MAUDE Adverse Event Report: W.L. GORE & ASSOCIATES GORE® DUALMESH® PLUS BIOMATERIAL; MESH, SURGICAL, POLYMERIC

Model Number 1DLMCP05

Device Problem Output Problem (3005)

Patient Problem Unspecified Infection (1930)

Event Date 02/08/2011

Event Type  Injury  

Manufacturer Narrative

Updated health effect.Updated investigation finding.Updated investigation conclusions.(b)(4).The investigation has been completed.Based upon the totality of the information received over the course of the investigation and reported by gore in the previously submitted medical record narratives the following conclusions have been reached.As previously reported, all pertinent medical records requested may not have been received.In the absence of additional information or medical records from the complainant, this event file will be closed with the information provided.Previous patient codes were reported based on the original complaint and are no longer applicable and/or not reportable per gore¿s investigation.It should be noted that the gore® dualmesh® plus biomaterial instructions for use include warnings and addresses the following adverse reactions among others: ¿possible adverse reactions with the use of any tissue deficiency prosthesis may include, but are not limited to, contamination, infection, inflammation, adhesion, fistula formation, seroma formation, hematoma, and recurrence.¿ the instructions for use further warn: ¿as with any implantable surgical device, strict aseptic techniques should be followed.If an infection develops, it should be treated aggressively.An unresolved infection may require removal of the material.¿ procedure and specific patient factors may contribute to or cause infection, leading to contamination, exposure, lack of incorporation and/or seeding of device.Procedure related factors may include adherence to clinical guidelines on infection risk management, contamination of device prior to or during implant, and post-operative persistent/symptomatic seroma and wound management.Patient risk factors may include diabetes, smoking, age, malnutrition, immunosuppressive therapy, post-operative instruction noncompliance, and hygiene.There is insufficient information available for gore to reasonably draw conclusions related to aspects of the event, therefore "cause not established¿ is being used.Insufficient information may include limited or missing relevant medical records, involvement of multiple implanted devices (including non-gore devices) in the field of treatment, patient non-compliance, and/or a general lack of available detail or specificity related to an adverse event and/or device.As with any surgical procedure, there are always risks of complications for surgical repair of hernias and soft tissue deficiencies, with or without mesh.These may include but are not limited to, adhesions and related harms, bleeding, bowel obstruction, compromised device biocompatibility, contamination which may lead to patient harms, device damage, dysphagia, erosion or extrusion and related harms, exposure or protrusion and related harms, fever, fistula, gerd recurrence, defect recurrence and related harms, ileus, increased procedure time and related harms, irritation or inflammation, infection, mesh migration, mesh contraction, pain, paresthesia, perforation, revision/re-intervention, seroma or hematoma and related harms, tissue ischemia, wound complications and wound dehiscence and additional intervention including surgery.Many of the potential complications are associated with the patient¿s underlying disease progression, co-morbidities, additional medical history and/or other surgical procedures.The above inherent risks are typically detailed in standard informed consent documents.The partial device was not able to be returned to gore for evaluation; therefore, a direct product analysis could not be conducted.Based upon the information received, part of the device remains in the patient and was not available for evaluation.Review of the manufacturing and sterilization records verified that the lot met all pre-release specifications.Name: plus antimicrobial product coating, manufacturer/compounder: w.L.Gore & associates, inc., lot number: 7675691.Additional manufacturer narrative: the plus antimicrobial product coating contains silver carbonate [approximately 800 micrograms per cubic centimeter of product (g/cm3)], and chlorhexidine diacetate [approximately 1600 micrograms per cubic centimeter of product (g/cm3)].

Event Description

It was reported to gore that the patient underwent open ventral hernia repair on (b)(6) 2010 whereby two gore-tex® soft tissue patches were implanted.The complaint alleges that on (b)(6) 2011, an additional procedure occurred whereby the gore devices were explanted and a third gore device was implanted.It was reported the patient alleges the following injuries: recurrent ventral hernia due to mesh failure; densely adhered to bowel loops; pain & suffering.Additional event specific information was not provided.

Manufacturer Narrative

H6: updated health effect.H6: updated investigation finding.H6: updated investigation conclusions.H6: health effect impact code: f1903: device explantation.H6: medical device component: g04088: membrane.The investigation has been completed.Based upon the totality of the information received over the course of the investigation and reported by gore in the previously submitted medical record narratives the following conclusions have been reached.As previously reported, all pertinent medical records requested may not have been received.In the absence of additional information or medical records from the complainant, this event file will be closed with the information provided.Previous patient codes were reported based on the original complaint and are no longer applicable and/or not reportable per gore¿s investigation.It should be noted that the gore® dualmesh® plus biomaterial instructions for use include warnings and addresses the following adverse reactions among others: ¿possible adverse reactions with the use of any tissue deficiency prosthesis may include, but are not limited to, contamination, infection, inflammation, adhesion, fistula formation, seroma formation, hematoma, and recurrence.¿ the instructions for use further warn: ¿as with any implantable surgical device, strict aseptic techniques should be followed.If an infection develops, it should be treated aggressively.An unresolved infection may require removal of the material.¿ procedure and specific patient factors may contribute to or cause infection, leading to contamination, exposure, lack of incorporation and/or seeding of device.Procedure related factors may include adherence to clinical guidelines on infection risk management, contamination of device prior to or during implant, and post-operative persistent/symptomatic seroma and wound management.Patient risk factors may include diabetes, smoking, age, malnutrition, immunosuppressive therapy, post-operative instruction noncompliance, and hygiene.There is insufficient information available for gore to reasonably draw conclusions related to aspects of the event, therefore conclusion code ¿d15: cause not established¿ is being used.Insufficient information may include limited or missing relevant medical records, involvement of multiple implanted devices (including non-gore devices) in the field of treatment, patient non-compliance, and/or a general lack of available detail or specificity related to an adverse event and/or device.As with any surgical procedure, there are always risks of complications for surgical repair of hernias and soft tissue deficiencies, with or without mesh.These may include but are not limited to, adhesions and related harms, bleeding, bowel obstruction, compromised device biocompatibility, contamination which may lead to patient harms, device damage, dysphagia, erosion or extrusion and related harms, exposure or protrusion and related harms, fever, fistula, gerd recurrence, defect recurrence and related harms, ileus, increased procedure time and related harms, irritation or inflammation, infection, mesh migration, mesh contraction, pain, paresthesia, perforation, revision/re-intervention, seroma or hematoma and related harms, tissue ischemia, wound complications and wound dehiscence and additional intervention including surgery.Many of the potential complications are associated with the patient¿s underlying disease progression, co-morbidities, additional medical history and/or other surgical procedures.The above inherent risks are typically detailed in standard informed consent documents.The partial device was not able to be returned to gore for evaluation; therefore, a direct product analysis could not be conducted.Based upon the information received, part of the device remains in the patient and was not available for evaluation.Review of the manufacturing and sterilization records verified that the lot met all pre-release specifications.Section c1: name: plus antimicrobial product coating.Manufacturer/compounder: w.L.Gore & associates, inc.Lot number: 7675691.Additional manufacturer narrative: the plus antimicrobial product coating contains silver carbonate [approximately 800 micrograms per cubic centimeter of product (g/cm3)], and chlorhexidine diacetate [approximately 1600 micrograms per cubic centimeter of product (g/cm3)].W.L.Gore & associates, inc.(gore) is submitting this report to comply with 21 c.F.R.Part 803, the medical device reporting regulation.This report is based upon information obtained by gore, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Blank fields present on this report include required fields and fields determined to be not applicable.Blank required fields indicate that the information was not provided, was deemed unavailable or was not applicable.This report does not constitute an admission or a conclusion by fda, gore, or its associates that the device, gore or its associates caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any "defects" or has "malfunctioned".These words are included in the report and are fixed items for selection created by the fda, to categorize the type of event solely for the purpose of reporting pursuant to part 803.This statement should be included with any information or report disclosed to the public under the freedom of information act.

• Brand Name: GORE® DUALMESH® PLUS BIOMATERIAL
• Type of Device: MESH, SURGICAL, POLYMERIC
• Manufacturer (Section D): W.L. GORE & ASSOCIATES; flagstaff AZ
• Manufacturer (Section G): MPD APC B/P; p.o. box 1408; elkton MD 21922 1408
• Manufacturer Contact: rena gros ; 1500 n. 4th street; 9285263030
• MDR Report Key: 14988563
• MDR Text Key: 295716965
• Report Number: 3003910212-2022-00007
• Device Sequence Number: 1
• Product Code: FTL
• UDI-Device Identifier: 00733132601127
• UDI-Public: 00733132601127
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K063435
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup
• Report Date: 07/19/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/12/2022
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Expiration Date: 12/31/2012
• Device Model Number: 1DLMCP05
• Device Catalogue Number: 1DLMCP05
• Device Lot Number: 7675691
• Was Device Available for Evaluation?: No
• Was the Report Sent to FDA?: No
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 01/26/2010
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Hospitalization; Required Intervention
• Patient Age: 41 YR
• Patient Sex: Male