Additional procode: hto.Complainant part is not expected to be returned for manufacturer review/investigation.(b)(4).Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that during a revision procedure due to a tibial non-union on (b)(6) 2020, while applying force on the ria 2 bone harvesting kit to obtain bone graft, the pieces that attach the reamer head to the shaft splintered off inside the canal of the tibia and the reamer head came off the assembly.The pieces of metal were not able to be retrieved.Not much bone graft was acquired so a larger reamer head was used.While pulling ria2 assembly out, the reamer head got stuck and the plastic shaft snapped.The procedure was successfully completed without a surgical delay.Patient status was unknown.Concomitant device reported: unknown ria drive shaft (part # unknown, lot # unknown, quantity unknown).This report is for one (1) 13.0mm reamer head for ria 2 sterile.This is report 2 of 2 for (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10: additional narrative: h9: 3008812560-10/26/2020-001-c.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
The second reamer head was removed and additional bone graft was added to graft collected from the ria2.Patient was revised to a tibial nail.
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: b5 h6: the instrument(s) was not returned and instead the investigation will be done based on the received image(s).The image(s) was reviewed and the complaint condition for broken could be confirmed as the image shows fragments in the patient on the x-ray and the device picture shows metal that is sharp and looks broken.As the instrument(s) was not returned, an as received condition, dimensional inspection, material, or drawing reviews are not applicable.A definitive assignable root cause could not be determined based on the provided information.During the investigation, no product design issues or discrepancies were observed (based on the images) that may have contributed to the complaint condition.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post market safety surveillance activities.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|
|