Model Number 3ZZ*FX25RECA |
Device Problem
Infusion or Flow Problem (2964)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/15/2022 |
Event Type
malfunction
|
Event Description
|
The user facility reported to terumo cardiovascular that during cardiopulmonary bypass, the oxygenator could not oxygenate the patient well.Per user facility, the customer said that some time after being on bypass he could not oxygenate his patient well.He said po2s dropped to the 80-90s with fio2s at 100% and sweep at 10l.He did not see any physical kink or obstruction so he put a new oxygen line from the hospital o2 source straight into the oxygenator at a rate of 15lpm flow and the po2s did not improve.The pt is 130kg and he was flowing at about 6.5lpm flow.When he rinsed out the oxygenator he did not see any clot present.No known impact or consequence to the patient.Product was not changed out.Procedure was completed successfully.
|
|
Manufacturer Narrative
|
Terumo has received the device for evaluation; however, the investigation has yet to be completed.Terumo plans on submitting a follow-up report when the investigation is complete and when more information becomes available.
|
|
Manufacturer Narrative
|
This follow-up report is submitted to fda in accord with applicable regulations.All available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.
|
|
Manufacturer Narrative
|
This follow-up report is submitted to fda in accord with applicable regulations ¿ and as indicated by terumo cardiovascular systems in the initial report submitted to the fda on march 10, 2022.Upon further investigation of the reported event, the following information is new and/or changed: h6 (identification of evaluation codes 10, 3331, 213, 67).Type of investigation #1: 10 - testing of actual/suspected device.Type of investigation #2: 3331 - analysis of production records.Investigation findings: 213 - no device problem found.Investigation conclusions: 67 - no problem detected.Visual inspection upon receipt found no break or no other obvious anomaly that could lead to the decrease in the gas transfer performance.The actual sample after having been rinsed and dried was tested for its oxygen transfer performance and carbon dioxide removal performance in accordance with the factory's inspection protocol and found to be normal with no issue in the gas transfer.In addition, no problem was found in the manufacturing-related records.All available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.
|
|
Search Alerts/Recalls
|