MAUDE Adverse Event Report: DEPUY MITEK LLC US MICRO TORNADO HP W HANDCONTROL; LINE-POWERED ARTHROSCOPIC SHAVER SYSTEM

Model Number 283512

Device Problems Overheating of Device (1437); Device-Device Incompatibility (2919)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Type  malfunction  

Manufacturer Narrative

If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Udi: (b)(4).To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.

Event Description

It was reported by affiliate in (b)(6) that during a knee arthroscopy procedure on an unknown date, it was observed that the micro tornado hp w hand control device would overheat during use.It was further reported that the blade/burr devices would not attach properly that it would not lock in.Another like device was used to complete the procedure.There were no adverse patient consequences reported.No additional information was provided.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary: the complaint device was received at the service center and evaluated.It was reported that the device was not working.Per service reports, this complaint cannot be confirmed.During the service evaluation the following defects were identified: ¿ cut in the cable the motor cable were replaced to resolve the issues.After repair, the device was found to be working according to the specifications.The faulty parts was identified as the root cause for the device failure during the service evaluation.Manufacturing record evaluation is not required as the reported event is not associated with the manufacturing process and/or the potential cause of the defect cannot be associated to manufacturing.At this point in time, no corrective action is required, and no further action is warranted.Depuy mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.

• Brand Name: MICRO TORNADO HP W HANDCONTROL
• Type of Device: LINE-POWERED ARTHROSCOPIC SHAVER SYSTEM
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• MDR Report Key: 11748476
• MDR Text Key: 251984980
• Report Number: 1221934-2021-01397
• Device Sequence Number: 1
• Product Code: HRX
• UDI-Device Identifier: 10886705016938
• UDI-Public: 10886705016938
• Combination Product (y/n): N
• PMA/PMN Number: K954465
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Type of Report: Initial,Followup
• Report Date: 04/18/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 04/29/2021
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 283512
• Device Catalogue Number: 283512
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 05/10/2021
• Date Manufacturer Received: 07/09/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Removal/Correction Number: N/A
• Patient Sequence Number: 1