MAUDE Adverse Event Report: SYNTHES GMBH OSCILLATING SAW ATTACHMENT II; BLADE, SAW, GENERAL & PLASTIC SURGERY, SURGICAL

Catalog Number 511.801

Device Problem Excessive Heating (4030)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/01/2022

Event Type  malfunction  

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for this medwatch, a supplemental medwatch report will be filed as appropriate.Additional narrative: this device was returned for service; however, did not meet manufacturing specifications during pre-repair assessment.However, since the investigation is still on-going, the assignable root cause could not be determined at this time.Once investigation has been completed, a supplemental medwatch will be submitted accordingly.Udi: (b)(4).

Event Description

It was reported by netherlands that during service and evaluation, it was determined that the oscillating saw attachment battery drive device generated heat.It was further observed that the device had corrosion/rusting/pitting and did not function.This event did not occur during surgery.There was no patient involvement.There were no reports of injuries, medical intervention or prolonged hospitalization.The exact date of the event was unknown.However, it was reported that the event occurred in 2022.All available information has been disclosed.If additional information should become available, a supplemental medwatch will be submitted accordingly.

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for this medwatch, a supplemental medwatch report will be filed as appropriate.Device evaluation: the actual device was returned for evaluation.During repair, an evaluation was performed, and it was determined that the device produced heat, did not function and had corrosion/rusting/pitting.It was further determined that the device failed pretest for check function in running mode.Therefore, the reported condition was confirmed.The assignable root cause was determined to be due to component failure from wear.

• Brand Name: OSCILLATING SAW ATTACHMENT II
• Type of Device: BLADE, SAW, GENERAL & PLASTIC SURGERY, SURGICAL
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer Contact: kate karberg ; eimattstrasse 3; oberdorf 4436 ; SZ 4436 ; 3035526892
• MDR Report Key: 15138519
• MDR Text Key: 304815002
• Report Number: 8030965-2022-05449
• Device Sequence Number: 1
• Product Code: GFA
• UDI-Device Identifier: 07611819102262
• UDI-Public: 07611819102262
• Combination Product (y/n): N
• Reporter Country Code: NL
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,User Facility,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date: 08/01/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 08/01/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 511.801
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 07/14/2022
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 08/18/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 12/01/2020
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1