A review of the device history record traceable to the reported lot number, indicates that the product was processed and released according to the product¿s acceptance criteria the returned sample was visually inspected and no obvious defects were found.The administration manifold and the infusion cannula line were not returned.The non-invasive flow sensor (nifs) on the cassette housing was in good condition.A calibrated console representing the current software version was used to test the sample.The ball in the drip chamber¿s check valve moved freely per specification.The light-emitting diode (led) rings on the console turned green as the probe connectors were engaged to the console, indicating the proper communication between the probe and the console.The sample could prime and pass intraocular pressure (iop) calibration successfully, with lab stock administration manifold and the infusion cannula.No anomalies were observed during priming.No system message code was generated during testing.Fluid flowed from the balanced salt solution (bss) bottle to the drain bag without any interfering.No leakage was detected from the pump elastomer or on the pump area of the fluidics module.Cleaning process was able to be performed after functional test had completed.The root cause of the customer's complaint could not be established.The returned sample functioned per specifications.After an investigation of this complaint, it has been determined, that this sample functioned per specifications.Therefore, no corrective action is required at this time.The manufacturer internal reference number is: (b)(4).
|