Correction to section h6.Evaluation code conclusion: component code added.H3 device evaluation summary: medtronic conducted an investigation, based upon all information received.It was reported, that the screen of this ht70 ventilator suddenly turned dark and ventilation stopped.The device was available for evaluation.The service personnel (sp) inspected the ventilator and replaced single board computer (sbc), but was unable to confirm the reported issue.The sp also, replaced the inlet filter assembly, due to damage as additional findings.The ventilator passed all tests, calibration and was returned to the customer.One sbc was received by medtronic, for further analysis.Visual inspection found no anomalies.Sbc was installed into a test unit.Unit was powered up and displayed a message that it was unable to load the application software.Software was reinstalled.Unit was powered up and passed post.Allowed unit to ventilate for 90 minutes.No further issues were observed.A failure was isolated to the additional fault with sbc.However, the reported issue was not able to be duplicated.The reported failure was not related to a reported complaint event.The manufacturing records for each device are thoroughly reviewed, prior to release to ensure that it has met all medtronic quality specifications.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|