|
Model Number EUP2515X |
Device Problems
Detachment of Device or Device Component (2907); Material Deformation (2976)
|
Patient Problem
Insufficient Information (4580)
|
Event Date 04/08/2022 |
Event Type
Injury
|
Event Description
|
An attempt was made to use a euphora rx balloon catheter during a procedure to treat a lesion in the left anterior descending (lad) artery.The device was inspected with no issues noted.It was reported that the balloon detached during delivery through the vessel.The device passed through a previously-deployed stent in the obtuse marginal (om).The balloon was inflated and deflated successfully, however; there was calcium in the stent portion and it is believed that the balloon got stuck in the stent struts or calcium.The physician attempted to snare the device but the device would not move.The device was attempted to be pulled out but the detachment occurred.An attempt was made to snare the detached portion but was unsuccessful.An attempt was made to torque the detached portion but this was unsuccessful, so a non-medtronic stent was implanted to cover the detached portion.The detached portion remains in the patient.No further patient injury was reported.
|
|
Manufacturer Narrative
|
If information is provided in the future, a supplemental report will be issued.
|
|
Manufacturer Narrative
|
Product analysis summary: the device returned with a detachment on the hypotube distal to the strain relief.A detachment on the transition shaft was evident.Kinks were evident on the hypotube proximal and distal to the detachment site; kinks were evident along the length of the hypotube.The hypotube material was oval and jagged on both sides of the hypotube detachment site.The transition shaft material was jagged and uneven on the transition shaft detachment site.The transition shaft was stretched, twisted, kinked and torn.The core wire was kinked and protruding through the torn transition shaft material.No other damage evident to the remainder of the device.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Manufacturer Narrative
|
Additional information: annex d and annex g codes added.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Manufacturer Narrative
|
Additional information: an attempt was made to use a euphora rx balloon catheter during a procedure to treat a calcified, tortuous and angulated lesion in t he proximal obtuse marginal (om) artery which was diffusely diseased.The lesion had an existing stent.The device was not kinked and re-straightened during use.Sufficient time was given to allow the balloon to fully deflate prior to attempting removal.Patient age and weight provided.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Search Alerts/Recalls
|
|
|