• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MEDTECH SA ROSA ONE COMPUTER-ASSISTED SURGICAL DEVICE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MEDTECH SA ROSA ONE COMPUTER-ASSISTED SURGICAL DEVICE Back to Search Results
Model Number ROSA ONE
Device Problem Malposition of Device (2616)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 01/13/2020
Event Type  malfunction  
Manufacturer Narrative
Unique identifier (udi) #:(b)(4). A full analysis of the logs and of the patient folder has been performed. The eight electrodes have been implanted with an inaccuracy superior to 2 mm at their entry point. A local trend is visible for the electrodes that are close to each other, but it is not possible to consider that a global trend is apparent and therefore to conclude that the electrode deviations are due to a head movement. One of the possible explanation to the deviations that have been observed is that the registration performed was not sufficiently accurate. This can be due to the fact that a 3tesla mri has been used as a 3d reference, which can lead to high distortion of the image. The results of the registration were satisfying but the verification did not allow to confirm the accuracy of the registration. Based on the investigation performed, the technical root cause of the event was determined to be use error - use of a 3t mri as reference.
 
Event Description
This was an issue that was brought up by the surgeon regarding using mri for laser registration. This site along with company representative have been using the mri images to register patients for seeg. The surgeon brought up that his bolts were displaced vertically relative to his plan. During the post op scan, he would see that the bolt was placed a few mm away from where he initially planned. All bolts appear to be placed with this error. The surgeon requested more information into why this error is occurring. He is aware that our company does not recommend using mr for laser registration, but he would like to know why his accuracy is affected regardless. If needed, he will switch to using a ct.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand NameROSA ONE
Type of DeviceCOMPUTER-ASSISTED SURGICAL DEVICE
Manufacturer (Section D)
MEDTECH SA
zac eureka
900 rue du mas de verchant
montpellier, languedoc-roussillon 34000
FR 34000
Manufacturer (Section G)
MEDTECH SA
zac eureka
900 rue du mas de verchant
montpellier, languedoc-roussillon 34000
FR 34000
Manufacturer Contact
jay sharma
1520 tradeport drive
jacksonville, FL 32218
9047414400
MDR Report Key11371740
MDR Text Key233461366
Report Number3009185973-2021-00056
Device Sequence Number1
Product Code HAW
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K182417
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Reporter Occupation Other Health Care Professional
Type of Report Initial
Report Date 02/24/2021
1 Device was Involved in the Event
0 Patients were Involved in the Event:
Date FDA Received02/24/2021
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator
Device Model NumberROSA ONE
Device Catalogue NumberROSAS00203
Device Lot Number3.1.1.1295
Was Device Available for Evaluation? Yes
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Event Location No Information
Date Manufacturer Received01/22/2020
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured09/04/2018
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Reuse
Removal/Correction NumberN/A

-
-