MAUDE Adverse Event Report: MEDIANA CO. LTD. NELLCOR; OXIMETER

Model Number PM10N

Device Problems Failure to Power Up (1476); Temperature Problem (3022)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/30/2021

Event Type  malfunction  

Event Description

According to the reporter, prior to use, the device would not power on.The batteries were swapped to isolate the issue.Medtronic's initial evaluation of the incident device found burnt trace at the flex tail circuit that is making it reportable.There was no patient involvement.

Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3 evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted that the switch panel membrane was defective.The issue was resolved by replacing the switch membrane and lcd (liquid crystal display) window as associated parts.It was reported that the unit would not turn on.The reported issue was confirmed.The most likely cause was traced to component failure.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: NELLCOR
• Type of Device: OXIMETER
• Manufacturer (Section D): MEDIANA CO. LTD.; 1650 1 2 donghwa ri munmak eu; kangwon do wonju si 00000 ; KS 00000
• Manufacturer (Section G): MEDIANA CO. LTD.; 1650 1 2 donghwa ri munmak eu; kangwon do wonju si 00000 ; KS 00000
• Manufacturer Contact: clay chandler ; 5920 longbow drive; boulder, CO 80301 ; 3035306409
• MDR Report Key: 13175723
• MDR Text Key: 283321359
• Report Number: 2936999-2022-00013
• Device Sequence Number: 1
• Product Code: DQA
• UDI-Device Identifier: 20884521208787
• UDI-Public: 20884521208787
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K141542
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional
• Reporter Occupation: Biomedical Engineer
• Type of Report: Initial,Followup
• Report Date: 03/07/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 01/06/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: PM10N
• Device Catalogue Number: PM10N
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/06/2021
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/21/2022
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1