Model Number ZA9003 |
Device Problem
Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problem
Visual Disturbances (2140)
|
Event Type
Injury
|
Event Description
|
It was reported that the fully inserted intraocular lens (iol) was explanted from the patient's left eye during a secondary procedure due to visual disturbances.The issue was first observed after implantation.The patient's symptoms persisted for 2 months.A non-johnson and johnson iol was implanted as replacement.No vitrectomy, suture, or incision enlargement was required.No medication was prescribed.Directions for use were followed.The patient is fully recovered.No further information was provided.
|
|
Manufacturer Narrative
|
Date of event: the best estimate date is between (b)(6) 2022 and (b)(6) 2022.Device evaluation: the device was not returned at the manufacturing site; therefore, product testing could not be performed, and the customer¿s reported complaint could not be verified.Manufacturing record review: the manufacturing records for the intraocular lens were reviewed.The manufacturing records review shows that the units were released within specification.Conclusion: as a result of the investigation there is no indication of a product quality deficiency, and the reported issue could not be confirmed.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Manufacturer Narrative
|
Additional information: section d9: device available for evaluation? yes.Section d9: date returned to manufacturer: dec 08, 2022.Section h3: evaluated by manufacturer: yes.Device evaluation: visual inspection under magnification revealed that the complaint lens was received coated in viscoelastic residue and cut in half.The lens was cleaned and, no issues that could cause or contribute to this issue were identified.Based on the return condition of this lens, no further product evaluation could be performed.The complaint issue was not confirmed.The other observed issues during the product evaluation could not be confirmed to be related to a manufacturing or design issue.Therefore, there is no indication of a product deficiency or product malfunction.Conclusion: as a result of the investigation there is no indication of a product quality deficiency, and the reported issue could not be verified.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Search Alerts/Recalls
|
|