• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: STRYKER GMBH ONE-THIRD TUBULAR PLATE VARIAX 2 ONE-THIRD TUBULAR 7 HOLE / L83MM; PLATE, FIXATION, BONE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

STRYKER GMBH ONE-THIRD TUBULAR PLATE VARIAX 2 ONE-THIRD TUBULAR 7 HOLE / L83MM; PLATE, FIXATION, BONE Back to Search Results
Model Number 626677S
Device Problems Break (1069); Fracture (1260)
Patient Problem Failure of Implant (1924)
Event Date 10/18/2022
Event Type  Injury  
Event Description
It was reported that a few day after the surgery the plate fractured.The fractured plate was removed and replaced with two plates.
 
Manufacturer Narrative
Once the investigation has been completed any additional information will be reported in a supplemental report.
 
Manufacturer Narrative
The reported event could be confirmed, since the plate is broken apart as reported.The device inspection revealed the following: the visual inspection has shown that the plate is broken apart between the forth and third hole.The microscopic evaluation shows that the fracture face has the typical view of a fatigue fracture with uniform fine-grained texture over almost the complete surface.The breakage started on the right side, where the shiny surfaces indicate that the fragments rubbed against each other during the crack progress before the plate completely broke apart.The relevant dimensions were verified during the investigation and no deviation from the specification could be detected.A review of the device history for the reported lot did not indicate any abnormalities.No corrective actions are required at this time.A review of the labeling did not indicate any abnormalities.No indications of material, manufacturing or design related problems were found during the investigation.The plate was returned for evaluation and no product related issue could be detected.There was no additional information, such as x-rays, operation reports, patient history or activity, provided.Therefore the root cause of the breakage cannot be defined.The evaluation of the plate has shown that the implant could not resist the applied force which finally led to the material overload / fatigue failure of the device.In this relation following statements of the variax 2 one-third tubular instructions for use can be pointed out: ¿always exercise care in selecting the proper type and size of implant.Improper selection, placement and fixation of the implant components may result in early implant failure.Implants can be available in different versions, varying for example in length, diameter, angle, right-hand and left-hand versions, material and number of drilled holes.The correct selection of the fracture fixation appliance is extremely important.Failure to use the appropriate appliance for the fracture condition may accelerate clinical failure.Failure to use the proper component to maintain adequate blood supply and provide rigid fixation may result in loosening, bending, cracking or fracture of the device and/or bone.The correct implant size for a given patient can be determined by evaluating the patient¿s height, weight, functional demands and anatomy.Every implant must be used in the correct anatomic location, consistent with accepted standards of internal fixation." if more information is provided, the case will be reassessed.
 
Event Description
It was reported that a few day after the surgery the plate fractured.The fractured plate was removed and replaced with two plates.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ONE-THIRD TUBULAR PLATE VARIAX 2 ONE-THIRD TUBULAR 7 HOLE / L83MM
Type of Device
PLATE, FIXATION, BONE
Manufacturer (Section D)
STRYKER GMBH
bohnackerweg 1
postfach
selzach 2545
SZ  2545
Manufacturer (Section G)
STRYKER GMBH
bohnackerweg 1
postfach
selzach 2545
SZ   2545
Manufacturer Contact
anna jusinski
325 corporate drive
mahwah, NJ 07430
2018315000
MDR Report Key15797400
MDR Text Key303639345
Report Number0008031020-2022-00612
Device Sequence Number1
Product Code HRS
UDI-Device Identifier07613327088762
UDI-Public07613327088762
Combination Product (y/n)N
Reporter Country CodeJA
PMA/PMN Number
K151879
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Distributor
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 02/06/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received11/15/2022
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Lay User/Patient
Device Model Number626677S
Device Catalogue Number626677S
Device Lot NumberH40049
Was Device Available for Evaluation? Device Returned to Manufacturer
Is the Reporter a Health Professional? No
Date Manufacturer Received01/10/2023
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured06/11/2021
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
Patient Age44 YR
Patient SexMale
Patient Weight65 KG
-
-