MAUDE Adverse Event Report: MEDTRONIC PUERTO RICO OPERATIONS CO. 640G INSULIN PUMP MMT-1711K; PUMP, INFUSION, INSULIN, TO BE USED WITH INVASIVE GLUCOSE SENSOR

Model Number MMT-1711K

Device Problem Break (1069)

Patient Problem Unspecified Tissue Injury (4559)

Event Date 02/04/2022

Event Type  malfunction  

Event Description

Information received by medtronic indicated that the retainer ring of the insulin pump was damage.It was unknown whether the reservoir was able to lock in place or not.No harm requiring medical intervention was reported.The insulin pump will be returned for analysis.Reporter alleges that the use of one or more medtronic minimed 600 series insulin pumps with a damaged, missing, or broken retainer ring caused the claimant to suffer personal injuries.The allegation did not specify the pump identifier (serial number) and therefore all 600 series insulin pumps in possession of the claimant, including this pump, are considered potentially within the scope of the report pending confirmation of the affected serial number(s).When and if the affected serial number is identified, all related reports will be updated accordingly.

Manufacturer Narrative

(b)(4).Currently it is unknown whether or not the device may have caused or contributed to the event as no product has been returned.The device will be returned for analysis and further information will follow once the analysis has been completed.No conclusion can be drawn at this time.The insulin pump involved in this event is the 640g insulin infusion pump, which is not marketed in the united states.However, the device is similar to the paradigm real-time insulin infusion pump, which is marketed in the united states.Medtronic, inc.(medtronic) is submitting this report to comply with 21 c.F.R.Part 803, the medical device reporting regulation.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information in the time allotted and has provided as much information as is available to the company as of the submission date this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employees caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any "defects" or has "malfunctioned".These words are included in the fda 3500a form and are fixed items for selection created by the fda, to categorize the type of event solely for the purpose of reporting pursuant to part 803.Medtronic objects to the use of these words and others like it because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.

Manufacturer Narrative

Pump received with missing retainer ring.Unable to perform displacement test or lock a test p-cap into the reservoir compartment due to missing retainer ring.The following were noted during visual inspection: scratched case, cracked keypad overlay, stained keypad overlay, detached retainer, cracked case-corner of belt clip rails, pillowing keypad overlay, and label damage (faded and peeling).Missing retainer ring confirmed.Medtronic, inc.(medtronic) is submitting this report to comply with 21 c.F.R.Part 803, the medical device reporting regulation.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information in the time allotted and has provided as much information as is available to the company as of the submission date this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employees caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any "defects" or has "malfunctioned".These words are included in the fda 3500a form and are fixed items for selection created by the fda, to categorize the type of event solely for the purpose of reporting pursuant to part 803.Medtronic objects to the use of these words and others like it because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.

• Brand Name: 640G INSULIN PUMP MMT-1711K
• Type of Device: PUMP, INFUSION, INSULIN, TO BE USED WITH INVASIVE GLUCOSE SENSOR
• Manufacturer (Section D): MEDTRONIC PUERTO RICO OPERATIONS CO.; ceiba norte ind. park #50 road; juncos 00777 -386
• Manufacturer (Section G): MEDTRONIC PUERTO RICO OPERATIONS CO.; ceiba norte ind. park #50 road; juncos 00777 -386
• Manufacturer Contact: tricha miles ; ceiba norte ind. park #50 road; juncos 00777--386 ; 7635140379
• MDR Report Key: 13491402
• MDR Text Key: 296293112
• Report Number: 2032227-2022-110760
• Device Sequence Number: 1
• Product Code: OYC
• UDI-Device Identifier: 000000763000192136
• UDI-Public: (01)000000763000192136
• Combination Product (y/n): N
• Reporter Country Code: SI
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Distributor
• Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date: 09/20/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 02/08/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Model Number: MMT-1711K
• Device Catalogue Number: MMT-1711K
• Device Lot Number: HG307KH
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 09/12/2022
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 12/03/2018
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1