Model Number CDI510H |
Device Problem
Leak/Splash (1354)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 12/21/2021 |
Event Type
malfunction
|
Event Description
|
The user facility reported to terumo cardiovascular that during prime, a leakage was observed at the luer lock connector of the shunt sensor.No patient involvement.The product was changed out.Procedure was completed successfully.
|
|
Manufacturer Narrative
|
Terumo has not received the device for evaluation; therefore, the investigation has yet to be completed.Terumo plans on submitting a follow-up report when the investigation is complete and when more information becomes available.
|
|
Manufacturer Narrative
|
This follow-up report is submitted to fda in accord with applicable regulations ¿ and as indicated by terumo cardiovascular systems in the initial report submitted to the fda on january 10, 2022. upon further investigation of the reported event, the following information is new and/or changed: d9 (device availability - added date returned to manufacturer).G3 (date received by manufacturer).G6 (indication that this is a follow-up report).H2 (follow-up due to additional information).H3 (device evaluation anticipated by manufacturer - a second follow-up will be submitted upon completion of the investigation and/or submission of new information, thus tcvs references conclusions code 11.) all available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.
|
|
Manufacturer Narrative
|
This follow-up report is submitted to fda in accord with applicable regulations.Upon further investigation of the reported event, the following information is new and/or changed: h6 (identification of evaluation codes 10, 11, 3331, 213, 67).Type of investigation #1: 10 - testing of actual/suspected device.Type of investigation #2: 11 - testing of device from same lot/batch retained by manufacturer.Type of investigation #2: 3331 - analysis of production records.Investigation findings: 213 - no device problem found.Investigation conclusions: 67 - no problem detected.The returned sample was visually inspected and was noted that there was no sparger assembly and the white luer cap was not the one originally supplied with the unit.It was then leak tested as received by connecting with the calibrated manometer, submerged into a water bath, and pressurized up to 1030 mmhg.It leaked immediately between the white cap that was on the returned unit and large bore adapter.The white luer cap from the retention sample was applied to the returned sample and was leak tested the second time.No leaks were noted.A retention sample from the same lot number was visually inspected and confirmed to have no traces of buffer on the outside of the unit or inside the pouch.It was leak tested the same way and no leaks were noted on the retention sample.The root cause for this event was determined that the white cap that was on the returned unit connected to the large bore adapter did not make a complete seal and caused the leak.All available information has been placed on file in quality management for appropriate tracking, trending and follow-up.
|
|
Search Alerts/Recalls
|
|