MAUDE Adverse Event Report: MEDTRONIC PUERTO RICO OPERATIONS CO. SYNCHROMED II; PUMP, INFUSION, IMPLANTED, PROGRAMMABLE

Model Number 8637-40

Device Problem Excess Flow or Over-Infusion (1311)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 07/04/2022

Event Type  malfunction  

Event Description

Information was received from a foreign healthcare provider (hcp) via the manufacturer's representative regarding a patient who was receiving morphine via an implantable pump.On (b)(6) 2022, it was reported that the patient's pump had a volume discrepancy during the implant procedure.When the hcp was preparing the pump for implant, they withdrew 35 ml of water from the pump rather than the expected 37.5 ml.It was confirmed that the patient did not experience symptoms related to the issue.The hcp changed needles and syringes several times, using a new filling kit, and aspirated gently to not activate the non-return valve.To be certain of the volume recovered, the hcp filled the pump with 20 ml of saline solution and emptied the pump again, recovering only 20 ml.There were no environmental/external/patient factors that might have led or contributed to the issue.The issue was considered resolved at the time of the report.The patient's status was listed as "alive - no injury".

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Review of this mdr and/or additional information received shows that there is no information to reasonably suggest that the device in this report may have caused or contributed to a death or serious injury or that the device in this report has malfunctioned.Therefore, this event did not and does not meet the reporting requirements stipulated in 21 cfr 803.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: SYNCHROMED II
• Type of Device: PUMP, INFUSION, IMPLANTED, PROGRAMMABLE
• Manufacturer (Section D): MEDTRONIC PUERTO RICO OPERATIONS CO.; road 31, km. 24, hm 4; ceiba norte industrial park; juncos PR 00777
• Manufacturer (Section G): MEDTRONIC PUERTO RICO OPERATIONS CO.; road 31, km. 24, hm 4; ceiba norte industrial park; juncos PR 00777
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 14983081
• MDR Text Key: 302780266
• Report Number: 3004209178-2022-08760
• Device Sequence Number: 1
• Product Code: LKK
• Combination Product (y/n): N
• Reporter Country Code: FR
• PMA/PMN Number: P860004
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 07/13/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/11/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 08/14/2022
• Device Model Number: 8637-40
• Device Catalogue Number: 8637-40
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 07/04/2022
• Date Device Manufactured: 02/25/2021
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Sex: Female