MAUDE Adverse Event Report: MEDTRONIC PUERTO RICO OPERATIONS CO. SYNCHROMED II; PUMP, INFUSION, IMPLANTED, PROGRAMMABLE

Model Number 8637-20

Device Problem Pumping Stopped (1503)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 08/12/2022

Event Type  Injury  

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.

Event Description

Information received from a healthcare professional (hcp) regarding a patient receiving intrathecal medication bupivacaine 30 mg/ml at 6.445 mg/day and morphine 22.5 mg/ml at 4.834 mg/day for spinal pain via an implantable pump.It was reported the patient (pt) had a pump motor stall and stop pump duration exceeding 48 hours alarm.The caller stated the patient tripped and fell outside around the same time the motor stall occurred on (b)(6) 2022.It was confirmed the patient did not recently have an mri or other electromagnetic interference (emi).The issue was not resolved through troubleshooting and no patient symptoms were reported.The patient's relevant medical history included the patient had been in the hospital last week for reasons unrelated to the pump and was released home on (b)(6) 2022.

Event Description

Additional information was received from a healthcare provider (hcp) via company representative (rep) regarding the motor stall that occurred on (b)(6) 2022.It was reported that at patient's refill on (b)(6) 2022, the pump showed motor stall on (b)(6) 2022 with no recovery.The pump was replaced on (b)(6) 2022.The issue was resolved at the time of report.The patient's weight and medical history were asked, but will not be made available.The patient's status at time of report was alive - no injury.No symptoms were reported.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3.Analysis of the pump (serial #(b)(6) confirmed that a motor stall occurred, but a cause could not be determined.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3.Analysis of the pump identified an anomaly of the pumphead roller wheel; bearing degradation.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: SYNCHROMED II
• Type of Device: PUMP, INFUSION, IMPLANTED, PROGRAMMABLE
• Manufacturer (Section D): MEDTRONIC PUERTO RICO OPERATIONS CO.; road 31, km. 24, hm 4; ceiba norte industrial park; juncos PR 00777
• Manufacturer (Section G): MEDTRONIC PUERTO RICO OPERATIONS CO.; road 31, km. 24, hm 4; ceiba norte industrial park; juncos PR 00777
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 15251293
• MDR Text Key: 305175011
• Report Number: 3004209178-2022-10533
• Device Sequence Number: 1
• Product Code: LKK
• UDI-Device Identifier: 00763000422608
• UDI-Public: 00763000422608
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P860004
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Remedial Action: Recall
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 08/28/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 08/18/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 02/28/2023
• Device Model Number: 8637-20
• Device Catalogue Number: 8637-20
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 08/24/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 09/03/2021
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Removal/Correction Number: Z-0497-2013
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention
• Patient Age: 69 YR
• Patient Sex: Male