MAUDE Adverse Event Report: MEDTRONIC MEXICO CUSTOM TUBING PACK; TUBING, PUMP, CARDIOPULMONARY BYPASS

Model Number BB11W05R

Device Problem Fluid/Blood Leak (1250)

Patient Problems Hemorrhage/Bleeding (1888); No Clinical Signs, Symptoms or Conditions (4582)

Event Date 10/03/2022

Event Type  malfunction  

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information that during use of a custom tubing pack, it was reported that one side of the vrv-100 one way valve was not solvent bonded completely during the line assembly and a small leak of blood was observed around the tubing and the vrv100 connection.There was no patient impact associated with this event.

Manufacturer Narrative

Medtronic received additional information that the leak was from the component and not the tubing.There was no visible air in the system/tubing.The customer stated that approximately 10 to 15 mls of blood was lost because of the leak and a transfusion was not required because of the leak.The same leak did not appear in multiple packs.Device evaluation summary: visual inspection showed a section of the bond between the upper and lower housing was separated.During the cleaning process there was a leak between the two housings.The reason for return was confirmed.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Conclusion: the complaint was confirmed for damage.Analysis showed that the upper housing was broken off.Review of the device history record found no abnormalities during manufacturing that would cause or contribute to the reported event.There is a potential this was caused by the supplier.The supplier will be notified about the issue and will implement corrective actions if needed.Assessment against the medtronic risk management file process failure mode and effects analysis (pfmeca) document indicates that the current risk zone does not exceed the risk zone predicted in the product pfmeca.Trends for issues with this device are monitored.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: CUSTOM TUBING PACK
• Type of Device: TUBING, PUMP, CARDIOPULMONARY BYPASS
• Manufacturer (Section D): MEDTRONIC MEXICO; av. paseo del cucapah #10510; tijuana,bc 22570 ; MX 22570
• Manufacturer (Section G): MEDTRONIC MEXICO; av. paseo del cucapah #10510; tijuana,bc 22570 ; MX 22570
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 15549406
• MDR Text Key: 306779173
• Report Number: 9612164-2022-03680
• Device Sequence Number: 1
• Product Code: DWE
• UDI-Device Identifier: 00763000686130
• UDI-Public: 00763000686130
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K171308
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date: 11/30/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/06/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 03/26/2024
• Device Model Number: BB11W05R
• Device Catalogue Number: BB11W05R
• Device Lot Number: 224826794
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 11/04/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 08/01/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1