Catalog Number 8065752066 |
Device Problem
Break (1069)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 12/01/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Investigation including root cause analysis is in progress.A supplemental mdr will be filed as necessary in accordance with 21 cfr 803.56 when additional reportable information becomes available.The manufacturer internal reference number is: (b)(4).
|
|
Event Description
|
A pharmacist reported tip of the pak broke during surgery.There was no shock, due to vibrations during use.There was no patient harm.
|
|
Event Description
|
D.3.Product manufacturing site updated due to receipt of [product information]
g.9.Manufacturer report number corrected and reported under [2523835-2023-00080]
d.4.Lot number information updated.
|
|
Manufacturer Narrative
|
D.3.Product manufacturing site updated due to receipt of [product information] g.9.Manufacturer report number corrected and reported under [2523835-2023-00080] d.4.Lot number information updated the manufacturer internal reference number is: (b)(4).
|
|
Manufacturer Narrative
|
One opened phacoemulsification tip broken in a wrench within a bag was received.The phacoemulsification tip was visually inspected and was found to be nonconforming, the phacoemulsification tip was broken at the cone to cannula transition area.The break was very jagged with a thin wall and there were cracks on both pieces at the break area.There was wear on the threads, back of flange and nut corners that were consistent with threading on a handpiece.A review of the device history record traceable to the reported lot number, indicates that the reported product was processed and released according to the reported product¿s acceptance criteria.The reason for breakage is due to an uneven wall thickness creating a weak region at the thinner section.The uneven wall thickness is a manufacturing issue created at the machining process for the phacoemulsification tips.All phacoemulsification tips are 100% visually inspected by trained operators using 30x magnification throughout the manufacturing process.Complaints are reviewed and monitored at regular intervals for any significant adverse trends.The manufacturer internal reference number is:(b)(4).
|
|
Search Alerts/Recalls
|