MAUDE Adverse Event Report: SYNTHES GMBH 2.0MM KIRSCHNER WIRE W/ DRILL TIP/100MM; PLATE, FIXATION, BONE

Model Number 02.111.902.01

Device Problem Material Deformation (2976)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 09/06/2022

Event Type  malfunction  

Event Description

Device report from synthes reports an event in canada as follows: it was reported on (b)(6) 2022, that 2.0mm drill tip wire became stuck in cannulation of compression/distraction device.Surgeon was able to remove the wire with pliers but cannulation was unusable.Case continued with only using wires in 3 remaining holes of compression/distraction device.On inspection after the case the wires in the set all looked heavily used and blunt/bent so were discarded.Ulna shortening osteotomy.Surgery was delayed for 5 minutes and more.Procedure was successfully completed.No fragments were generated.Patient status/ outcome / consequences: no.This report is for one (1)2.0mm kirschner wire w/ drill tip/100mm.This is report 9 of 11 for complaint (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Additional narrative: additional product code: hwc.Complainant part is not expected to be returned for manufacturer review/investigation.Reporter is a j&j sales representative.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: 2.0MM KIRSCHNER WIRE W/ DRILL TIP/100MM
• Type of Device: PLATE, FIXATION, BONE
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 15491398
• MDR Text Key: 306328358
• Report Number: 8030965-2022-07389
• Device Sequence Number: 1
• Product Code: HRS
• UDI-Device Identifier: 10886982032492
• UDI-Public: (01)10886982032492
• Combination Product (y/n): N
• Reporter Country Code: CA
• PMA/PMN Number: K113364
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 09/27/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 02.111.902.01
• Device Catalogue Number: 02.111.902.01
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 09/06/2022
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: Yes
• Type of Device Usage: Unknown
• Patient Sequence Number: 1